Skip to the content

STM32L476RGT6

STMicroelectronicsExtended

-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 1MB 32 Bit 51 80MHz ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS

Part id
st/STM32L476RGT6
Category
Microcontrollers (MCU, MPU, SOC)
Package
LQFP-64(10x10)
Pins
64
In stock
8 at JLCPCB (C74797)
Used on
18 open-source boards

Overview

The STM32L476RGT6 is a microcontroller made by STMicroelectronics in a LQFP-64(10x10) package with 64 pins. -40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 1MB 32 Bit 51 80MHz ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_ST_STM32L4:STM32L476RGTx, from KiCad's library) and its footprint (Package_QFP:LQFP-64_10x10mm_P0.5mm, from KiCad's library), ready for a KiCad board. 8 are in stock at JLCPCB (part C74797). 18 open-source boards in 16 repositories on GitHub use it.

Symbol

1VBAT2PC133PC144PC155PH06PH17NRST8PC09PC110PC211PC312VSSA13VDDA14PA015PA116PA217PA318VSS19VDD20PA421PA522PA623PA724PC425PC526PB027PB128PB229PB1030PB1132VDD33PB1234PB1335PB1436PB1537PC638PC739PC840PC941PA842PA943PA1044PA1145PA1246PA1348VDDUSB49PA1450PA1551PC1052PC1153PC1254PD255PB356PB457PB558PB659PB760BOOT061PB862PB964VDD
MCU_ST_STM32L4:STM32L476RGTxFrom KiCad's library

Footprint

Package_QFP:LQFP-64_10x10mm_P0.5mmFrom KiCad's library

From the datasheet

19
Supply, least
1.71 V · VDD, recommended operating min · p. 118
Supply, most
3.6 V · VDD, recommended operating max · p. 118
Supply, absolute maximum
4 V · VDD, external main supply absolute max · p. 115
Supply, least
1.62 V · VDDA, ADC or COMP used, recommended operating min · p. 118
Supply, least
1.8 V · VDDA, DAC or OPAMP used, recommended operating min · p. 118
Supply, least
2.4 V · VDDA, VREFBUF used, recommended operating min · p. 118
Supply, least
1.55 V · VBAT, backup recommended operating min · p. 118
Supply, least
3 V · VDDUSB, USB used, recommended operating min · p. 118
Works from
-40 °C · suffix 6 operating ambient min · p. 264
Works up to
85 °C · suffix 6 operating ambient max · p. 264
Junction, hottest
105 °C · suffix 6 operating junction max · p. 264
Junction, hottest
150 °C · absolute maximum junction temperature · p. 117
Takes working
10.2 mA · sum of MCU supplies, typical Run, 80 MHz, Range 1, 25 °C, Flash ART enabled, peripherals disabled · p. 125
Takes at most
12.1 mA · sum of MCU supplies, max Run at 85 °C, 80 MHz, Range 1, Flash ART enabled, peripherals disabled · p. 125
Takes asleep
150 nA · sum of MCU supplies, typical Standby, 3 V, 25 °C, RTC and independent watchdog disabled · p. 143
A pin gives at most
20 mA · absolute max output current sourced by any I/O and control pin · p. 116
Junction to air (LQFP64)
45 K/W · junction-to-ambient thermal resistance · p. 261
Takes asleep
30 nA · Shutdown mode headline; conditions unspecified · p. 1
Takes asleep
29.8 nA · Shutdown typical, VDD = 1.8 V, 25 °C, RTC disabled, backup registers retained · p. 144

What it is and has

26
Device family
Arm® based 32-bit microcontroller · p. 264
Product type
Ultra-low-power · p. 264
Core
Arm® 32-bit Cortex®-M4 CPU with FPU · p. 1
Maximum CPU frequency
80 MHz, Range 1 · p. 24
Flash memory
1 MB · p. 264
Pin count
64 · p. 264
Package
LQFP ECOPACK®2 · p. 264
Temperature grade
Industrial, -40 to 85 °C, 105 °C junction · p. 264
Supply regulator
Integrated LDO · p. 264
RTC
HW calendar, alarms and calibration · p. 1
Digital filters
4 for sigma delta modulator · p. 1
DAC
2 × 12-bit output channels, low-power sample and hold · p. 1
Comparators
2 ultra-low-power · p. 1
USB
OTG 2.0 full-speed, LPM and BCD · p. 1
SAI
2 · p. 1
I2C
3, FM+ at 1 Mbit/s, SMBus/PMBus · p. 1
USART
5, ISO 7816, LIN, IrDA, modem · p. 1
LPUART
1, Stop 2 wake-up · p. 1
Protection
Brown out reset (BOR) · p. 1
Core
Arm Cortex-M4, 32-bit MCU with FPU, 100 DMIPS · p. 1
SRAM
128 KB · p. 1
USB
USB OTG FS · p. 1
Power management
Ultra-low-power with FlexPowerControl · p. 1
RTC
Hardware calendar, alarms and calibration · p. 1
Core
Arm Cortex-M4 32-bit MCU with FPU, 100DMIPS · p. 1
LCD
8× 40 or 4× 44 with step-up converter · p. 1

Around it

2
cap 5 pF to 20 pF
between OSC_IN and GND; CL1; typical range; high-quality ceramic for high-frequency applications; select for the crystal load requirement and include board and pin capacitance. · p. 155
crystal 4 to 48 MHz
between OSC_IN and OSC_OUT; HSE crystal/ceramic resonator; place resonator and load capacitors as close as possible to oscillator pins. · p. 155

Specifications

594
ParameterConditionsAs printedPage
External main supply voltage (including VDD, VDDA, VDDIO2, VDDUSB, VLCD, VBAT) VDDX - VSSmin -0.3 · max 4 V115
Input voltage on TT_xx pins VINTT_xx pinsmax 4 V115
Input voltage on BOOT0 pin VINBOOT0 pinmax 9 V115
Input voltage on any other pins VINAny other pinsmax 4 V115
Variations between different VDDX power pins of the same domain |∆VDDx|max 50 mV116
Variations between all the different ground pins |VSSx-VSS|Includes VREF- pinmax 50 mV116
Total current into sum of all VDD power lines (source) ∑IVDDmax 150 mA116
Total current out of sum of all VSS ground lines (sink) ∑IVSSmax 150 mA116
Maximum current into each VDD power pin (source) IVDD(PIN)max 100 mA116
Maximum current out of each VSS ground pin (sink) IVSS(PIN)max 100 mA116
Output current sunk by any I/O and control pin except FT_f IIO(PIN)Except FT_fmax 20 mA116
Output current sunk by any FT_f pin IIO(PIN)FT_f pinmax 20 mA116
Output current sourced by any I/O and control pin IIO(PIN)max 20 mA116
Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN)max 100 mA116
Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN)max 100 mA116
Total injected current (sum of all I/Os and control pins) ∑|IINJ(PIN)|max 25 mA116
Storage temperature range TSTGmin -65 · max 150 °C117
Maximum junction temperature TJAbsolute maximum ratingmax 150 °C117
Internal AHB clock frequency fHCLKmin 0 · max 80 MHz118
Internal APB1 clock frequency fPCLK1min 0 · max 80 MHz118
Internal APB2 clock frequency fPCLK2min 0 · max 80 MHz118
Standard operating voltage VDDMinimum; see footnote 1min 1.71 V118
Standard operating voltage VDDMaximummax 3.6 V118
Analog supply voltage VDDAADC or COMP used; maximum shared across VDDA conditionsmin 1.62 V118
Analog supply voltage VDDADAC or OPAMP used; maximum shared across VDDA conditionsmin 1.8 V118
Analog supply voltage VDDAVREFBUF used; 3.6 V maximum applies across VDDA conditionsmin 2.4 · max 3.6 V118
Backup operating voltage VBATmin 1.55 · max 3.6 V118
USB supply voltage VDDUSBUSB usedmin 3 · max 3.6 V118
USB supply voltage VDDUSBUSB not usedmin 0 · max 3.6 V118
I/O input voltage VINTT_xx I/O; maximum VDDIOx+0.3 Vmin -0.3 V118
I/O input voltage VINBOOT0min 0 · max 9 V118
I/O input voltage VINAll I/O except BOOT0 and TT_xx; maximum Min(Min(VDD, VDDA, VDDIO2, VDDUSB, VLCD)+3.6 V, 5.5 V)min -0.3 V118
Power dissipation at TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 PDLQFP64, suffix 6, TA = 85 °Cmax 444 mW118
Ambient temperature for the suffix 6 version TAMaximum power dissipationmin -40 · max 85 °C119
Junction temperature range TJSuffix 6 versionmin -40 · max 105 °C119
VDD rise time rate tVDDmin 0 us/V119
VDD fall time rate tVDDmin 10 us/V119
VDDA rise time rate tVDDAmin 0 us/V119
VDDA fall time rate tVDDAmin 10 us/V119
VDDUSB rise time rate tVDDUSBmin 0 us/V119
VDDUSB fall time rate tVDDUSBmin 10 us/V119
VDDIO2 rise time rate tVDDIO2min 0 us/V120
VDDIO2 fall time rate tVDDIO2min 10 us/V120
Reset temporization after BOR0 is detected tRSTTEMPOVDD risingtyp 250 · max 400 us120
Brown-out reset threshold 0 VBOR0Rising edgemin 1.62 · typ 1.66 · max 1.7 V120
Brown-out reset threshold 0 VBOR0Falling edgemin 1.6 · typ 1.64 · max 1.69 V120
Brown-out reset threshold 1 VBOR1Rising edgemin 2.06 · typ 2.1 · max 2.14 V120
Brown-out reset threshold 1 VBOR1Falling edgemin 1.96 · typ 2 · max 2.04 V120
Brown-out reset threshold 2 VBOR2Rising edgemin 2.26 · typ 2.31 · max 2.35 V120
Brown-out reset threshold 2 VBOR2Falling edgemin 2.16 · typ 2.2 · max 2.24 V120
Brown-out reset threshold 3 VBOR3Rising edgemin 2.56 · typ 2.61 · max 2.66 V120
Brown-out reset threshold 3 VBOR3Falling edgemin 2.47 · typ 2.52 · max 2.57 V120
Brown-out reset threshold 4 VBOR4Rising edgemin 2.85 · typ 2.9 · max 2.95 V120
Brown-out reset threshold 4 VBOR4Falling edgemin 2.76 · typ 2.81 · max 2.86 V120
Programmable voltage detector threshold 0 VPVD0Rising edgemin 2.1 · typ 2.15 · max 2.19 V120
Programmable voltage detector threshold 0 VPVD0Falling edgemin 2 · typ 2.05 · max 2.1 V120
PVD threshold 1 VPVD1Rising edgemin 2.26 · typ 2.31 · max 2.36 V120
PVD threshold 1 VPVD1Falling edgemin 2.15 · typ 2.2 · max 2.25 V120
PVD threshold 2 VPVD2Rising edgemin 2.41 · typ 2.46 · max 2.51 V120
PVD threshold 2 VPVD2Falling edgemin 2.31 · typ 2.36 · max 2.41 V120
PVD threshold 3 VPVD3Rising edgemin 2.56 · typ 2.61 · max 2.66 V120
PVD threshold 3 VPVD3Falling edgemin 2.47 · typ 2.52 · max 2.57 V120
PVD threshold 4 VPVD4Rising edgemin 2.69 · typ 2.74 · max 2.79 V120
PVD threshold 4 VPVD4Falling edgemin 2.59 · typ 2.64 · max 2.69 V120
PVD threshold 5 VPVD5Rising edgemin 2.85 · typ 2.91 · max 2.96 V120
PVD threshold 5 VPVD5Falling edgemin 2.75 · typ 2.81 · max 2.86 V120
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 26 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 25 °Ctyp 2.88 · max 3.2 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 26 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 55 °Ctyp 2.93 · max 3.37 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 26 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 85 °Ctyp 3.05 · max 3.51 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 16 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 25 °Ctyp 1.83 · max 2.01 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 16 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 55 °Ctyp 1.87 · max 2.16 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 16 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 85 °Ctyp 1.98 · max 2.3 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 8 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 25 °Ctyp 0.98 · max 1.1 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 8 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 55 °Ctyp 1.02 · max 1.17 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 8 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 85 °Ctyp 1.12 · max 1.31 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 4 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 25 °Ctyp 0.55 · max 0.61 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 4 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 55 °Ctyp 0.59 · max 0.7 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 4 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 85 °Ctyp 0.69 · max 0.89 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 2 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 25 °Ctyp 0.34 · max 0.37 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 2 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 55 °Ctyp 0.37 · max 0.46 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 2 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 85 °Ctyp 0.47 · max 0.64 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 1 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 25 °Ctyp 0.23 · max 0.27 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 1 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 55 °Ctyp 0.26 · max 0.33 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 1 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 85 °Ctyp 0.36 · max 0.5 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 100 kHz; fHCLK = fHSE, bypass mode; all peripherals disable; 25 °Ctyp 0.14 · max 0.17 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 100 kHz; fHCLK = fHSE, bypass mode; all peripherals disable; 55 °Ctyp 0.17 · max 0.21 mA125
Supply current in Run mode IDD_ALL (Run)Range 2; fHCLK = 100 kHz; fHCLK = fHSE, bypass mode; all peripherals disable; 85 °Ctyp 0.27 · max 0.38 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 80 MHz; PLL ON; all peripherals disable; 25 °Ctyp 10.2 · max 11.22 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 80 MHz; PLL ON; all peripherals disable; 55 °Ctyp 10.3 · max 11.8 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 80 MHz; PLL ON; all peripherals disable; 85 °Ctyp 10.5 · max 12.1 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 72 MHz; PLL ON; all peripherals disable; 25 °Ctyp 9.24 · max 10.16 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 72 MHz; PLL ON; all peripherals disable; 55 °Ctyp 9.31 · max 10.7 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 72 MHz; PLL ON; all peripherals disable; 85 °Ctyp 9.47 · max 11 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 64 MHz; PLL ON; all peripherals disable; 25 °Ctyp 8.25 · max 9.08 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 64 MHz; PLL ON; all peripherals disable; 55 °Ctyp 8.32 · max 9.6 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 64 MHz; PLL ON; all peripherals disable; 85 °Ctyp 8.46 · max 9.9 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 48 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 25 °Ctyp 6.28 · max 6.91 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 48 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 55 °Ctyp 6.35 · max 7.3 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 48 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 85 °Ctyp 6.5 · max 7.6 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 32 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 25 °Ctyp 4.24 · max 4.66 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 32 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 55 °Ctyp 4.3 · max 4.97 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 32 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 85 °Ctyp 4.44 · max 5.26 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 24 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 25 °Ctyp 3.21 · max 3.53 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 24 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 55 °Ctyp 3.27 · max 3.76 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 24 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 85 °Ctyp 3.4 · max 4.05 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 16 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 25 °Ctyp 2.19 · max 2.41 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 16 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 55 °Ctyp 2.24 · max 2.66 mA125
Supply current in Run mode IDD_ALL (Run)Range 1; fHCLK = 16 MHz; fHCLK = fHSE, bypass mode; all peripherals disable; 85 °Ctyp 2.36 · max 2.95 mA125
Supply current in Low-power run mode IDD_ALL (LPRun)fHCLK = fMSI = 2 MHz; all peripherals disable; 25 °Ctyp 272 · max 330 uA125
Supply current in Low-power run mode IDD_ALL (LPRun)fHCLK = fMSI = 2 MHz; all peripherals disable; 55 °Ctyp 303 · max 393 uA125
Supply current in Low-power run mode IDD_ALL (LPRun)fHCLK = fMSI = 2 MHz; all peripherals disable; 85 °Ctyp 413 · max 579 uA125
Supply current in Low-power run mode IDD_ALL (LPRun)fHCLK = fMSI = 1 MHz; all peripherals disable; 25 °Ctyp 154 · max 195 uA125
Supply current in Low-power run mode IDD_ALL (LPRun)fHCLK = fMSI = 1 MHz; all peripherals disable; 55 °Ctyp 184 · max 265 uA125
Supply current in Low-power run mode IDD_ALL (LPRun)fHCLK = fMSI = 1 MHz; all peripherals disable; 85 °Ctyp 293 · max 457 uA125
Supply current in Low-power run mode IDD_ALL (LPRun)fHCLK = fMSI = 400 kHz; all peripherals disable; 25 °Ctyp 78 · max 110 uA125
Supply current in Low-power run mode IDD_ALL (LPRun)fHCLK = fMSI = 400 kHz; all peripherals disable; 55 °Ctyp 108 · max 180 uA125
Supply current in Low-power run mode IDD_ALL (LPRun)fHCLK = fMSI = 400 kHz; all peripherals disable; 85 °Ctyp 217 · max 380 uA125
Supply current in Low-power run mode IDD_ALL (LPRun)fHCLK = fMSI = 100 kHz; all peripherals disable; 25 °Ctyp 42 · max 75 uA125
Supply current in Low-power run mode IDD_ALL (LPRun)fHCLK = fMSI = 100 kHz; all peripherals disable; 55 °Ctyp 73 · max 138 uA125
Supply current in Low-power run mode IDD_ALL (LPRun)fHCLK = fMSI = 100 kHz; all peripherals disable; 85 °Ctyp 182 · max 331 uA125
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 1.8 V; 25 °Ctyp 114 · max 176 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 1.8 V; 55 °Ctyp 355 · max 888 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 1.8 V; 85 °Ctyp 1540 · max 3850 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 2.4 V; 25 °Ctyp 138 · max 223 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 2.4 V; 55 °Ctyp 407 · max 1018 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 2.4 V; 85 °Ctyp 1795 · max 4488 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 3 V; 25 °Ctyp 150 · max 263 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 3 V; 55 °Ctyp 486 · max 1215 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 3 V; 85 °Ctyp 2074 · max 5185 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 3.6 V; 25 °Ctyp 198 · max 383 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 3.6 V; 55 °Ctyp 618 · max 1545 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 3.6 V; 85 °Ctyp 2608 · max 6520 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)With independent watchdog; VDD = 1.8 V; 25 °Ctyp 317 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)With independent watchdog; VDD = 2.4 V; 25 °Ctyp 391 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)With independent watchdog; VDD = 3 V; 25 °Ctyp 438 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)With independent watchdog; VDD = 3.6 V; 25 °Ctyp 566 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 1.8 V; 25 °Ctyp 377 · max 491 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 1.8 V; 55 °Ctyp 621 · max 1207 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 1.8 V; 85 °Ctyp 1873 · max 4250 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 2.4 V; 25 °Ctyp 464 · max 614 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 2.4 V; 55 °Ctyp 756 · max 1436 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 2.4 V; 85 °Ctyp 2210 · max 4986 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3 V; 25 °Ctyp 572 · max 770 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3 V; 55 °Ctyp 913 · max 1727 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3 V; 85 °Ctyp 2599 · max 5815 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3.6 V; 25 °Ctyp 722 · max 1012 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3.6 V; 55 °Ctyp 1144 · max 2176 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3.6 V; 85 °Ctyp 3253 · max 7294 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, with independent watchdog; VDD = 1.8 V; 25 °Ctyp 456 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, with independent watchdog; VDD = 2.4 V; 25 °Ctyp 557 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, with independent watchdog; VDD = 3 V; 25 °Ctyp 663 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, with independent watchdog; VDD = 3.6 V; 25 °Ctyp 885 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 2.4 V; 25 °Ctyp 396 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 2.4 V; 55 °Ctyp 671 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 2.4 V; 85 °Ctyp 2108 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 3 V; 55 °Ctyp 853 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 3 V; 85 °Ctyp 2531 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 3.6 V; 25 °Ctyp 710 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 3.6 V; 55 °Ctyp 1111 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 3.6 V; 85 °Ctyp 3115 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 25 °Ctyp 416 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 55 °Ctyp 640 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 85 °Ctyp 1862 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 25 °Ctyp 514 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 55 °Ctyp 796 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 85 °Ctyp 2193 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 25 °Ctyp 652 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 55 °Ctyp 961 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 85 °Ctyp 2589 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 25 °Ctyp 821 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 55 °Ctyp 1226 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 85 °Ctyp 3235 nA143
Thermal resistance junction-ambient ΘJALQFP64 - 10 × 10 mm / 0.5 mm pitchtyp 45 °C/W261
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = fHSE = 26 MHz; bypass mode; all peripherals disabledtyp 2.88 · max 3.2 mA125
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = fHSE = 16 MHz; bypass mode; all peripherals disabledtyp 1.83 · max 2.01 mA125
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = fHSE = 8 MHz; bypass mode; all peripherals disabledtyp 0.98 · max 1.1 mA125
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = fHSE = 4 MHz; bypass mode; all peripherals disabledtyp 0.55 · max 0.61 mA125
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = fHSE = 2 MHz; bypass mode; all peripherals disabledtyp 0.34 · max 0.37 mA125
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = fHSE = 1 MHz; bypass mode; all peripherals disabledtyp 0.23 · max 0.27 mA125
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = fHSE = 100 kHz; bypass mode; all peripherals disabledtyp 0.14 · max 0.17 mA125
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; PLL ON; all peripherals disabledtyp 10.2 · max 11.22 mA125
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 72 MHz; PLL ON; all peripherals disabledtyp 9.24 · max 10.16 mA125
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 64 MHz; PLL ON; all peripherals disabledtyp 8.25 · max 9.08 mA125
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = fHSE = 48 MHz; bypass mode; all peripherals disabledtyp 6.28 · max 6.91 mA125
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = fHSE = 32 MHz; bypass mode; all peripherals disabledtyp 4.24 · max 4.66 mA125
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = fHSE = 24 MHz; bypass mode; all peripherals disabledtyp 3.21 · max 3.53 mA125
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = fHSE = 16 MHz; bypass mode; all peripherals disabledtyp 2.19 · max 2.41 mA125
Supply current in Low-power run mode IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; all peripherals disabledtyp 272 · max 330 uA125
Supply current in Low-power run mode IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 1 MHz; all peripherals disabledtyp 154 · max 195 uA125
Supply current in Low-power run mode IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 400 kHz; all peripherals disabledtyp 78 · max 110 uA125
Supply current in Low-power run mode IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 100 kHz; all peripherals disabledtyp 42 · max 75 uA125
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = fHSE = 26 MHz; bypass mode; all peripherals disabledtyp 2.88 · max 3.18 mA129
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = fHSE = 16 MHz; bypass mode; all peripherals disabledtyp 1.83 · max 2.01 mA129
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = fHSE = 8 MHz; bypass mode; all peripherals disabledtyp 0.97 · max 1.07 mA129
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = fHSE = 4 MHz; bypass mode; all peripherals disabledtyp 0.54 · max 0.59 mA129
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = fHSE = 2 MHz; bypass mode; all peripherals disabledtyp 0.33 · max 0.37 mA129
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = fHSE = 1 MHz; bypass mode; all peripherals disabledtyp 0.22 · max 0.25 mA129
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = fHSE = 100 kHz; bypass mode; all peripherals disabledtyp 0.12 · max 0.15 mA129
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; PLL ON; all peripherals disabledtyp 10.2 · max 11.22 mA129
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 72 MHz; PLL ON; all peripherals disabledtyp 9.25 · max 10.18 mA129
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 64 MHz; PLL ON; all peripherals disabledtyp 8.25 · max 9.08 mA129
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = fHSE = 48 MHz; bypass mode; all peripherals disabledtyp 6.26 · max 6.89 mA129
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = fHSE = 32 MHz; bypass mode; all peripherals disabledtyp 4.22 · max 4.64 mA129
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = fHSE = 24 MHz; bypass mode; all peripherals disabledtyp 3.2 · max 3.52 mA129
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = fHSE = 16 MHz; bypass mode; all peripherals disabledtyp 2.18 · max 2.4 mA129
Supply current in low-power run mode IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; all peripherals disabled; FLASH in power-downtyp 242 · max 300 uA129
Supply current in low-power run mode IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 1 MHz; all peripherals disabled; FLASH in power-downtyp 130 · max 180 uA129
Supply current in low-power run mode IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 400 kHz; all peripherals disabled; FLASH in power-downtyp 61 · max 95 uA129
Supply current in low-power run mode IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 100 kHz; all peripherals disabled; FLASH in power-downtyp 26 · max 55 uA129
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Reduced code; all peripherals disabledtyp 2.9 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Reduced code; normalized per MHztyp 111 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Coremark; all peripherals disabledtyp 3.1 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Coremark; normalized per MHztyp 118 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Dhrystone 2.1; all peripherals disabledtyp 3.1 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Dhrystone 2.1; normalized per MHztyp 119 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Fibonacci; all peripherals disabledtyp 2.9 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Fibonacci; normalized per MHztyp 112 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; While; all peripherals disabledtyp 2.8 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; While; normalized per MHztyp 108 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Reduced code; all peripherals disabledtyp 10.2 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Reduced code; normalized per MHztyp 127 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Coremark; all peripherals disabledtyp 10.9 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Coremark; normalized per MHztyp 136 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Dhrystone 2.1; all peripherals disabledtyp 11 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Dhrystone 2.1; normalized per MHztyp 137 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Fibonacci; all peripherals disabledtyp 10.5 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Fibonacci; normalized per MHztyp 131 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; While; all peripherals disabledtyp 9.9 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; While; normalized per MHztyp 124 uA/MHz131
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Reduced code; all peripherals disabledtyp 272 uA131
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Reduced code; normalized per MHztyp 136 uA/MHz131
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Coremark; all peripherals disabledtyp 291 uA131
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Coremark; normalized per MHztyp 145 uA/MHz131
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Dhrystone 2.1; all peripherals disabledtyp 302 uA131
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Dhrystone 2.1; normalized per MHztyp 151 uA/MHz131
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Fibonacci; all peripherals disabledtyp 269 uA131
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Fibonacci; normalized per MHztyp 135 uA/MHz131
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; While; all peripherals disabledtyp 269 uA131
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; While; normalized per MHztyp 135 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Reduced code; all peripherals disabled; calculated SMPS input currenttyp 1.25 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Reduced code; normalized per MHz; calculated SMPS input currenttyp 48 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Coremark; all peripherals disabled; calculated SMPS input currenttyp 1.34 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Coremark; normalized per MHz; calculated SMPS input currenttyp 51 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Dhrystone 2.1; all peripherals disabled; calculated SMPS input currenttyp 1.34 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Dhrystone 2.1; normalized per MHz; calculated SMPS input currenttyp 51 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Fibonacci; all peripherals disabled; calculated SMPS input currenttyp 1.25 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Fibonacci; normalized per MHz; calculated SMPS input currenttyp 48 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; While; all peripherals disabled; calculated SMPS input currenttyp 1.21 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; While; normalized per MHz; calculated SMPS input currenttyp 46 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Reduced code; all peripherals disabled; calculated SMPS input currenttyp 3.67 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Reduced code; normalized per MHz; calculated SMPS input currenttyp 46 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Coremark; all peripherals disabled; calculated SMPS input currenttyp 3.92 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Coremark; normalized per MHz; calculated SMPS input currenttyp 49 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Dhrystone 2.1; all peripherals disabled; calculated SMPS input currenttyp 3.95 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Dhrystone 2.1; normalized per MHz; calculated SMPS input currenttyp 49 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Fibonacci; all peripherals disabled; calculated SMPS input currenttyp 3.77 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Fibonacci; normalized per MHz; calculated SMPS input currenttyp 47 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; While; all peripherals disabled; calculated SMPS input currenttyp 3.56 mA131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; While; normalized per MHz; calculated SMPS input currenttyp 44 uA/MHz131
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Reduced code; all peripherals disabled; calculated SMPS input currenttyp 1.14 mA132
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Reduced code; normalized per MHz; calculated SMPS input currenttyp 44 uA/MHz132
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Coremark; all peripherals disabled; calculated SMPS input currenttyp 1.22 mA132
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Coremark; normalized per MHz; calculated SMPS input currenttyp 47 uA/MHz132
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Dhrystone 2.1; all peripherals disabled; calculated SMPS input currenttyp 1.22 mA132
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Dhrystone 2.1; normalized per MHz; calculated SMPS input currenttyp 47 uA/MHz132
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Fibonacci; all peripherals disabled; calculated SMPS input currenttyp 1.14 mA132
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Fibonacci; normalized per MHz; calculated SMPS input currenttyp 44 uA/MHz132
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; While; all peripherals disabled; calculated SMPS input currenttyp 1.1 mA132
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; While; normalized per MHz; calculated SMPS input currenttyp 42 uA/MHz132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Reduced code; all peripherals disabledtyp 3.1 mA132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Reduced code; normalized per MHztyp 119 uA/MHz132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Coremark; all peripherals disabledtyp 2.9 mA132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Coremark; normalized per MHztyp 111 uA/MHz132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Dhrystone 2.1; all peripherals disabledtyp 2.8 mA132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Dhrystone 2.1; normalized per MHztyp 111 uA/MHz132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Fibonacci; all peripherals disabledtyp 2.7 mA132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Fibonacci; normalized per MHztyp 104 uA/MHz132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; While; all peripherals disabledtyp 2.6 mA132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; While; normalized per MHztyp 100 uA/MHz132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Reduced code; all peripherals disabledtyp 10 mA132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Reduced code; normalized per MHztyp 125 uA/MHz132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Coremark; all peripherals disabledtyp 9.4 mA132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Coremark; normalized per MHztyp 117 uA/MHz132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Dhrystone 2.1; all peripherals disabledtyp 9.1 mA132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Dhrystone 2.1; normalized per MHztyp 114 uA/MHz132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Fibonacci; all peripherals disabledtyp 9 mA132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Fibonacci; normalized per MHztyp 112 uA/MHz132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; While; all peripherals disabledtyp 9.3 mA132
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; While; normalized per MHztyp 116 uA/MHz132
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Reduced code; all peripherals disabledtyp 358 uA132
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Reduced code; normalized per MHztyp 179 uA/MHz132
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Coremark; all peripherals disabledtyp 392 uA132
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Coremark; normalized per MHztyp 196 uA/MHz132
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Dhrystone 2.1; all peripherals disabledtyp 390 uA132
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Dhrystone 2.1; normalized per MHztyp 195 uA/MHz132
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Fibonacci; all peripherals disabledtyp 385 uA132
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Fibonacci; normalized per MHztyp 192 uA/MHz132
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; While; all peripherals disabledtyp 385 uA132
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; While; normalized per MHztyp 192 uA/MHz132
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Reduced code; calculated SMPS input currenttyp 1.34 mA133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Reduced code; normalized per MHz; calculated SMPS input currenttyp 51 uA/MHz133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Coremark; calculated SMPS input currenttyp 1.25 mA133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Coremark; normalized per MHz; calculated SMPS input currenttyp 48 uA/MHz133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Dhrystone 2.1; calculated SMPS input currenttyp 1.21 mA133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Dhrystone 2.1; normalized per MHz; calculated SMPS input currenttyp 46 uA/MHz133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Fibonacci; calculated SMPS input currenttyp 1.16 mA133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Fibonacci; normalized per MHz; calculated SMPS input currenttyp 45 uA/MHz133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; While; calculated SMPS input currenttyp 1.12 mA133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; While; normalized per MHz; calculated SMPS input currenttyp 43 uA/MHz133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Reduced code; calculated SMPS input currenttyp 3.59 mA133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Reduced code; normalized per MHz; calculated SMPS input currenttyp 45 uA/MHz133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Coremark; calculated SMPS input currenttyp 3.38 mA133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Coremark; normalized per MHz; calculated SMPS input currenttyp 42 uA/MHz133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Dhrystone 2.1; calculated SMPS input currenttyp 3.27 mA133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Dhrystone 2.1; normalized per MHz; calculated SMPS input currenttyp 41 uA/MHz133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Fibonacci; calculated SMPS input currenttyp 3.24 mA133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Fibonacci; normalized per MHz; calculated SMPS input currenttyp 40 uA/MHz133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; While; calculated SMPS input currenttyp 3.34 mA133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; While; normalized per MHz; calculated SMPS input currenttyp 42 uA/MHz133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Reduced code; calculated SMPS input currenttyp 1.22 mA133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Reduced code; normalized per MHz; calculated SMPS input currenttyp 47 uA/MHz133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Coremark; calculated SMPS input currenttyp 1.14 mA133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Coremark; normalized per MHz; calculated SMPS input currenttyp 44 uA/MHz133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Dhrystone 2.1; calculated SMPS input currenttyp 1.1 mA133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Dhrystone 2.1; normalized per MHz; calculated SMPS input currenttyp 42 uA/MHz133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Fibonacci; calculated SMPS input currenttyp 1.06 mA133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Fibonacci; normalized per MHz; calculated SMPS input currenttyp 41 uA/MHz133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; While; calculated SMPS input currenttyp 1.02 mA133
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; While; normalized per MHz; calculated SMPS input currenttyp 39 uA/MHz133
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Dhrystone 2.1; all peripherals disabledtyp 2.9 mA134
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Dhrystone 2.1; normalized per MHztyp 111 uA/MHz134
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Fibonacci; all peripherals disabledtyp 2.6 mA134
Supply current in Run mode IDD_ALL (Run)25 °C; Range 2; fHCLK = 26 MHz; Fibonacci; normalized per MHztyp 100 uA/MHz134
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Reduced code; all peripherals disabledtyp 10.2 mA134
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Reduced code; normalized per MHztyp 127 uA/MHz134
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Coremark; all peripherals disabledtyp 10.4 mA134
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Coremark; normalized per MHztyp 130 uA/MHz134
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Dhrystone 2.1; all peripherals disabledtyp 10.3 mA134
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Dhrystone 2.1; normalized per MHztyp 129 uA/MHz134
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Fibonacci; all peripherals disabledtyp 9.6 mA134
Supply current in Run mode IDD_ALL (Run)25 °C; Range 1; fHCLK = 80 MHz; Fibonacci; normalized per MHztyp 120 uA/MHz134
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Reduced code; all peripherals disabledtyp 242 uA134
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Reduced code; normalized per MHztyp 121 uA/MHz134
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Coremark; all peripherals disabledtyp 242 uA134
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Coremark; normalized per MHztyp 121 uA/MHz134
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Dhrystone 2.1; all peripherals disabledtyp 242 uA134
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Dhrystone 2.1; normalized per MHztyp 121 uA/MHz134
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Fibonacci; all peripherals disabledtyp 225 uA134
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; Fibonacci; normalized per MHztyp 112 uA/MHz134
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; While; all peripherals disabledtyp 242 uA134
Supply current in Low-power run IDD_ALL (LPRun)25 °C; fHCLK = fMSI = 2 MHz; While; normalized per MHztyp 121 uA/MHz134
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Reduced code; calculated SMPS input currenttyp 1.25 mA134
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Dhrystone 2.1; calculated SMPS input currenttyp 1.25 mA134
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Dhrystone 2.1; normalized per MHz; calculated SMPS input currenttyp 48 uA/MHz134
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Fibonacci; calculated SMPS input currenttyp 1.12 mA134
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; Fibonacci; normalized per MHz; calculated SMPS input currenttyp 43 uA/MHz134
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; While; calculated SMPS input currenttyp 1.12 mA134
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 26 MHz; While; normalized per MHz; calculated SMPS input currenttyp 43 uA/MHz134
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Reduced code; calculated SMPS input currenttyp 3.67 mA134
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Reduced code; normalized per MHz; calculated SMPS input currenttyp 46 uA/MHz134
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Coremark; calculated SMPS input currenttyp 3.74 mA134
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Coremark; normalized per MHz; calculated SMPS input currenttyp 47 uA/MHz134
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Dhrystone 2.1; calculated SMPS input currenttyp 3.7 mA134
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Dhrystone 2.1; normalized per MHz; calculated SMPS input currenttyp 46 uA/MHz134
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Fibonacci; calculated SMPS input currenttyp 3.45 mA134
Supply current in Run mode IDD_ALL (Run)25 °C; fHCLK = 80 MHz; Fibonacci; normalized per MHz; calculated SMPS input currenttyp 43 uA/MHz134
Supply current in sleep mode, IDD_ALL(Sleep)25 °C; fHCLK = 80 MHz; PLL ON; all peripherals disabled; calculated SMPS input currenttyp 1.06 mA137
Supply current in sleep mode, IDD_ALL(Sleep)25 °C; fHCLK = 72 MHz; PLL ON; all peripherals disabled; calculated SMPS input currenttyp 0.97 mA137
Supply current in sleep mode, IDD_ALL(Sleep)25 °C; fHCLK = 64 MHz; PLL ON; all peripherals disabled; calculated SMPS input currenttyp 0.87 mA137
Supply current in sleep mode, IDD_ALL(Sleep)25 °C; fHCLK = fHSE = 48 MHz; bypass mode; all peripherals disabled; calculated SMPS input currenttyp 0.68 mA137
Supply current in sleep mode, IDD_ALL(Sleep)25 °C; fHCLK = fHSE = 32 MHz; bypass mode; all peripherals disabled; calculated SMPS input currenttyp 0.47 mA137
Supply current in sleep mode, IDD_ALL(Sleep)25 °C; fHCLK = fHSE = 24 MHz; bypass mode; all peripherals disabled; calculated SMPS input currenttyp 0.36 mA137
Supply current in sleep mode, IDD_ALL(Sleep)25 °C; fHCLK = fHSE = 16 MHz; bypass mode; all peripherals disabled; calculated SMPS input currenttyp 0.26 mA137
Supply current in sleep mode, IDD_ALL(Sleep)25 °C; fHCLK = fHSE = 8 MHz; bypass mode; all peripherals disabled; calculated SMPS input currenttyp 0.16 mA137
Supply current in sleep mode, IDD_ALL(Sleep)25 °C; fHCLK = fHSE = 4 MHz; bypass mode; all peripherals disabled; calculated SMPS input currenttyp 0.1 mA137
Supply current in sleep mode, IDD_ALL(Sleep)25 °C; fHCLK = fHSE = 2 MHz; bypass mode; all peripherals disabled; calculated SMPS input currenttyp 0.08 mA137
Supply current in sleep mode, IDD_ALL(Sleep)25 °C; fHCLK = fHSE = 1 MHz; bypass mode; all peripherals disabled; calculated SMPS input currenttyp 0.06 mA137
Supply current in sleep mode, IDD_ALL(Sleep)25 °C; fHCLK = fHSE = 100 kHz; bypass mode; all peripherals disabled; calculated SMPS input currenttyp 0.05 mA137
Supply current in low-power sleep mode IDD_ALL (LPSleep)25 °C; fHCLK = fMSI = 2 MHz; all peripherals disabledtyp 81 · max 115 uA137
Supply current in low-power sleep mode IDD_ALL (LPSleep)25 °C; fHCLK = fMSI = 1 MHz; all peripherals disabledtyp 50 · max 80 uA137
Supply current in low-power sleep mode IDD_ALL (LPSleep)25 °C; fHCLK = fMSI = 400 kHz; all peripherals disabledtyp 28 · max 60 uA137
Supply current in low-power sleep mode IDD_ALL (LPSleep)25 °C; fHCLK = fMSI = 100 kHz; all peripherals disabledtyp 18 · max 50 uA137
Supply current in Stop 2 mode, RTC disabled IDD_ALL (Stop 2)25 °C; VDD = 1.8 V; LCD disabledtyp 1.14 · max 2.7 uA138
Supply current in Stop 2 mode, RTC disabled IDD_ALL (Stop 2)25 °C; VDD = 2.4 V; LCD disabledtyp 1.15 · max 2.7 uA138
Supply current in Stop 2 mode, RTC disabled IDD_ALL (Stop 2)25 °C; VDD = 3 V; LCD disabledtyp 1.18 · max 2.8 uA138
Supply current in Stop 2 mode, RTC disabled IDD_ALL (Stop 2)25 °C; VDD = 3.6 V; LCD disabledtyp 1.26 · max 3 uA138
Supply current in Stop 2 mode, RTC disabled IDD_ALL (Stop 2)25 °C; VDD = 1.8 V; LCD enabled, clocked by LSItyp 1.43 · max 3.2 uA138
Supply current in Stop 2 mode, RTC disabled IDD_ALL (Stop 2)25 °C; VDD = 2.4 V; LCD enabled, clocked by LSItyp 1.49 · max 3.2 uA138
Supply current in Stop 2 mode, RTC disabled IDD_ALL (Stop 2)25 °C; VDD = 3 V; LCD enabled, clocked by LSItyp 1.54 · max 3.3 uA138
Supply current in Stop 2 mode, RTC disabled IDD_ALL (Stop 2)25 °C; VDD = 3.6 V; LCD enabled, clocked by LSItyp 1.75 · max 3.5 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 1.8 V; RTC clocked by LSI; LCD disabledtyp 1.42 · max 3.1 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 2.4 V; RTC clocked by LSI; LCD disabledtyp 1.5 · max 3.2 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 3 V; RTC clocked by LSI; LCD disabledtyp 1.64 · max 3.4 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 3.6 V; RTC clocked by LSI; LCD disabledtyp 1.79 · max 3.6 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 1.8 V; RTC clocked by LSI; LCD enabledtyp 1.53 · max 3.3 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 2.4 V; RTC clocked by LSI; LCD enabledtyp 1.62 · max 3.4 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 3 V; RTC clocked by LSI; LCD enabledtyp 1.69 · max 3.5 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 3.6 V; RTC clocked by LSI; LCD enabledtyp 1.86 · max 3.7 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 1.8 V; RTC clocked by LSE bypassed at 32768 Hz; LCD disabledtyp 1.5 · max 3.2 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 2.4 V; RTC clocked by LSE bypassed at 32768 Hz; LCD disabledtyp 1.63 · max 3.4 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 3 V; RTC clocked by LSE bypassed at 32768 Hz; LCD disabledtyp 1.79 · max 3.6 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 3.6 V; RTC clocked by LSE bypassed at 32768 Hz; LCD disabledtyp 2.04 · max 3.9 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 1.8 V; RTC clocked by LSE quartz in low drive mode; LCD disabledtyp 1.43 · max 3.2 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 2.4 V; RTC clocked by LSE quartz in low drive mode; LCD disabledtyp 1.54 · max 3.3 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 3 V; RTC clocked by LSE quartz in low drive mode; LCD disabledtyp 1.67 · max 3.4 uA138
Supply current in Stop 2 mode, RTC enabled IDD_ALL (Stop 2 with RTC)25 °C; VDD = 3.6 V; RTC clocked by LSE quartz in low drive mode; LCD disabledtyp 1.87 · max 3.7 uA138
Supply current in Stop 1 mode, RTC disabled IDD_ALL (Stop 1)25 °C; VDD = 1.8 V; LCD disabledtyp 6.59 · max 16 uA140
Supply current in Stop 1 mode, RTC disabled IDD_ALL (Stop 1)25 °C; VDD = 2.4 V; LCD disabledtyp 6.65 · max 17 uA140
Supply current in Stop 1 mode, RTC disabled IDD_ALL (Stop 1)25 °C; VDD = 3 V; LCD disabledtyp 6.65 · max 17 uA140
Supply current in Stop 1 mode, RTC disabled IDD_ALL (Stop 1)25 °C; VDD = 1.8 V; LCD enabled, clocked by LSItyp 7 · max 18 uA140
Supply current in Stop 1 mode, RTC disabled IDD_ALL (Stop 1)25 °C; VDD = 2.4 V; LCD enabled, clocked by LSItyp 7.14 · max 18 uA140
Supply current in Stop 1 mode, RTC disabled IDD_ALL (Stop 1)25 °C; VDD = 3 V; LCD enabled, clocked by LSItyp 7.24 · max 18 uA140
Supply current in Stop 1 mode, RTC disabled IDD_ALL (Stop 1)25 °C; VDD = 3.6 V; LCD enabled, clocked by LSItyp 7.36 · max 18 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 1.8 V; RTC clocked by LSI; LCD disabledtyp 6.88 · max 17 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 2.4 V; RTC clocked by LSI; LCD disabledtyp 7.02 · max 18 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 3 V; RTC clocked by LSI; LCD disabledtyp 7.12 · max 18 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 3.6 V; RTC clocked by LSI; LCD disabledtyp 7.25 · max 18 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 1.8 V; RTC clocked by LSI; LCD enabledtyp 7.01 · max 18 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 2.4 V; RTC clocked by LSI; LCD enabledtyp 7.14 · max 18 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 3 V; RTC clocked by LSI; LCD enabledtyp 7.31 · max 18 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 3.6 V; RTC clocked by LSI; LCD enabledtyp 7.41 · max 19 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 1.8 V; RTC clocked by LSE bypassed at 32768 Hz; LCD disabledtyp 6.91 · max 17 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 2.4 V; RTC clocked by LSE bypassed at 32768 Hz; LCD disabledtyp 7.04 · max 18 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 3 V; RTC clocked by LSE bypassed at 32768 Hz; LCD disabledtyp 7.19 · max 18 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 3.6 V; RTC clocked by LSE bypassed at 32768 Hz; LCD disabledtyp 7.97 · max 20 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 1.8 V; RTC clocked by LSE quartz in low drive mode; LCD disabledtyp 6.85 · max 17 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 2.4 V; RTC clocked by LSE quartz in low drive mode; LCD disabledtyp 6.94 · max 17 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 3 V; RTC clocked by LSE quartz in low drive mode; LCD disabledtyp 7.1 · max 18 uA140
Supply current in stop 1 mode, RTC enabled IDD_ALL (Stop 1 with RTC)25 °C; VDD = 3.6 V; RTC clocked by LSE quartz in low drive mode; LCD disabledtyp 7.34 · max 18 uA140
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 1.8 V; 105 °Ctyp 4146 · max 10365 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 1.8 V; 125 °Ctyp 10735 · max 26838 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 2.4 V; 105 °Ctyp 4828 · max 12070 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 2.4 V; 125 °Ctyp 12451 · max 31128 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 3 V; 105 °Ctyp 5589 · max 13973 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 3 V; 125 °Ctyp 14291 · max 35728 nA143
Supply current in Standby mode (backup registers retained), RTC disabled IDD_ALL (Standby)No independent watchdog; VDD = 3.6 V; 125 °Ctyp 17499 · max 43748 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 1.8 V; 105 °Ctyp 4564 · max 10867 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 1.8 V; 125 °Ctyp 11318 · max 27537 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 2.4 V; 105 °Ctyp 5348 · max 12694 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 2.4 V; 125 °Ctyp 13166 · max 31986 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3 V; 105 °Ctyp 6219 · max 14729 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3 V; 125 °Ctyp 15197 · max 36815 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3.6 V; 105 °Ctyp 7724 · max 18275 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, no independent watchdog; VDD = 3.6 V; 125 °Ctyp 18696 · max 45184 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSI, with independent watchdog; VDD = 3.6 V; 25 °Ctyp 885 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 1.8 V; 25 °Ctyp 289 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 1.8 V; 55 °Ctyp 527 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 1.8 V; 85 °Ctyp 1747 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 1.8 V; 105 °Ctyp 4402 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 1.8 V; 125 °Ctyp 11009 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 2.4 V; 105 °Ctyp 5202 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 2.4 V; 125 °Ctyp 12869 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 3 V; 25 °Ctyp 528 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 3 V; 105 °Ctyp 6095 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 3 V; 125 °Ctyp 14915 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 3.6 V; 105 °Ctyp 7470 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE bypassed at 32768Hz; VDD = 3.6 V; 125 °Ctyp 18221 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 105 °Ctyp 4479 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 1.8 V; 125 °Ctyp 11908 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 105 °Ctyp 5236 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 2.4 V; 125 °Ctyp 13689 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 105 °Ctyp 6103 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3 V; 125 °Ctyp 15598 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 105 °Ctyp 7551 nA143
Supply current in Standby mode (backup registers retained), RTC enabled IDD_ALL (Standby with RTC)RTC clocked by LSE quartz in low drive mode; VDD = 3.6 V; 125 °Ctyp 17947 nA143
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 1.8 V; 25 °Ctyp 235 · max 588 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 1.8 V; 55 °Ctyp 641 · max 1603 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 1.8 V; 85 °Ctyp 2293 · max 5733 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 1.8 V; 105 °Ctyp 5192 · max 12980 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 1.8 V; 125 °Ctyp 11213 · max 28033 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 2.4 V; 25 °Ctyp 237 · max 593 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 2.4 V; 55 °Ctyp 645 · max 1613 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 2.4 V; 85 °Ctyp 2303 · max 5758 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 2.4 V; 105 °Ctyp 5213 · max 13033 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 2.4 V; 125 °Ctyp 11246 · max 28115 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 3 V; 25 °Ctyp 236 · max 593 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 3 V; 55 °Ctyp 647 · max 1618 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 3 V; 85 °Ctyp 2306 · max 5765 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 3 V; 105 °Ctyp 5221 · max 13053 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 3 V; 125 °Ctyp 11333 · max 28333 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 3.6 V; 25 °Ctyp 235 · max 595 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 3.6 V; 55 °Ctyp 646 · max 1620 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 3.6 V; 85 °Ctyp 2308 · max 5770 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 3.6 V; 105 °Ctyp 5200 · max 13075 nA144
Supply current to be added in Standby mode when SRAM2 is retained IDD_ALL (SRAM2)VDD = 3.6 V; 125 °Ctyp 11327 · max 28350 nA144
Supply current during wakeup from Standby mode IDD_ALL (wakeup from Standby)VDD = 3 V; 25 °C; wakeup clock MSI = 4 MHz; code execution from Flash; average during typical wakeuptyp 1.7 mA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 1.8 V; 25 °Ctyp 29.8 · max 75 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 1.8 V; 55 °Ctyp 194 · max 485 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 1.8 V; 85 °Ctyp 1110 · max 2775 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 1.8 V; 105 °Ctyp 3250 · max 8125 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 1.8 V; 125 °Ctyp 9093 · max 22733 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 2.4 V; 25 °Ctyp 44.3 · max 111 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 2.4 V; 55 °Ctyp 237 · max 593 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 2.4 V; 85 °Ctyp 1310 · max 3275 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 2.4 V; 105 °Ctyp 3798 · max 9495 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 2.4 V; 125 °Ctyp 10473 · max 26183 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 3 V; 25 °Ctyp 64.1 · max 160 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 3 V; 55 °Ctyp 293 · max 733 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 3 V; 85 °Ctyp 1554 · max 3885 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 3 V; 105 °Ctyp 4461 · max 11153 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 3 V; 125 °Ctyp 12082 · max 30205 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 3.6 V; 25 °Ctyp 112 · max 280 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 3.6 V; 55 °Ctyp 420 · max 1050 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 3.6 V; 85 °Ctyp 2041 · max 5103 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 3.6 V; 105 °Ctyp 5689 · max 14223 nA144
Supply current in Shutdown mode (backup registers retained) RTC disabled IDD_ALL (Shutdown)VDD = 3.6 V; 125 °Ctyp 15186 · max 37965 nA144
Wakeup time from Sleep mode to Run mode tWUSLEEP-typ 6 · max 6 Nb of CPU cycles151
Wakeup time from Low-power sleep mode to Low-power run mode tWULPSLEEPWakeup in Flash with Flash in power-down during low-power sleep mode (SLEEP_PD=1 in FLASH_ACR) and with clock MSI = 2 MHztyp 6 · max 9.3 Nb of CPU cycles151
Wake up time from Stop 0 mode to Run mode in Flash tWUSTOP0Range 1; wakeup clock MSI = 48 MHztyp 5.6 · max 10.9 us151
Wake up time from Stop 0 mode to Run mode in Flash tWUSTOP0Range 1; wakeup clock HSI16 = 16 MHztyp 4.7 · max 10.4 us151
Wake up time from Stop 0 mode to Run mode in Flash tWUSTOP0Range 2; wakeup clock MSI = 24 MHztyp 5.7 · max 11.1 us151
Wake up time from Stop 0 mode to Run mode in Flash tWUSTOP0Range 2; wakeup clock HSI16 = 16 MHztyp 4.5 · max 10.5 us151
Wake up time from Stop 0 mode to Run mode in Flash tWUSTOP0Range 2; wakeup clock MSI = 4 MHztyp 6.6 · max 14.2 us151
Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0Range 1; wakeup clock MSI = 48 MHztyp 0.7 · max 2.05 us151
Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0Range 1; wakeup clock HSI16 = 16 MHztyp 1.7 · max 2.8 us151
Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0Range 2; wakeup clock MSI = 24 MHztyp 0.8 · max 2.72 us151
Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0Range 2; wakeup clock HSI16 = 16 MHztyp 1.7 · max 2.8 us151
Wake up time from Stop 0 mode to Run mode in SRAM1 tWUSTOP0Range 2; wakeup clock MSI = 4 MHztyp 2.4 · max 11.32 us151
Wake up time from Stop 1 mode to Run mode in Flash tWUSTOP1Range 1; wakeup clock MSI = 48 MHztyp 6.2 · max 10.2 us152
Wake up time from Stop 1 mode to Run mode in Flash tWUSTOP1Range 1; wakeup clock HSI16 = 16 MHztyp 6.3 · max 8.99 us152
Wake up time from Stop 1 mode to Run mode in Flash tWUSTOP1Range 2; wakeup clock MSI = 24 MHztyp 6.3 · max 10.46 us152
Wake up time from Stop 1 mode to Run mode in Flash tWUSTOP1Range 2; wakeup clock HSI16 = 16 MHztyp 6.3 · max 8.87 us152
Wake up time from Stop 1 mode to Run mode in Flash tWUSTOP1Range 2; wakeup clock MSI = 4 MHztyp 8 · max 13.23 us152
Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1Range 1; wakeup clock MSI = 48 MHztyp 4.5 · max 5.78 us152
Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1Range 1; wakeup clock HSI16 = 16 MHztyp 5.5 · max 7.1 us152
Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1Range 2; wakeup clock MSI = 24 MHztyp 5 · max 6.5 us152
Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1Range 2; wakeup clock HSI16 = 16 MHztyp 5.5 · max 7.1 us152
Wake up time from Stop 1 mode to Run mode in SRAM1 tWUSTOP1Range 2; wakeup clock MSI = 4 MHztyp 8.2 · max 13.5 us152
Wake up time from Stop 1 mode to Low-power run mode in Flash tWUSTOP1Regulator in low-power mode (LPR=1 in PWR_CR1); wakeup clock MSI = 2 MHztyp 12.7 · max 20 us152
Wake up time from Stop 1 mode to Low-power run mode in SRAM1 tWUSTOP1Regulator in low-power mode (LPR=1 in PWR_CR1); wakeup clock MSI = 2 MHztyp 10.7 · max 21.5 us152
Wake up time from Stop 2 mode to Run mode in Flash tWUSTOP2Range 1; wakeup clock MSI = 48 MHztyp 8 · max 9.4 us152
Wake up time from Stop 2 mode to Run mode in Flash tWUSTOP2Range 1; wakeup clock HSI16 = 16 MHztyp 7.3 · max 9.3 us152
Wake up time from Stop 2 mode to Run mode in Flash tWUSTOP2Range 2; wakeup clock MSI = 24 MHztyp 8.2 · max 9.9 us152
Wake up time from Stop 2 mode to Run mode in Flash tWUSTOP2Range 2; wakeup clock HSI16 = 16 MHztyp 7.3 · max 9.3 us152
Wake up time from Stop 2 mode to Run mode in Flash tWUSTOP2Range 2; wakeup clock MSI = 4 MHztyp 10.6 · max 15.8 us152
Wake up time from Stop 2 mode to Run mode in SRAM1 tWUSTOP2Range 1; wakeup clock MSI = 48 MHztyp 5.1 · max 6.7 us152
Wake up time from Stop 2 mode to Run mode in SRAM1 tWUSTOP2Range 1; wakeup clock HSI16 = 16 MHztyp 5.7 · max 8 us152
Wake up time from Stop 2 mode to Run mode in SRAM1 tWUSTOP2Range 2; wakeup clock MSI = 24 MHztyp 5.5 · max 6.65 us152
Wake up time from Stop 2 mode to Run mode in SRAM1 tWUSTOP2Range 2; wakeup clock HSI16 = 16 MHztyp 5.7 · max 7.53 us152
Wake up time from Stop 2 mode to Run mode in SRAM1 tWUSTOP2Range 2; wakeup clock MSI = 4 MHztyp 8.2 · max 16.6 us152
Wakeup time from Standby mode to Run mode tWUSTBYRange 1; wakeup clock MSI = 8 MHztyp 14.3 · max 20.8 us152
Wakeup time from Standby mode to Run mode tWUSTBYRange 1; wakeup clock MSI = 4 MHztyp 20.1 · max 35.5 us152
Wakeup time from Standby with SRAM2 to Run mode tWUSTBY SRAM2Range 1; wakeup clock MSI = 8 MHztyp 14.3 · max 24.3 us152
Wakeup time from Standby with SRAM2 to Run mode tWUSTBY SRAM2Range 1; wakeup clock MSI = 4 MHztyp 20.1 · max 38.5 us152
Wakeup time from Shutdown mode to Run mode tWUSHDNRange 1; wakeup clock MSI = 4 MHztyp 256 · max 330.6 us152
Oscillator frequency fOSC_IN-min 4 · typ 8 · max 48 MHz155
Feedback resistor RF-typ 200 kΩ155
HSE current consumption IDD(HSE)During startupmax 5.5 mA155
HSE current consumption IDD(HSE)VDD = 3 V; Rm = 30 Ω; CL = 10 pF@8 MHztyp 0.44 mA155
HSE current consumption IDD(HSE)VDD = 3 V; Rm = 45 Ω; CL = 10 pF@8 MHztyp 0.45 mA155
HSE current consumption IDD(HSE)VDD = 3 V; Rm = 30 Ω; CL = 5 pF@48 MHztyp 0.68 mA155
HSE current consumption IDD(HSE)VDD = 3 V; Rm = 30 Ω; CL = 10 pF@48 MHztyp 0.94 mA155
HSE current consumption IDD(HSE)VDD = 3 V; Rm = 30 Ω; CL = 20 pF@48 MHztyp 1.77 mA155
Maximum critical crystal transconductance GmStartupmax 1.5 mA/V155
Startup time tSU(HSE)VDD is stabilized; stabilized 8 MHz oscillationtyp 2 ms155
LSE current consumption IDD(LSE)LSEDRV[1:0] = 00; Low drive capabilitytyp 250 nA156
LSE current consumption IDD(LSE)LSEDRV[1:0] = 01; Medium low drive capabilitytyp 315 nA156
LSE current consumption IDD(LSE)LSEDRV[1:0] = 10; Medium high drive capabilitytyp 500 nA156
LSE current consumption IDD(LSE)LSEDRV[1:0] = 11; High drive capabilitytyp 630 nA156
Maximum critical crystal gm GmcritmaxLSEDRV[1:0] = 00; Low drive capabilitymax 0.5 uA/V156
Maximum critical crystal gm GmcritmaxLSEDRV[1:0] = 01; Medium low drive capabilitymax 0.75 uA/V156
Maximum critical crystal gm GmcritmaxLSEDRV[1:0] = 10; Medium high drive capabilitymax 1.7 uA/V156
Maximum critical crystal gm GmcritmaxLSEDRV[1:0] = 11; High drive capabilitymax 2.7 uA/V156
Startup time tSU(LSE)VDD is stabilizedtyp 2 s156
Electrostatic discharge voltage (human body model) VESD(HBM)TA = +25 °C; conforming to ANSI/ESDA/JEDEC JS-001; Class 2max 2000 V167
Electrostatic discharge voltage (charge device model) VESD(CDM)TA = +25 °C; conforming to ANSI/ESD STM5.3.1; Class C3max 250 V167
Output low level voltage for an I/O pin VOLCMOS port; |IIO| = 8 mA; VDDIOx ≥ 2.7 Vmax 0.4 V172
Output low level voltage for an I/O pin VOLTTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 Vmax 0.4 V172
Output high level voltage for an I/O pin VOHTTL port; |IIO| = 8 mA; VDDIOx ≥ 2.7 Vmin 2.4 V172
Output low level voltage for an I/O pin VOL|IIO| = 20 mA; VDDIOx ≥ 2.7 Vmax 1.3 V172
Output low level voltage for an I/O pin VOL|IIO| = 4 mA; VDDIOx ≥ 1.62 Vmax 0.45 V172
Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with "f" option) VOLFM+|IIO| = 20 mA; VDDIOx ≥ 2.7 Vmax 0.4 V172
Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with "f" option) VOLFM+|IIO| = 10 mA; VDDIOx ≥ 1.62 Vmax 0.4 V172
Output low level voltage for an FT I/O pin in FM+ mode (FT I/O with "f" option) VOLFM+|IIO| = 2 mA; 1.62 V ≥ VDDIOx ≥ 1.08 Vmax 0.4 V172
LCD external voltage VLCDmax 3.6 V203
LCD internal reference voltage 0 VLCD0typ 2.62 V203
LCD internal reference voltage 1 VLCD1typ 2.76 V203
LCD internal reference voltage 2 VLCD2typ 2.89 V203
LCD internal reference voltage 3 VLCD3typ 3.04 V203
LCD internal reference voltage 4 VLCD4typ 3.19 V203
LCD internal reference voltage 5 VLCD5typ 3.32 V203
LCD internal reference voltage 6 VLCD6typ 3.46 V203
LCD internal reference voltage 7 VLCD7typ 3.62 V203
VLCD external capacitance CextBuffer OFF (BUFEN=0 is LCD_CR register)min 0.2 · max 2 uF203
VLCD external capacitance CextBuffer ON (BUFEN=1 is LCD_CR register)min 1 · max 2 uF203
Supply current from VDD at VDD = 2.2 V ILCDBuffer OFF (BUFEN=0 is LCD_CR register)typ 3 uA203
Supply current from VDD at VDD = 3.0 V ILCDBuffer OFF (BUFEN=0 is LCD_CR register)typ 1.5 uA203
Supply current from VLCD (VLCD = 3 V) IVLCDBuffer OFF (BUFFEN = 0, PON = 0)typ 0.5 uA203
Supply current from VLCD (VLCD = 3 V) IVLCDBuffer ON (BUFFEN = 1, 1/2 Bias)typ 0.6 uA203
Supply current from VLCD (VLCD = 3 V) IVLCDBuffer ON (BUFFEN = 1, 1/3 Bias)typ 0.8 uA203
Supply current from VLCD (VLCD = 3 V) IVLCDBuffer ON (BUFFEN = 1, 1/4 Bias)typ 1 uA203
Total High Resistor value for Low drive resistive network RHNtyp 5.5 MΩ203
Total Low Resistor value for High drive resistive network RLNtyp 240 kΩ203
Segment/Common lowest level voltage V0typ 0 V203

Open-source boards using it

18See all 18
  • 4 layers46 × 46 mmU anemometer, the printed circuit board in 3D

    U anemometer

    PandoroML/LOAF

    LOAF (Local Observations and Atmospheric Forecasting) is an open source hyperlocal weather forecasting combining gridded forecasts with local station observations using machine learning and open-source hardware.

    144 parts14MIT
  • 4 layers101 × 53.3 mmHackboard, the printed circuit board in 3D

    Hackboard

    AdamTuraj/Hackboard

    An extended Arduino Uno clone based on the STM32L476RG

    65 parts7GPL-3.0
  • 4 layers61 × 46 mmTracking device, the printed circuit board in 3D

    Tracking device

    villetiukuvaara/SpyThing-Hardware

    128 parts4GPL-3.0
  • 4 layers61.3 × 61.3 mmCyton Mod, the printed circuit board in 3D

    Cyton Mod

    flosimn/Cyton-Mod

    135 parts1
  • 4 layers92 × 50.4 mmLevelSensor v2.0, the printed circuit board in 3D

    LevelSensor v2.0

    lucasnoce/IC-LevelSensor_v2

    Water level sensor with NBIoT data transmission

    125 parts1
  • 4 layers40 × 30 mmHealth Watch, the printed circuit board in 3D

    Health Watch

    abendezu10/PulseWatch

    Developed a fully functional smartwatch using an STM32 microcontroller, featuring real-time heart rate monitoring.

    37 parts
  • 2 layers80 × 60 mmPg id656, the printed circuit board in 3D

    Pg id656

    adasbl/main-controller-pcb

    Custom PCB for an autonomous wheeled robot

    47 parts
  • 4 layers64 × 74 mmKingfisher, the printed circuit board in 3D

    Kingfisher

    emoninet2/Kingfisher-DAC16

    A 16 channel. 16-bit DAC board.

    78 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STM32L476RGT6?

Yes. The symbol is MCU_ST_STM32L4:STM32L476RGTx and the footprint Package_QFP:LQFP-64_10x10mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STM32L476RGT6?

LQFP-64(10x10), with 64 pins. Its footprint is drawn on this page.

Where is the STM32L476RGT6 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STM32L476RGT6?

JLCPCB lists it as part C74797, with 8 in stock; the sellers' links on this page open their listings.

What can replace the STM32L476RGT6?

Parts like it in the library: the MSPM0G3507SPMR by Texas Instruments, the GD32F103RBT6 by GigaDevice, the GD32F103RCT6 by GigaDevice and the GD32F303RCT6 by GigaDevice. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STM32L476RGT6?

18 boards in 16 repositories on GitHub; the most starred are listed on this page, with their KiCad files.