

- Size
- 26 × 16 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 30
- Pads
- 53
- Tracks, vias
- 60, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Jan 2026
- Updated
- 24 Feb 2026
Overview
IMU is an open-source printed circuit board by karagure, from the karagure/modulx-pcb repository on GitHub. It is a 2-layer board of 26 × 16 mm with 9 parts on 30 nets, routed with 60 tracks and 0 vias.
It is built around the ICM-20948 and PCA9306D. Its parts include 4 ICs, 3 capacitors and 2 resistors. It belongs with the sensors and measurement boards of this library.
Main components
2ICM-20948
QFN-24(3x3)-40℃~+85℃ 0.5KB 1.71V~3.6V 16bit 8uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24(3x3) Accelerometers ROHSTDK InvenSenseAccelerometersPCA9306D
SO-8-40℃~+105℃ 1 1.8V~5.5V 1V~3.6V 2 2Mbps Automatic direction detection、Output enable high-impedance Bidirectional Level translator Open-drain SMBus、I2C SO-8 Translators, Level Shifters ROHSNXP SemiconductorsTranslators, Level Shifters
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10µF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 4.7kΩ | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | 0.1µF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | ICM-20948 | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm | U2 |
| 1 | I²C | Connector_Molex:Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal | U4 |
| 1 | MIC5219-1.8V | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | PCA9306 | Package_TO_SOT_SMD:SOT-23-8 | U1 |
More from karagure/modulx-pcb
2- 2 layers

- 2 layers

Similar boards
- 2 layers17.5 × 29.5 mm

Micro logger
GaitRehabilitation/mini_data_capture
The current maintainers of this repository are:
33 partsApache-2.0 - 2 layers25 × 19 mm

- 4 layers17.5 × 47 mm

- 4 layers94 × 50.8 mm

- 8 layers120 × 60 mm

DFTBoard
juliancoy/zynqPCB
An 8-layer board in Kicad built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, and Arduino Uno style header for screen connection
299 parts75MIT - 2 layers130 × 120 mm

- 4 layers198 × 161 mm

- 4 layers77.1 × 63.8 mm

Questions
How big is the IMU PCB?
It measures 26 × 16 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IMU use?
9 parts, built around the ICM-20948 and PCA9306D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IMU KiCad files?
From the karagure/modulx-pcb repository on GitHub, at the commit this page was made from: the board is motherboard/IMU.kicad_pcb and its schematic motherboard/IMU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IMU design in my own project?
Its repository states no licence, so its author keeps all rights: ask karagure before reusing the design.