6 layers122 × 98 mm
2 layers74 × 61 mm
SAME70Breakout
kavionic/SAME70BreakoutInitial version of the SAM E70 development board project.
- Size
- 74 × 61 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 90
- Pads
- 312
- Tracks, vias
- 1,956, 226
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 17 Oct 2017
- Updated
- 17 Oct 2017
Overview
SAME70Breakout is an open-source printed circuit board by kavionic, from the kavionic/SAME70Breakout repository on GitHub. It is a 2-layer board of 74 × 61 mm with 56 parts on 90 nets, routed with 1,956 tracks and 226 vias.
It is built around the AP2114H-3.3TRG1. Its parts include 24 capacitors, 9 resistors, 6 connectors, 3 inductors and 2 ICs. It belongs with the SAM D and SAM boards of this library.
Main components
1Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100n | MyCapacitors:C_0603 | C1, C3, C4, C5, C6, C8, C10, C13, C14, C15, C16, C18, C19, C24 |
| 4 | 100k | MyResistors:R_0603 | R3, R4, R5, R6 |
| 4 | 4u7 | MyCapacitors:C_0603 | C2, C7, C11, C12 |
| 4 | MountingHole | MyMechanical:MH7x3 | M1, M2, M3, M4 |
| 2 | 10k | MyResistors:R_0603 | R7, R8 |
| 2 | 24p | MyCapacitors:C_0603 | C20, C21 |
| 2 | 470R@100MHz | MyMagnetics:Choke_SMD_0603_Standard | L2, L3 |
| 2 | 6p | MyCapacitors:C_0603 | C22, C23 |
| 1 | 10p | MyCapacitors:C_0603 | C17 |
| 1 | 10u | MyMagnetics:L_0805 | L1 |
| 1 | 12MHz | MyFootprints:Crystal-3225 | Y2 |
| 1 | 1u | MyCapacitors:C_0603 | C9 |
| 1 | 200 | MyResistors:R_0603 | R1 |
| 1 | 2R2 | MyResistors:R_0603 | R2 |
| 1 | 32.768kHz | MyFootprints:Crystal_SMD_3215-2pin_3.2x1.5mm | Y1 |
| 1 | 5k62 | MyResistors:R_0603 | R9 |
| 1 | AP2114H-3.3TRG1 | MyFootprints:SOT-223 | U1 |
| 1 | ATSAME70NxxA-AN | Housings_QFP:LQFP-100_14x14mm_Pitch0.5mm | U2 |
| 1 | EIO1 | MyConnectors:IDC_Header_Straight_40pins | J1 |
| 1 | EIO2 | MyConnectors:IDC_Header_Straight_20pins | J4 |
| 1 | JTAGSEL | MyConnectors:PinHeader_1x03 | JP3 |
| 1 | LED_RED | MyDiodes:LED_0805 | D1 |
| 1 | MicroSD | MyConnectors:MicroSD | P1 |
| 1 | POWER | MyConnectors:PinHeaderMale_2x06 | J3 |
| 1 | SWD/JTAG | MyConnectors:BoxHeader_Straight_2x05_Pitch1.27mm | J2 |
| 1 | TST | MyConnectors:PinHeader_1x03 | JP4 |
| 1 | USB_OTG | MyConnectors:USB_Micro-B_Molex-105017-0001 | J5 |
| 1 | USB_PWR | MyConnectors:PinHeader_1x02 | JP5 |
| 1 | VREFN | MyConnectors:PinHeader_1x03 | JP1 |
| 1 | VREFP | MyConnectors:PinHeader_1x03 | JP2 |
Questions
How big is the SAME70Breakout PCB?
It measures 74 × 61 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SAME70Breakout use?
56 parts, built around the AP2114H-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SAME70Breakout KiCad files?
From the kavionic/SAME70Breakout repository on GitHub, at the commit this page was made from: the board is Schematics/SAME70Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SAME70Breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask kavionic before reusing the design.
Similar boards
- 6 layers100 × 70 mm
Sa800u baseboard hw
antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/
616 parts70Apache-2.0 - 2 layers65 × 56 mm
- 6 layers83.5 × 99.4 mm
- 2 layers35.8 × 34.2 mm
JATAYU S3
Quadcoach/Jatayu
JATAYU Flight Controller is an in-house, low-cost brushed drone flight controller being developed by The QU4D COACH.
42 parts5 - 4 layers100 × 50 mm
Chronolog
slemanz/chronolog
STM32-based temperature data logger with RTC, NOR flash storage, LCD and Wi-Fi. Hardware and firmware.
95 parts5 - 6 layers100 × 100 mm
- 2 layers90 × 98.5 mm
IO Board
FREILab/easyVerwaltungHardware
Hardware und Firmware für alle Geräte im Bezug zu easyVerwaltung
77 parts2