

Kingfisher
A 16 channel. 16-bit DAC board.
- Size
- 64 × 74 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 105
- Pads
- 301
- Tracks, vias
- 658, 70
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Sep 2024
- Updated
- 10 Apr 2026
Overview
Kingfisher is an open-source printed circuit board by emoninet2, from the emoninet2/Kingfisher-DAC16 repository on GitHub. It is a 4-layer board of 64 × 74 mm with 78 parts on 105 nets, routed with 658 tracks and 70 vias.
It is built around the STM32L476RGT6, DAC81416RHAT and LDK130M33R, with the REF5025AID, HZ0805E601R-10 and BAT60AE6327HTSA1 among its other parts. Its parts include 30 capacitors, 16 connectors, 4 resistors, 4 ICs and 2 diodes. It belongs with the STM32 boards of this library.
Main components
8STM32L476RGT6
LQFP-64(10x10)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 1MB 32 Bit 51 80MHz ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)DAC81416RHAT
QFN-40-EP(6x6)-40℃~+125℃ 0.5LSB 1.7V~5.5V 12us 16 16 Power-on reset、Power-down mode、Bipolar output、Soft reset、Built-in reference source、Differential output、Built-in temperature sensor SPI Voltage Buffer QFN-40-EP(6x6) Digital to Analog Converters (DAC) ROHSTexas InstrumentsDigital To Analog Converters (DAC)LDK130M33R
SOT-23-5L-40℃~+125℃@(Tj) 1 3.3V 300mA 30uA 400mV@(300mA) 5.5V 55dB@(10kHz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23-5L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsREF5025AID
SOIC-8-40℃~+125℃@(Ta) 1.2mA 10mA 2.5V 2.7V~18V 8ppm/℃ Fixed Series ±0.1% SOIC-8 Voltage Reference ROHSTexas InstrumentsVoltage ReferenceHZ0805E601R-10
0805-40℃~+125℃ 1 300mΩ 500mA 600Ω@100MHz 0805 Ferrite Beads ROHSLairdFerrite BeadsBAT60AE6327HTSA1
SOD-323SOD-323 Schottky Diodes ROHSInfineon TechnologiesSchottky DiodesECS-160-20-4X-B
HC-49US-10℃~+70℃ 16MHz 20pF 40Ω ±30ppm ±50ppm HC-49US Crystals ROHSECSCrystalsFTSH-105-01-F-DV-K-P-TR
SMD,P=1.27mm-55℃~+125℃ 1.27mm 1.27mm 10P 2 2x5P 3.4A 5 5.64mm Black LCP Phosphor bronze Surface Mount,Vertical Tin UL94V-0 SMD,P=1.27mm Pin Headers ROHSSamtecWire To Board Connector
README
README.mdKingfisher-DAC16
A 16 channel. 16-bit DAC board.
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6, C10, C16, C19, C20, C21, C22, C23, C24, C25 |
| 10 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10 |
| 6 | 1uF | Capacitor_SMD:C_0805_2012Metric | C7, C9, C11, C13, C14, C30 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C8, C15, C27, C29 |
| 4 | MountingHole | MountingHole:MountingHole_3mm | H1, H2, H3, H4 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 3 | 10nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C12 |
| 3 | HZ0805E601R-10 | Inductor_SMD:L_0805_2012Metric | FB1, FB2, FB3 |
| 3 | Jumper_01x02_2.54mm | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP1, JP2, JP3 |
| 2 | 30pF | Capacitor_SMD:C_0805_2012Metric | C17, C18 |
| 2 | DAC_REF_SEL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12, J15 |
| 2 | DAC_VDD_SEL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11, J14 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 150nF | Capacitor_SMD:C_0805_2012Metric | C28 |
| 1 | 292304-1 | footprints:TE_292304-1 | J8 |
| 1 | 330pF | Capacitor_SMD:C_0805_2012Metric | C26 |
| 1 | 3V3 EXT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J3 |
| 1 | 5V EXT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J2 |
| 1 | BAT60AE6327HTSA1 | Diode_SMD:D_SOD-323 | D1 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J5 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Conn_02x16_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x16_P2.54mm_Horizontal | J16 |
| 1 | DAC81416RHAT | footprints:QFN50P600X600X100-41N-D | IC1 |
| 1 | DAC_EXT_REF | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J13 |
| 1 | ECS-160-20-4X | Crystal:Crystal_HC49-4H_Vertical | e1 |
| 1 | FTSH-105-01-F-DV-K-P-TR | footprints:FTSH-105-XX-YYY-DV-K-P-TR | J9 |
| 1 | LDK130M33R | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | LOGO | footprints:QR | G*** |
| 1 | REF5025AID | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | SEL 3V3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | SEL 5V | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | STM32L476RGT6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type059_RT06303HBWC_1x03_P3.50mm_Horizontal | J10 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J7 |
More from emoninet2/Kingfisher-DAC16
1- 4 layers64 × 74 mm

Similar boards
- 4 layers72 × 170.5 mm

- 4 layers221 × 71.5 mm

Hoatzin
mizzan-microtonal-piano/hoatzin
Hoatzin V1 Rev A from @mizzande is an encoder for the Fatar 88 keys supporting VFP3/15 3 pedal and aftertouch. The board offers connection over both standard MIDI and USB MIDI.
61 parts - 4 layers85 × 56 mm

- 4 layers65 × 30 mm

- 4 layers66 × 46 mm

Radar1
HearnChristian/k-band-fmcw-radar
24 GHz FMCW radar front-end in KiCad (WIP): ADF4159 chirp synth, BGT24LTR11 transceiver, custom Marki AMM-8211PSM driver-amp symbol/footprint, OPA1656 IF, ADS8353 ADC, FT2232H USB.
99 parts3 - 4 layers60 × 90 mm

- 4 layers188 × 110 mm

- 4 layers27 × 13 mm

Swd2usbc basic
alvarop/swd2usbc
Have you ever wanted to debug your device over USB-C? Sometimes there's not enough room for a JTAG/SWD connector, or even Tag-Connect pads!
6 parts29CC0-1.0
Questions
How big is the Kingfisher PCB?
It measures 64 × 74 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Kingfisher use?
78 parts, built around the STM32L476RGT6, DAC81416RHAT, LDK130M33R and REF5025AID. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kingfisher KiCad files?
From the emoninet2/Kingfisher-DAC16 repository on GitHub, at the commit this page was made from: the board is Board/V1RevA/Kingfisher.kicad_pcb and its schematic Board/V1RevA/Kingfisher.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kingfisher design in my own project?
Its repository states no licence, so its author keeps all rights: ask emoninet2 before reusing the design.