2 layers90 × 60 mm
Gotek Floppy Disk Emulator V2
RichardRozehnal/Gotek-Floppy-Disk-Emulator-V2
Floppy disk emulator for old computers and machines, Amiga, Atari ST, etc.
66 parts66GPL-3.0
2 layers91 × 55 mm
Tiny sound card
kamiyaowl/tiny_sound_card1Arduino Pro Mini同等のボードで、mp3を再生したりできるモジュール
- Size
- 91 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 46
- Pads
- 168
- Tracks, vias
- 657, 226
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 19 Aug 2018
- Updated
- 1 Sep 2018
Overview
Tiny sound card is an open-source printed circuit board by kamiyaowl, from the kamiyaowl/tiny_sound_card repository on GitHub, published under the MIT licence. It is a 2-layer board of 91 × 55 mm with 49 parts on 46 nets, routed with 657 tracks and 226 vias.
It is built around the ATMEGA328P-AU, DFR0299 and STMPS2141S. Its parts include 12 capacitors, 12 connectors, 11 resistors, 6 switches and 2 ICs. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
DFR0299
THroughholeTHroughhole V-Audio Modules ROHSDFRobotV-Audio Modules
STMPS2141S
SOT-23-5-40℃~+85℃ 1 2.7V~5.5V 500mA 90mΩ Active Low High Side Switch Short-Circuit Protection(SCP)、Undervoltage Protection(UVP)、Overcurrent Protection(OCP)、Overtemperature protection (OTP) SOT-23-5 Power Distribution Switches ROHSSTMicroelectronicsAnalog Switches, Multiplexers
README
README.mdtiny_sound_card
名刺サイズのボードでArduino Pro Mini同等のボードで、mp3を再生したりできるモジュール
ドア開閉時の音声再生モジュールや簡易mp3プレイヤーを簡単に制作できます。
特徴
- Arduino Pro Miniと同じ開発環境で開発を行え、mp3の音声再生が簡単に行なえます
- スイッチ、mp3再生モジュール、外部スイッチ、SPI、I2Cの準備がしており拡張が容易です
- 表面実装部品が2個のみと、はんだづけの難易度が低いです
- 殆どの部品を秋月電子で購入可能です
HW仕様
| ピン番号 | ボード機能 | ピン機能 | 備考 |
|---|---|---|---|
| D0 | PinHeader | UART RXD | Arduino Bootloader書き込み用 |
| D1 | PinHeader | UART TXD | Arduino Bootloader書き込み用 |
| D2 | LED | Digital Output | |
| D3 | PinHeader | Digital Input | スイッチ入力用。チャタリング防止回路有 |
| D4 | SW0 | Digital Input | スライドスイッチ |
| D5 | BTN0 | Digital Input | タクトスイッチ0 |
| D6 | BTN1 | Digital Input | タクトスイッチ1 |
| D7 | BTN2 | Digital Input | タクトスイッチ2 |
| D8 | BTN3 | Digital Input | タクトスイッチ3 |
| D9 | mp3player Control | UART TXD | mp3モジュール制御用 |
| D10 | PinHeader | Digital Output | 外部モジュール接続用SPI |
| D11 | PinHeader | SPI MOSI | 外部モジュール接続用SPI |
| D12 | PinHeader | SPI MISO | 外部モジュール接続用SPI |
| D13 | PinHeader | SPI SCK | 外部モジュール接続用SPI |
| A0(D14) | mp3player Control | UART RXD | mp3モジュール制御用 |
| A1(D15) | mp3player Control | Digital Input | mp3player再生中にLow |
| A2(D16) | mp3player Power Control | Digital Output | mp3player電源EN |
| A3(D17) | mp3player Power Control | Digital Input | mp3player電源/FAULT |
| A4 | PinHeader | I2C SDA | 外部モジュール接続用I2C |
| A5 | PinHeader | I2C SCL | 外部モジュール接続用I2C |
- スイッチ回路(D3,4,5,6,7,8)にはチャタリング防止回路を実装
- SPI端子はISP(In System Programming)回路も兼用しています
- mp3 playerとはSoftwareSerialを使用して通信を行います
- mp3 playerモジュールの消費電力が大きいため、ハイサイドスイッチで電源断できるようになっています
- 不要であれば、U1の1-5pinを短絡してください
- Datasheet
SW仕様
準備予定
製造ファイル
| ファイルパス | 種別 |
|---|---|
kicad/gerber | 基盤製造ファイル |
kicad/acrylic_cover/tiny_sound_card-Eco1.User.svg | 表面アクリルカバー |
kicad/acrylic_cover/tiny_sound_card-Eco2.User.svg | 裏面アクリルカバー |
購入部品
License
MIT
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1u | Capacitors_ThroughHole:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2, C3, C6, C7, C9, C10, C11, C12, C13 |
| 6 | 47k | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R9, R10, R11, R12, R13 |
| 4 | M3Drill | kamiya:M3Drill2 | P4, P8, P9, P10 |
| 4 | SW_PUSH | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW2, SW3, SW4, SW6 |
| 3 | 10k | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R6 |
| 2 | 1k | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R4 |
| 2 | 22p | Capacitors_ThroughHole:C_Disc_D3.8mm_W2.6mm_P2.50mm | C4, C5 |
| 2 | SlideSW | kamiya:SK-12D01-VG4 | SW1, SW5 |
| 1 | 16MHz | Crystals:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 47uF | Capacitors_ThroughHole:CP_Radial_D10.0mm_P2.50mm | CP1 |
| 1 | ATMEGA328P-A | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | IC1 |
| 1 | BARREL_JACK | Connect:BARREL_JACK | CON1 |
| 1 | DFR0299 | kamiya:DFR0299 | M1 |
| 1 | EXT_I2C | Pin_Headers:Pin_Header_Angled_1x04_Pitch2.54mm | P4 |
| 1 | EXT_PWR | Pin_Headers:Pin_Header_Angled_1x03_Pitch2.54mm | P1 |
| 1 | EXT_SPI/ISP | Pin_Headers:Pin_Header_Angled_1x07_Pitch2.54mm | P7 |
| 1 | EXT_SW0 | Pin_Headers:Pin_Header_Angled_1x02_Pitch2.54mm | P5 |
| 1 | EXT_UART | Pin_Headers:Pin_Header_Angled_1x04_Pitch2.54mm | P6 |
| 1 | LED | LEDs:LED_D3.0mm | D1 |
| 1 | LOGO | kicad:logo-silk | G*** |
| 1 | MAX:50mA | Capacitors_ThroughHole:C_Rect_L7.0mm_W4.5mm_P5.00mm | F1 |
| 1 | SPKOUT | Pin_Headers:Pin_Header_Angled_1x02_Pitch2.54mm | P2 |
| 1 | STMPS2141S | TO_SOT_Packages_SMD:SOT-23-5 | U1 |
| 1 | TRS_JACK | kamiya:3.5mm_TRS_Mini | J1 |
Similar boards
- 2 layers
Stm32f4 control board
alxhoff/RGB-Mechanical-Keyboard
Mechanical keyboard with various configurations and "in-PCB" WS2812 RGB LEDs
52 parts2GPL-3.0 - 2 layers76 × 53 mm
Mp3 player pcb v1
marian-millan/mp3_player
A retro-inspired hardware MP3 player built from scratch. Features KiCad schematics, PCB layouts, and 3D models for a physical-media-inspired music experience.
55 parts1 - 2 layers69.1 × 56.6 mm
- 2 layers52 × 43 mm
MP3 Player
hackclub/reflow
A YSWS for the northern hemisphere's summer and the aussie's winter. Run by @pmnlla, with love and loads of carrots.
46 parts2 - 2 layers104.7 × 135.6 mm
- 2 layers145.4 × 70 mm
- 2 layers48.2 × 28.3 mm
Questions
How big is the Tiny sound card PCB?
It measures 91 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tiny sound card use?
49 parts, built around the ATMEGA328P-AU, DFR0299 and STMPS2141S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tiny sound card KiCad files?
From the kamiyaowl/tiny_sound_card repository on GitHub, at the commit this page was made from: the board is kicad/tiny_sound_card.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tiny sound card design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).