

Smart Energy meter
This circuit will detect the change in current voltage variation. It will send the analog signal to esp32 circuit which used for live monitoring
- Size
- 115.9 × 45.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 66
- Pads
- 170
- Tracks, vias
- 241, 41
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 30 Jun 2026
- Updated
- 30 Jun 2026
Overview
Smart Energy meter is an open-source printed circuit board by kaviyarasu-s-ece, from the kaviyarasu-s-ece/Voltage-and-Current-Sensor repository on GitHub. It is a 2-layer board of 115.9 × 45.4 mm with 43 parts on 66 nets, routed with 241 tracks and 41 vias.
It is built around the ESP32-WROOM-32E, LM358 and AMS1117-3.3, with the TYPE-C-31-M-12 and ZMPT101B among its other parts. Its parts include 16 resistors, 13 capacitors, 5 connectors, 4 ICs and 2 switches. It belongs with the ESP32 boards of this library.
Main components
5ESP32-WROOM-32E
SMD,18x25.5mmSMD,18x25.5mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTYPE-C-31-M-12
SMD-30℃~+80℃ 1 10,000 cycles 16P 20V 5A 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB ConnectorsZMPT101B
插件0.2% 1:1 2mA 2mA 4P 4kV Straight Voltage Transformer 插件 Current Sense Transformers ROHSZHE MING LANG XICurrent Sense Transformers
README
README.mdVoltage-and-Current-Sensor
This circuit will detect the change in current voltage variation. It will send the analog signal to esp32 circuit which used for live monitoring
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R5, R7, R9, R10 |
| 2 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9, C10 |
| 2 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13, R14 |
| 2 | 10uF | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C11, C12 |
| 2 | 1nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C6 |
| 2 | 1uf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2 |
| 1 | .1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 100k | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
| 1 | 100k | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8 |
| 1 | 100nf | Capacitor_SMD:C_1206_3216Metric | C13 |
| 1 | 100pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
| 1 | 1nf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 5.1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 820k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | ACS712xLCTR-30A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | AMS1117-3.3 | MyFootprints:SOT229P700X180-4N | U4 |
| 1 | Conn_01x04 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J1 |
| 1 | ESP32-WROOM-32E | MyFootprints:ESP32-WROOM-32E | U3 |
| 1 | Fuse | Fuse:Fuseholder_Clip-5x20mm_Littelfuse_111_Inline_P20.00x5.00mm_D1.05mm_Horizontal | F1 |
| 1 | LM358 | MyFootprints:SOIC127P599X175-8N | U1 |
| 1 | R_Potentiometer_Trim | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | TYPE-C-31-M-12 | MyFootprints:HRO_TYPE-C-31-M-12 | J2 |
| 1 | ZMPT101B | MyFootprints:XFMR_ZMPT101B | T1 |
| 1 | ac input | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | current_i/p | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
Similar boards
- 2 layers115.9 × 45.4 mm

- 4 layers160.4 × 76.9 mm

Smartswitch board
Arhamee/hardware-portfolio
Multi-layer PCB designs in KiCad 10 schematic capture to fabrication-ready Gerbers. High-speed routing, BGA escape, power electronics.
116 partsMIT - 2 layers

- 2 layers25 × 30 mm

- 2 layers99.6 × 69.8 mm

- 2 layers260 × 440 mm

Multical
Samuelmathe/TFC-Multicanal-Goma
TFC ULPGL Goma - Systeme IoT multicanal de sous-comptage energetique (ESP32, KiCad, Flutter)
67 parts - 4 layers80.5 × 28.2 mm

- 2 layers96.5 × 48 mm

Questions
How big is the Smart Energy meter PCB?
It measures 115.9 × 45.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Smart Energy meter use?
43 parts, built around the ESP32-WROOM-32E, LM358, AMS1117-3.3 and TYPE-C-31-M-12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Smart Energy meter KiCad files?
From the kaviyarasu-s-ece/Voltage-and-Current-Sensor repository on GitHub, at the commit this page was made from: the board is Smart_Energy_meter.kicad_pcb and its schematic Smart_Energy_meter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Smart Energy meter design in my own project?
Its repository states no licence, so its author keeps all rights: ask kaviyarasu-s-ece before reusing the design.