2 layers42 × 67 mm
2 layers132 × 75 mm
Minisplit
kata0510/minisplit32Ergonomics Split 40% Keyboard(6×4 +1key)
- Size
- 132 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 42
- Pads
- 524
- Tracks, vias
- 792, 10
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Jan 2018
- Updated
- 27 Jul 2018
Overview
Minisplit is an open-source printed circuit board by kata0510, from the kata0510/minisplit repository on GitHub. It is a 2-layer board of 132 × 75 mm with 65 parts on 42 nets, routed with 792 tracks and 10 vias.
Its parts include 25 diodes, 2 resistors, 2 ICs and 1 connector. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
README
README.mdminisplit
6×4 +1keys Split Keyboard
PCBSize:132mm×75mm
Parts
・PCB 2
・KeySwitch 50
・Diode 50 (1N4148,1N4148W)
・ProMicro 2
・TRRS Jack 2 (MJ-4PP-9,PJ320A)
・TACT Switch 1 (P-08073)
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | D | minisplit2-footprint:Diode_TH_SOD123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +9 |
| 25 | SW_PUSH | minisplit2-footprint:MX_PG1350_FLIP_HOLES | SW_1, SW_2, SW_3, SW_11, SW_12, SW_13, SW_14, SW_15, SW_16, SW_21, SW_22, SW_23, SW_24, SW_25, SW_26, SW_30 +9 |
| 4 | HOLE | minisplit2-footprint:hole | U_H1, U_H2, U_H3, U_H4 |
| 2 | ProMicro | minisplit-footprint:ProMicro | U1, U1 |
| 1 | 5PIN | minisplit-footprint:TRRS_JACK_MJ4PP9 | J1 |
| 1 | LOGO | minisplit2-footprint:icon_logo | G*** |
| 1 | LOGO | minisplit2-footprint:JUST_DO_IT | G*** |
| 1 | R1 | promicro:RESISTOR | R1 |
| 1 | R2 | promicro:RESISTOR | R2 |
| 1 | SW_PUSH | minisplit-footprint:TACT_SWITCH_TVBP06 | RES1 |
| 1 | jumper_smd | ergo42:jumper_smd_2dub | W1 |
The 63 most common of 65 parts.
Questions
How big is the Minisplit PCB?
It measures 132 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Minisplit use?
65 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Minisplit KiCad files?
From the kata0510/minisplit repository on GitHub, at the commit this page was made from: the board is MiniSplit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Minisplit design in my own project?
Its repository states no licence, so its author keeps all rights: ask kata0510 before reusing the design.
Similar boards
- 2 layers198.1 × 30.5 mm
Splitflap driver
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
65 parts744MIT - 2 layers74.8 × 32.5 mm
- 2 layers60 × 100 mm
V3 Connector Only
PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)
65 parts439GPL-2.0 - 2 layers45 × 58.2 mm
- 2 layers27.9 × 101.6 mm
- 2 layers40 × 120 mm
Photodiode board v3
0x23/nmWave-Interferometer
An Open Source Interferometer for Accurate Distance Measurements
65 parts151MIT - 2 layers78 × 130 mm
Lofence
kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.
65 parts142MIT