Skip to the content
2 layers96.5 × 71 mmGps logger, the printed circuit board in 3D

this is a gps device designed to record and track journeys without depending on a phone or a constant bluetooth connection.the idea behind this project is to make it easier to collect travel and movement data while…

Size
96.5 × 71 mm
Copper layers
2
Thickness
1.6 mm
Parts
47
Nets
89
Pads
247
Tracks, vias
604, 53
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
10 Oct 2026
Updated
19 Oct 2026

Overview

Gps logger is an open-source printed circuit board by kaushalch1, from the kaushalch1/gps-logger repository on GitHub. It is a 2-layer board of 96.5 × 71 mm with 47 parts on 89 nets, routed with 604 tracks and 53 vias.

It is built around the ESP32-S3-WROOM-1-N16R8, NEO-M9N-00B and AP2112K-3.3, with the BMI270, BQ24074RGTR and USBLC6-2SC6 among its other parts. Its parts include 14 resistors, 12 capacitors, 7 ICs, 5 switches and 3 connectors. It belongs with the radio and wireless boards and the ESP32 boards of this library.

Main components

7

README

README.md

gps Logger

About the Project

this is a gps device designed to record and track journeys without depending on a phone or a constant bluetooth connection.the idea behind this project is to make it easier to collect travel and movement data while hiking or cycling or exploring new places.

the device uses an esp-s3 as its main controller, along with a gps receiver and an oled display, a motion sensor, and a microsd card for storing data. it records information locally so that it can be accessed later, even without an internet connection.

Tools used

kicad ,github

how to build it

Step 1 — Solder passive components Step 2 — Install the ESP32-S3 Step 3 — Install the GPS module Step 4 — Install the OLED and IMU Step 5 — Install the microSD socket and controls Step 6 — Complete power circuitry St3ep 7-Flash your firmware

How It Works

When the pcb starts, it initializes the display, gps receiver, microSD card, motion sensor, and bluetooth. The display provides an overview of the device's current status.

When recording starts, the device creates a csv file on the microsd card. It periodically saves available gps information and motion sensor readings to that file.

Bluetooth allows commands to be sent to the device and recorded logs to be requested and since the data is stored locally, recording does not require an active bluetooth connection.

Features

  • GPS Tracking: Collects location, speed, altitude, and time information from the GPS receiver.
  • offline logging: Saves gps and sensor readings to a microsd card in csv format without needing a phone or Bluetooth connection.
  • OLED display: shows gps status, speed, battery voltage, and recording status.
  • Motion sensing: Uses the bmi270 accelerometer and gyroscope to collect movement data.
  • Bluetooth connectivity: allows a compatible phone or computer to communicate with the device and request recorded logs.
  • Physical controls: includes buttons for starting or stopping recordings and marking waypoints, and switching display pages.
  • Status indicators: Uses an led and buzzer to provide basic feedback during operation.

GPS Logger — Bill of Materials

NamePurposeQuantityTotal Cost (USD)LinkDistributor
ESP32-S3-WROOM-1-N16R8Main MCU (Wi-Fi/BLE)15.54LinkLCSC
NEO-M9N-00BGNSS receiver116.41LinkLCSC
BQ24074RGTRLi-ion battery charger / power path11.59LinkLCSC
AP2112K-3.3TRG13.3V LDO regulator10.13LinkLCSC
USBLC6-2SC6USB ESD protection10.13LinkLCSC
BMI270IMU (accelerometer/gyro)11.84LinkLCSC
0.91 inch OLED (ER-OLEDM0.91-1W-I2C)Display12.80LinkBuyDisplay
USB-C receptacle (TYPE-C-31-M-12)USB-C charging and data port10.19LinkLCSC
microSD socket (DM3AT-SF-PEJM5)Data logging storage11.12LinkLCSC
JST PH 2-pin header (B2B-PH-K-S)Battery connector10.03LinkLCSC
U.FL connector (U.FL-R-SMT-1)GNSS antenna connector10.19LinkLCSC
Tact switch (PTS645SM43SMTR92LFS)User buttons52.04LinkLCSC
Buzzer 12x9.5mm THTAudible alerts11.00LinkLCSC
2N3904Buzzer driver transistor10.01LinkLCSC
1N4148 (DO-35)Signal/protection diode10.01LinkLCSC
LED 0805 (red)Status LED10.01LinkLCSC
27nH inductor 0805RF matching inductor10.09LinkLCSC
10uF capacitor 0805Bulk/decoupling capacitors60.29LinkLCSC
1uF capacitor 0805Filter capacitor10.01LinkLCSC
100nF capacitor 0805IC bypass capacitors40.03LinkLCSC
47pF capacitor 0805Filter capacitor10.01LinkLCSC
Resistors 0805 (10k, 5k, 1.5k, 1.8k, 100k, 2.1k, 4.7k, 1k)Pull-ups, LED and divider resistors140.06LinkLCSC
PCB (bare boards)Main PCBs10.40LinkJLCPCB
PCB assembly (PCBA fees)SMT + through-hole assembly fees17.96LinkJLCPCB

Total estimated cost: USD 41.89

schematic

image # pcb image

Parts

47
QtyValueFootprintReferences
610uFCapacitor_SMD:C_0805_2012MetricC1, C3, C4, C5, C6, C8
5SW_PushButton_Switch_SMD:SW_SPST_PTS645Sx43SMTR92SW1, SW2, SW3, SW4, SW5
4100nFCapacitor_SMD:C_0805_2012MetricC7, C10, C11, C12
310kResistor_SMD:R_0805_2012MetricR1, R4, R12
2100kResistor_SMD:R_0805_2012MetricR7, R8
21kResistor_SMD:R_0805_2012MetricR13, R14
24.7kResistor_SMD:R_0805_2012MetricR10, R11
25kResistor_SMD:R_0805_2012MetricR2, R3
11.5kResistor_SMD:R_0805_2012MetricR5
11.8kResistor_SMD:R_0805_2012MetricR6
11N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1
11uFCapacitor_SMD:C_0805_2012MetricC2
12.1kResistor_SMD:R_0805_2012MetricR9
127nHInductor_SMD:L_0805_2012MetricL1
12N3904Package_TO_SOT_THT:TO-92_InlineQ1
147pFCapacitor_SMD:C_0805_2012MetricC9
1AP2112K-3.3Package_TO_SOT_SMD:SOT-23-5U3
1BMI270EasyEDA:LGA-14_L3.0-W2.5-P0.50-BRU7
1BQ24074RGTPackage_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mmU2
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1Conn_01x02_PinConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ4
1ER_OLEDM0.91_1x-I2CDisplay:ER_OLEDM0.91_1x-I2CU6
1ESP32-S3-WROOM-1EasyEDA:WIRELM-SMD_ESP32-S3-WROOM-1U1
1LEDLED_SMD:LED_0805_2012MetricD2
1Micro_SD_CardConnector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5J3
1NEO-M9NRF_GPS:ublox_NEOU5
1U.FL-R-SMT-1EasyEDA:ANT-SMD_UFL-R-SMT-1-10JP1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U4
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J1

Similar boards

  • 2 layers94.5 × 64 mmAir monitor, the printed circuit board in 3D

    Air monitor

    kaushalch1/air-monitor

    this is a portable air quality monitoring device designed to measure particulate matter and environmental conditions in real time.

    42 parts
  • 4 layers125 × 92 mmCarradio peripheral rev03, the printed circuit board in 3D

    Carradio peripheral rev03

    gschuurman/android_vendor_gschuurman_vehicle_interfaces

    vehicle interfaces for android automotive for a custom headunit

    269 parts
  • 4 layers150 × 95 mmSkysweep32 rev c, the printed circuit board in 3D

    Skysweep32 rev c

    bobberdolle1/SkySweep32

    Open-source passive multi-band RF monitoring system | 855–925 MHz, 2.4 GHz, 5.8 GHz | Rev C first prototype

    103 parts33GPL-3.0
  • 4 layers50 × 44.5 mmS3-motion logger, the printed circuit board in 3D

    S3-motion logger

    abdullahwaqar/s3-motion-logger

    ESP32-S3 motion logging board. It logs 6-axis IMU data to a microSD card and streams it over USB, BLE or Wi-Fi. It runs from a single-cell LiPo and charges over USB-C.

    77 parts
  • 4 layers58 × 102 mmAi mobile reader, the printed circuit board in 3D

    Ai mobile reader

    beishan/ai-mobile

    生成脚本依赖 KiCad 自带的 Python 和 pcbnew 模块。本机命令如下:

    79 parts
  • 4 layers99 × 70 mmRowOne, the printed circuit board in 3D

    RowOne

    Zoomwag/Vantis-X

    A UAB

    71 parts
  • 4 layers59 × 101 mmEnku mainboard r0.1, the printed circuit board in 3D

    Enku mainboard r0.1

    aliaksei-lameyka/ENKU-Base-reader

    Open enku-mainboard-r0.1.kicadpro with KiCad10.0.7. Matching PCB/root schematic and power.kicadsch, mcuio.kicadsch, epdhv.kicadsch, connectors.kicadsch are canonical.

    127 parts1CERN-OHL-W-2.0
  • 4 layers54 × 94 mmEnku mainboard r0.1, the printed circuit board in 3D

    Enku mainboard r0.1

    raznoglaz1y/enku

    Open-source compact e-reader built around a 3.97″ e-paper display and ESP32-S3.

    156 parts1Apache-2.0

Questions

How big is the Gps logger PCB?

It measures 96.5 × 71 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Gps logger use?

47 parts, built around the ESP32-S3-WROOM-1-N16R8, NEO-M9N-00B, AP2112K-3.3 and BMI270. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Gps logger KiCad files?

From the kaushalch1/gps-logger repository on GitHub, at the commit this page was made from: the board is pcb /pcb filees/gps_logger.kicad_pcb and its schematic pcb /pcb filees/gps_logger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Gps logger design in my own project?

Its repository states no licence, so its author keeps all rights: ask kaushalch1 before reusing the design.