
Kicad sheet6
horychen/ProjectEureka
12 phase motor drive including inverter, microcontroller-mother-board, sensing, communication, DAC, etc.

Pauline Floppy disk dumper and Floppy drive emulator
Pauline is an open-source printed circuit board by jfdelnero, from the jfdelnero/Pauline repository on GitHub. It is a 4-layer board of 77.1 × 63.8 mm with 160 parts on 155 nets, routed with 2,651 tracks and 145 vias.
It is built around the 74LCX125MX, SN74LS06D and PCA9306D, with the ESW-120-33-T-D, BAS16W and BC817K-40HVL among its other parts. Its parts include 105 resistors, 16 capacitors, 13 ICs, 8 connectors and 4 diodes.
Pauline is an open-source, powerful, universal and simple to use tool that will allow you to scan with precision the content of the magnetic disks you want to archive, regardless of their format.
Pauline is a tool developed within the association La Ludothe`que Française, in partnership with the associations Game Preservation Society located in Japan, and MO5.COM located in France.
https://www.laludotheque.fr/projets-en-cours/preservation-des-disquettes-pauline/

And many more !
This use the HxCFloppyEmulator software repository as submodule so the proper way to clone the project is :
git clone --recursive https://github.com/jfdelnero/Pauline.gitTo update the repository :
git pull
git submodule update --init --recursiveHxC Floppy Emulator project
Generic/universal floppy disk drive emulators
Copyright (C) 2006-2026 Jean-François DEL NERO / HxC2001
Email : hxc2001(at)hxc2001.com
Website : https://hxc2001.com http://hxc2001.free.fr/floppy_drive_emulator
Forum : https://torlus.com/floppy/forum
Facebook : https://www.facebook.com/groups/hxc2001/
Twitter : https://twitter.com/jfdelnero
| Qty | Value | Footprint | References |
|---|---|---|---|
| 68 | 1K | Resistor_SMD:R_0603_1608Metric | R31, R32, R33, R34, R35, R36, R37, R38, R39, R40, R100, R101, R102, R103, R104, R105 +52 |
| 32 | 2K2 | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +16 |
| 14 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 6 | MC74LVX14DR2G | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2, U4, U6, U8, U10, U12 |
| 5 | SN74LS06D | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U3, U5, U7, U9 |
| 3 | 0R | Resistor_SMD:R_0603_1608Metric | R94, R95, R96 |
| 3 | Schurter 693-1301.9302 | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3 |
| 2 | symbol:LOGO_HXC2001 | , | |
| 2 | symbol:LOGO_LLF | , | |
| 2 | symbol:LOGO_Pauline2 | , | |
| 2 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C15, C16 |
| 2 | 150R | Resistor_SMD:R_0603_1608Metric | R87, R88 |
| 2 | ESW-120-33-T-D | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1, J2 |
| 2 | Wurth 61203421621 | Connector_IDC:IDC-Header_2x17_P2.54mm_Vertical | J3, J4 |
| 1 | symbol:LOGO_GPS | G*** | |
| 1 | symbol:LOGO_MO5 | ||
| 1 | 0805 CMS GREEN LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | 0805 CMS RED LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | 74LCX125MX | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U11 |
| 1 | Amphenol FCI 10129378-908001BLF | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | BAS16W | Package_TO_SOT_SMD:SOT-323_SC-70 | D3 |
| 1 | BC817K-40HVL | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CPT-9019S-SMT-TR | Buzzer_Beeper:Buzzer_CUI_CPT-9019S-SMT | LS1 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | HIF3FC-10PA-2.54DSA | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J5 |
| 1 | Littelfuse 1812L260SLPR | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | PCA9306 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U14 |
| 1 | SMBJ5.0A | Diode_SMD:D_SMB | D4 |
| 1 | TE Connectivity 5-534237-2 REC 1X04P | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J7 |

horychen/ProjectEureka
12 phase motor drive including inverter, microcontroller-mother-board, sensing, communication, DAC, etc.

silvervest/c64pico
This is a tiny emulated C64 running on a Raspberry Pi Pico! Full details of the build can be found at https://www.youtube.com/watch?v=hgLhGpbC6E4

animesh-chouhan/open-telegraph
A pocket-size Morse key. One button, one RGB LED, an ESP32-S3, and a battery. Plug it in over USB-C or pair it over Bluetooth and it types Morse into any device as a standard keyboard. Fully open, down to the copper.

CircuitGuy943/Sabre-Integrated-flight-controller
(🚧) A "Jack of all trades" custom flight controller board. With support for both power and control and the ability for custom firmware

dmatscheko/water_kettle
ESP32-S3 running ESPHome on a custom KiCad PCB for the base of a SEVERIN WK 3479 water kettle

enliktjioe/three-workshops
HfK Bremen - Three Workshops course from Ralf Baecker

huulanka/wisp
Open-source ESP32 room climate monitor — CO2, VOC, humidity, temperature and light sensing with custom PCB, MQTT/HomeKit integration, and OTA firmware updates. Full hardware + software, from schematic to BOM.

OpenParol/OpenParol-Board
Open-source project for a 6-DOF robotic arm controller
It measures 77.1 × 63.8 mm and has 4 copper layers, 1.6 mm thick.
160 parts, built around the 74LCX125MX, SN74LS06D, PCA9306D and ESW-120-33-T-D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jfdelnero/Pauline repository on GitHub, at the commit this page was made from: the board is Hardware_Pauline/Pauline_RevB_4Layers/pauline.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jfdelnero before reusing the design.