
LevelSensor v2.0
lucasnoce/IC-LevelSensor_v2
Water level sensor with NBIoT data transmission

A robotics controller PCB project using an STM32 microcontroller, dual motor drivers, sensor interfaces, and power management, designed using KiCad.
Sumobot pcb is an open-source printed circuit board by keer-nova74, from the keer-nova74/STM32-Sumo-Robot-Controller-PCB repository on GitHub. It is a 4-layer board of 97.7 × 58.5 mm with 111 parts on 99 nets, routed with 805 tracks and 206 vias.
It is built around the STM32L476RGT6, RT8259GE and AMS1117-3.3, with the TPS2116DRL, USBLC6-2SC6 and B5819W among its other parts. Its parts include 36 capacitors, 23 resistors, 16 connectors, 10 diodes and 8 ICs. It belongs with the robots and motor control and sensors and measurement boards and the STM32 boards of this library.
STM32 Sumo Robot Controller PCB
Overview
This project focuses on designing a custom Printed Circuit Board (PCB) for an autonomous sumo robot using KiCad. The controller is intended to integrate a microcontroller, motor drivers, sensor interfaces, and power management into a compact robotics hardware platform.
Project Status: In Progress
Planned Features
Hardware Design
The PCB design will be developed around the following functional blocks:
Block| Purpose Microcontroller| Executes robot control logic Motor driver| Controls the direction and speed of two DC motors Infrared sensors| Supports opponent detection and ring-boundary detection Power management| Supplies appropriate voltages to the controller and peripherals Communication and debugging| Provides access for programming and troubleshooting Expansion connectors| Allows additional sensors and peripherals to be connected
Final components and circuit specifications will be confirmed during the design process.
Design Tools
Design Workflow
Learning Objectives
Project Deliverables
The repository will contain the following files as the design progresses:
Current Status
The project is currently in the planning and design stage. Components, schematic connections, PCB routing, and electrical checks will be completed and documented as development progresses.
Future Improvements
Author's Notes
This project is intended to develop practical skills in PCB design, embedded hardware, and robotics electronics. Design decisions and improvements will be documented as the project develops.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10u | Capacitor_SMD:C_0805_2012Metric | C17, C19, C22, C26, C30, C31, C34, C35 |
| 7 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C20, C23, C28, C29, C32, C33, C36 |
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C6, C7, C8, C9, C12, C13 |
| 7 | RED_LED | LED_SMD:LED_0603_1608Metric | D3, D4, D6, D7, D8, D9, D10 |
| 6 | 10K | Resistor_SMD:R_0805_2012Metric | R2, R5, R6, R7, R8, R12 |
| 5 | 470R | Resistor_SMD:R_0805_2012Metric | R19, R20, R21, R22, R23 |
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C4, C27 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 3 | 220R | Resistor_SMD:R_0805_2012Metric | R9, R17, R18 |
| 3 | 22u | Capacitor_SMD:C_0805_2012Metric | C18, C24, C25 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FM1, FM2, FM3 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R1, R10 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C5, C21 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric | C14, C15 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R15, R16 |
| 2 | 5K1 | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 750mA | Fuse:Fuse_1206_3216Metric | F1, F2 |
| 2 | 8.2p | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | B5819W | Schottky Diode Custom:B5819W SOD123 | D1, D2 |
| 2 | TB6612FNG | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U7, U8 |
| 1 | 1206L110TH1 | 1206L110TH1_SMT:1206L110THYR_SMT | F3 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 12k | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 16MHz | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | X2 |
| 1 | 32KHz768 | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | X1 |
| 1 | 33K | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 6.8uH | MWSA0518S-6R8MT:MWSA0518S-6R8MT | L1 |
| 1 | 62k | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | BATT1_CONN | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J1 |
| 1 | BATT2_CONN | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J3 |
| 1 | Conn_ARM_JTAG_SWD_20 | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J4 |
| 1 | EXTRA PWR_PINS | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | FDS6681Z | FDS6681Z:FDS6681Z_Footprint | Q1 |
| 1 | LD_BACK_LEFT_CONN | Connector_JST:JST_PH_S3B-PH-SM4-TB_1x03-1MP_P2.00mm_Horizontal | J12 |
| 1 | LD_BACK_RIGHT_CONN | Connector_JST:JST_PH_S3B-PH-SM4-TB_1x03-1MP_P2.00mm_Horizontal | J13 |
| 1 | LD_FRONT_LEFT_CONN | Connector_JST:JST_PH_S3B-PH-SM4-TB_1x03-1MP_P2.00mm_Horizontal | J10 |
| 1 | LD_FRONT_RIGHT_CONN | Connector_JST:JST_PH_S3B-PH-SM4-TB_1x03-1MP_P2.00mm_Horizontal | J11 |
| 1 | LOGO | LOGO_FOOTPRINT:sumobot_wrestling_logo | G*** |
| 1 | MOTOR_LEFT_BACK_CONN | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J15 |
| 1 | MOTOR_LEFT_FRONT_CONN | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J14 |
| 1 | MOTOR_RIGHT_BACK_CONN | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J17 |
| 1 | MOTOR_RIGHT_FRONT_CONN | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J16 |
| 1 | RT8259 | RT8259GE:RT8259GE_RT8259GE SOT-23-6 Surface Mount | U3 |
| 1 | STM32L476RGT6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3SL-1002P | SW2 |
| 1 | SW_SPST | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | TEST_LED_PINS | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | TPS2116DRL | Package_TO_SOT_SMD:SOT-583-8 | U5 |
| 1 | TSOP382xx | OptoDevice:Vishay_MINICAST-3Pin | U6 |
| 1 | UART_CONN | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J8 |
| 1 | URM09_CONN | Connector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J7 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | WHITE_LED | LED_SMD:LED_0603_1608Metric | D5 |

lucasnoce/IC-LevelSensor_v2
Water level sensor with NBIoT data transmission

freakontrol/stmbl
THE AUTHORS OF THIS SOFTWARE ACCEPT ABSOLUTELY NO LIABILITY FOR ANY HARM OR LOSS RESULTING FROM ITS USE. IT IS EXTREMELY UNWISE TO RELY ON SOFTWARE ALONE FOR SAFETY.






It measures 97.7 × 58.5 mm and has 4 copper layers, 1.58 mm thick.
111 parts, built around the STM32L476RGT6, RT8259GE, AMS1117-3.3 and TPS2116DRL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the keer-nova74/STM32-Sumo-Robot-Controller-PCB repository on GitHub, at the commit this page was made from: the board is sumobot pcb.kicad_pcb and its schematic sumobot pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask keer-nova74 before reusing the design.