

DRO Final
- Size
- 250 × 96 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 134
- Nets
- 194
- Pads
- 539
- Tracks, vias
- 1,236, 145
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 Jul 2026
- Updated
- 28 Oct 2026
Overview
DRO Final is an open-source printed circuit board by kc099, from the kc099/kicad repository on GitHub. It is a 2-layer board of 250 × 96 mm with 134 parts on 194 nets, routed with 1,236 tracks and 145 vias.
It is built around the STM32F103C8T6, TM1637 and LM2596S-ADJ, with the 74HC14D, AMS1117-3.3 and 3296W-1-254LF among its other parts. Its parts include 53 capacitors, 44 resistors, 23 ICs, 5 connectors and 3 diodes. It belongs with the STM32 boards of this library.
Main components
10STM32F103C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 20KB 2V~3.6V 32 Bit 37 64KB 72MHz ARM Cortex-M3 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TM1637
SOP-20-300mil-40℃~+85℃ 20mA 4.5V~5.5V 400mW 500kHz 8 Segment x 6 Digit 80mA Adjustable Glow、Key Scan、Common Anode I²C SOP-20-300mil Digital Tube Drivers ROHSTMDigital Tube DriversLM2596S-ADJ
TO-263-5-40℃~+125℃@(TA) 1 1.2V~37V 150kHz 3A 40V 80uA Adjustable Buck Buck Built-in No TO-263-5 DC-DC Converters ROHSUMWDC-DC Converters74HC14D
SO-14-40℃~+125℃ 1 1.5V~4.2V 21ns@6V,50pF 2V~6V 2uA 300mV~1.2V 5.2mA 5.2mA 6 74HC Schmitt trigger SOIC-14 Inverters ROHSNexperiaInvertersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators3296W-1-254LF
SIP-3P,9.5x4.8mm25 250kΩ 500mW ±10% ±100ppm/℃ SIP-3P,9.5x4.8mm Potentiometers, Variable Resistors ROHSBournsPotentiometers & Variable ResistorsABLS-8.000MHZ-B2-T
HC-49S-SMD-20℃~+70℃ 18pF 80Ω 8MHz Crystal Oscillator ±20ppm ±50ppm HC-49S-SMD Crystals ROHSAbraconCrystalsSM6T33A
DO-214AA(SMB)ESD And Surge Protection (TVS/ESD)FUXINSEMISS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
134| Qty | Value | Footprint | References |
|---|---|---|---|
| 40 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24 +24 |
| 18 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C5, C39, C40, C41, C42, C43, C44, C45, C46, C47, C48, C49, C50 +2 |
| 12 | 100p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C17, C18, C19, C20, C23, C24, C27, C28, C31, C32, C35, C36 |
| 6 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7, C9, C11, C12, C53, C55 |
| 6 | 100u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15, C21, C25, C29, C33, C37 |
| 6 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C16, C22, C26, C30, C34, C38 |
| 6 | TM1637 | TM1637:TM1637_IC | U1, U3, U6, U7, U8, U9 |
| 6 | ~ | HB5514AESR:HB5514AESR | U19, U20, U21, U22, U23, U24 |
| 6 | ~ | PAD:3P3mm | U11, U12, U13, U14, U15, U16 |
| 3 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R10, R30 |
| 3 | Conn_01x09 | Connector_JST:JST_EH_B9B-EH-A_1x09_P2.50mm_Vertical | J1, J2, J3 |
| 2 | 12p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8, C10 |
| 2 | 74HC14D | 74HC14D:SOIC127P600X175-14N | U2, U4 |
| 2 | C | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C52, C54 |
| 2 | Conn_01x04 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J4, J5 |
| 1 | 1825910-6 | 1825910-6:SW_1825910-6-4 | SW1 |
| 1 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 2N3905 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | 3296W-1-254LF | 3296W-1-254LF:TRIM_3296W-1-254LF | VR1 |
| 1 | ABLS-8.000MHZ-B2-T | ABLS-8.000MHZ-B2-T:XTAL_ABLS-8.000MHZ-B2-T | Y2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U18 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_CUI_CST-931RP-A | BZ1 |
| 1 | DE1207-470 | DE1207-470:DE1207 | L1 |
| 1 | LM2596S-ADJ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U17 |
| 1 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R32 |
| 1 | SM6T33A | Diode_SMD:D_SMB | D3 |
| 1 | SS14 | Diode_SMD:D_SMA | D2 |
| 1 | SS34 | Diode_SMD:D_SMA | D4 |
| 1 | STM32F103C8T6 | STM32F103C8T6:QFP50P900X900X160-48N | U26 |
More from kc099/kicad
12- 4 layers107.5 × 102.5 mm

- 2 layers112.7 × 110.8 mm
/8-channel_relay/8-channel_relay.kicad_pcb.jpg?size=s&soon)
- 2 layers

- 4 layers199.6 × 47 mm

- 2 layers115 × 159 mm

- 2 layers102 × 95 mm

- 4 layers130.3 × 51.8 mm

- 2 layers102 × 95 mm

- 2 layers102 × 95 mm

- 4 layers122.9 × 51.8 mm

- 4 layers151.8 × 55.2 mm

- 2 layers107.5 × 102.5 mm

Similar boards
- 4 layers70 × 90 mm

Truecolors driver
whosmatt/truecolors
110% BT.2020 Mood Light based on the Nichia NUMB12 RGB Laser Array
110 partsMIT - 4 layers100 × 100 mm

- 4 layers67.5 × 96.5 mm

- 4 layers116.5 × 98 mm

Hw v1
Churrosoft/uEFI-v6.x
Speeduino compatible board, x4 ignition channels, x4 injection channels, 2&4 wire IAC
248 parts2 - 4 layers97.8 × 99.6 mm

- 2 layers84.4 × 80.2 mm

- 2 layers74 × 69 mm

- 4 layers45 × 46 mm

Hapcan cc led driver
jankralx/hapcan_cc_led_driver
Hapcan constant current LED driver with 3 channels
40 parts
Questions
How big is the DRO Final PCB?
It measures 250 × 96 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DRO Final use?
134 parts, built around the STM32F103C8T6, TM1637, LM2596S-ADJ and 74HC14D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DRO Final KiCad files?
From the kc099/kicad repository on GitHub, at the commit this page was made from: the board is DRO_Final/DRO_Final.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DRO Final design in my own project?
Its repository states no licence, so its author keeps all rights: ask kc099 before reusing the design.