Skip to the content
2 layers215 × 100 mmTrain de mine, the printed circuit board in 3D
Size
215 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
106
Nets
91
Pads
512
Tracks, vias
821, 22
Pours
6
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
27 May 2024
Updated
27 May 2024

Overview

Train de mine is an open-source printed circuit board by kaeserberg, from the kaeserberg/mine-train-pcb repository on GitHub. It is a 2-layer board of 215 × 100 mm with 106 parts on 91 nets, routed with 821 tracks and 22 vias.

It is built around the DRV8871DDA, PCA9685PW and AO3400A. Its parts include 30 capacitors, 24 connectors, 17 resistors, 15 ICs and 2 transistors.

Main components

3

README

README.md

Parts

106
QtyValueFootprintReferences
152604-1102KFM:KFM736L-5.0-2PJ9, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23
130.1uFCapacitor_SMD:C_0805_2012MetricC1, C3, C5, C7, C9, C11, C13, C15, C17, C19, C21, C23, C25
1322uFCapacitor_SMD:CP_Elec_6.3x7.7C2, C4, C6, C8, C10, C12, C14, C16, C18, C20, C22, C24, C26
1330kResistor_SMD:R_0603_1608MetricR3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15
13DRV8871DDAPackage_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalViasU3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14, U15
7LOGOLOGOCFK Logo, G***, G***, G***, G***, G***, G***
4MountingHoleMountingHole:MountingHole_3.2mm_M3_DIN965_PadH1, H2, H3, H4
2100nFCapacitor_SMD:C_0603_1608MetricC28, C30
21kPCM_Resistor_SMD_AKL:R_0603_1608MetricR16, R17
222uFCapacitor_SMD:C_0603_1608MetricC27, C29
24.7KResistor_SMD:R_0603_1608MetricR1, R2
2AO3400APackage_TO_SOT_SMD:SOT-23Q1, Q2
2GNDTestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mmTP1, TP7
1+5VTestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mmTP2
11Wemos:S3 MiniU1
13.3VTestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mmTP6
1ALIM BLOCSKFM:KFM736L-5.0-2PJ1
1ALIM ESPKFM:KFM736L-5.0-2PJ2
1ALIM LEDSKFM:KFM736L-5.0-2PJ6
1ALIM MOTORSKFM:KFM736L-5.0-2PJ3
1ALIM SENSORSKFM:KFM736L-5.0-2PJ4
1BTN1KFM:KFM736L-5.0-2PJ5
1BTN2KFM:KFM736L-5.0-2PJ7
1Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ24
1PCA9685PWPackage_SO:TSSOP-28_4.4x9.7mm_P0.65mmU2
1SENSORSKFM:KFM736L-5.0-8PJ8
1VBLOCTestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mmTP3
1VLEDTestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mmTP5
1VMOTORTestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mmTP4

Similar boards

  • 4 layers81.3 × 52.8 mmGlue Board, the printed circuit board in 3D

    Glue Board

    arkorobotics/robocar-pinky

    DIY Robocar Project - Codename Pinky

    87 parts12
  • 2 layers65.6 × 56 mmWw2020, the printed circuit board in 3D

    Ww2020

    dkjonas/WildWillyHardware

    69 parts11
  • 4 layers94.4 × 92.2 mmWildWillyR5Hardware, the printed circuit board in 3D

    WildWillyR5Hardware

    dkjonas/WildWillyR5Hardware

    Schematic and board layout for the R5 version of my robot.

    82 parts1
  • 2 layers83.3 × 56.5 mmPhone bell, the printed circuit board in 3D

    Phone bell

    purduehackers/phone-bell

    A Rotary Phone Doorbell

    53 parts4
  • 2 layers25.5 × 12 mmSparkV1, the printed circuit board in 3D

    SparkV1

    JoaoWMHentz/WickV1

    Este repositório contém o firmware do WICK V1, desenvolvido para microcontroladores AVR da família ATtiny, como o ATtiny1616, utilizando sinais PPM para controle e PWM para acionamento dos motores.

    31 parts1
  • 2 layers114.3 × 25.4 mmIr transmitter, the printed circuit board in 3D

    Ir transmitter

    adeboni/electronics

    This repository stores code for various electronics projects I've made

    92 parts
  • 4 layers130 × 100 mmAtlas carrier ctrl, the printed circuit board in 3D

    Atlas carrier ctrl

    md-sazzad-eee/ATLAS

    Modular multi-robot system: a carrier robot that docks, transports, charges and redeploys two small agent robots. KiCad, FreeCAD, MATLAB/Simulink, COMSOL and ESP32 firmware.

    157 parts
  • 4 layers80 × 99 mmSpool, the printed circuit board in 3D

    Spool

    TheCacophonyProject/spool-pcb

    161 partsCERN-OHL-W-2.0

Questions

How big is the Train de mine PCB?

It measures 215 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Train de mine use?

106 parts, built around the DRV8871DDA, PCA9685PW and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Train de mine KiCad files?

From the kaeserberg/mine-train-pcb repository on GitHub, at the commit this page was made from: the board is train-de-mine.kicad_pcb and its schematic mosfet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Train de mine design in my own project?

Its repository states no licence, so its author keeps all rights: ask kaeserberg before reusing the design.