
Main panel
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A custom 5-key macropad with a rotary encoder, an OLED display, and RGB indicators, powered by a Seeed XIAO RP2040.
Volume control Spetial buttons is an open-source printed circuit board by katonamozes, from the katonamozes/media-control-board repository on GitHub, published under the MIT licence. It is a 2-layer board of 68.5 × 138 mm with 12 parts on 12 nets, routed with 154 tracks and 10 vias.
It is built around the SK6812MINI-E. Its parts include 6 switches, 4 diodes, 1 IC and 1 connector. It belongs with the lEDs and displays and keyboards and input boards of this library.
A custom 5-key macropad with a rotary encoder, an OLED display, and RGB indicators, powered by a Seeed XIAO RP2040.
BOM: Everything that you need in order to make this hackpad 1x Seeed Studio XIAO RP2040 5x mechanical switches 1x rotary encoder with push-button 1x 0.91" I2C OLED 4x SK6812MINI-E RGB LEDs 1x Case (2 3d printed parts) 4x M3 bolts
The button connected to pin 10 plays the previous track. The button connected to pin 8 plays the next track. The button connected to pin 9 pauses the media. The button connected to pin 7 scrolls right. The button connected to pin 11 scrolls left.
The rotary encoder's button is connected to pin 6 and mutes. The Rotary encoder's rotation is connected to pin 4 and 5 and controls the volume.
The sk6812MINI-E leds are connected to pin 1.
The 0.91 inch OLED display is connected to pins 2(SCL) and 3(SDA).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5 |
| 4 | SK6812MINI-E | Hackpad:SK6812MINI-E_fixed | D1, D2, D3, D4 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | MOUDLE-SEEEDUINO-XIAO | Hackpad:XIAO-Generic-Hybrid-14P-2.54-21X17.8MM | U1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW6 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

makerforgetech/modular-biped
An open source framework for creating a bipedal modular companion robot.


It measures 68.5 × 138 mm and has 2 copper layers, 1.6 mm thick.
12 parts, built around the SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the katonamozes/media-control-board repository on GitHub, at the commit this page was made from: the board is myboard/pcb/Volume_control_Spetial_buttons.kicad_pcb and its schematic myboard/pcb/Volume_control_Spetial_buttons.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).