Skip to the content
2 layers28.2 × 17.5 mmUSBTypeC to UART, the printed circuit board in 3D

USB Type C to Serial port convertor boards for new MacBooks and other laptops

Size
28.2 × 17.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
15
Pads
81
Tracks, vias
122, 14
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
14 Oct 2019
Updated
10 Feb 2021

Overview

USBTypeC to UART is an open-source printed circuit board by kattaliraees, from the kattaliraees/USBTypeC-to-UART repository on GitHub, published under the MIT licence. It is a 2-layer board of 28.2 × 17.5 mm with 15 parts on 15 nets, routed with 122 tracks and 14 vias.

It is built around the CP2102N-A01-GQFN24 and SP0503BAHTG. Its parts include 6 resistors, 4 capacitors, 2 diodes, 2 connectors and 1 IC. It belongs with the interfaces and adapters and microcontroller boards boards of this library.

Main components

2

README

README.md

USBTypeC-to-UART

USB Type C to Serial port convertor boards for new MacBooks and other laptops

  • KiCad Proect

  • CP2102N based

    Image of PCB

Parts

15
QtyValueFootprintReferences
2100nfCapacitor_SMD:C_0805_2012MetricC2, C4
24.7ufCapacitor_SMD:C_1206_3216MetricC1, C3
25.1KResistor_SMD:R_0603_1608MetricR5, R6
11.1KResistor_SMD:R_0603_1608MetricR1
1220Resistor_SMD:R_0603_1608MetricR4
122KResistor_SMD:R_0603_1608MetricR2
147KResistor_SMD:R_0603_1608MetricR3
1CP2102N-A01-GQFN24Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmU1
1Conn_01x06_MaleConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2
1LEDLED_SMD:LED_0805_2012Metric_CastellatedD2
1SP0503BAHTGPackage_TO_SOT_SMD:SOT-143D1
1USB_C_Receptacle_USB2.0Connector_USB:USB_C_Receptacle_GCT_USB4085J1

Similar boards

  • 4 layers69.8 × 69.8 mmFreeEEG32, the printed circuit board in 3D

    FreeEEG32

    neuroidss/FreeEEG32-alpha1.0

    ALPHA1.0 TEST FAILED, USE NEW VERSION INSTEAD FreeEEG32 alpha1.0 32 channels mobile electroencephalography under GNU AGPL 24 bits, 4kSPS ADCs 4x AD7770 MCU STM32F427ZI WIFI ESP-12F (ESP8266) USB CP2102N Accel & hyro…

    217 parts39AGPL-3.0
  • 2 layers100 × 99.2 mmUsb serial interface panelized, the printed circuit board in 3D

    Usb serial interface panelized

    willemcvu/midi-solenoid-driver

    A set of PCBs to drive solenoids using MIDI data, for use in automating musical instruments.

    114 parts21MIT
  • 2 layers65 × 56 mmESP32-Pi, the printed circuit board in 3D

    ESP32-Pi

    singleboardsolutions/Obsidian-ESP32

    Design Files for Obsidian ESP32

    65 parts16
  • 4 layers65.1 × 70 mmESP32-Zip Panelized, the printed circuit board in 3D

    ESP32-Zip Panelized

    vintlabs/ESP32-Zip

    ESP32 Development Module compatible with Pi Zero cases (hardware)

    88 parts10GPL-3.0
  • 2 layers73 × 100 mm12V SmartSwitch 2panel, the printed circuit board in 3D

    12V SmartSwitch 2panel

    vintlabs/ESP32-PWM-Driver-Devkit

    ESP WROOM-32 DevKit with 8 2A PWM Drivers (5-15V)

    160 parts5
  • 2 layers125 × 70 mmLTP305 ESP32 CLOCK, the printed circuit board in 3D

    LTP305 ESP32 CLOCK

    BasementCircuits/BulletTime

    ESP32 based clock using LTP305 led matrices

    65 parts4MIT
  • 2 layers25.2 × 59.4 mmEsp32-pcb, the printed circuit board in 3D

    Esp32-pcb

    krwc/doge32

    Yet another ESP32 PCB

    50 parts3
  • 2 layers90 × 80 mmVLAD, the printed circuit board in 3D

    VLAD

    icl-rocketry/VLAD-CanSat

    Repository Containing the hardware and firmware of VLAD, a stabby boi who will participate in the Mach-21 CanSat competition

    103 parts1

Questions

How big is the USBTypeC to UART PCB?

It measures 28.2 × 17.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the USBTypeC to UART use?

15 parts, built around the CP2102N-A01-GQFN24 and SP0503BAHTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USBTypeC to UART KiCad files?

From the kattaliraees/USBTypeC-to-UART repository on GitHub, at the commit this page was made from: the board is hardware/USBTypeC-to-UART.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the USBTypeC to UART design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).