2 layers121 × 68 mm
Freeds sanchez
pablozg/freeds
Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora
42 parts108
2 layers87.5 × 86.4 mm
Rfswitch
jypma/AvrLibDemo3- Size
- 87.5 × 86.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 66
- Pads
- 170
- Tracks, vias
- 468, 26
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 31 Mar 2015
- Updated
- 18 Dec 2020
Overview
Rfswitch is an open-source printed circuit board by jypma, from the jypma/AvrLibDemo repository on GitHub. It is a 2-layer board of 87.5 × 86.4 mm with 58 parts on 66 nets, routed with 468 tracks and 26 vias.
It is built around the HLK-PM01, SFH6916 and 431KD10. Its parts include 20 resistors, 9 connectors, 7 ICs, 5 fuses and 4 capacitors.
Main components
3
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
SFH6916
SOP-16-4.6mm-55℃~+100℃ 1.15V 100mV@1mA,20mA 3.75kV 300% 3us 4 4us@2mA,100Ω 50% 50mA 50mA 6V 700mW 70V DC Phototransistor SOP-16-4.6mm Transistor, Photovoltaic Output Optoisolators ROHSVishay IntertechnologyTransistor, Photovoltaic Output Optoisolators
431KD10
插件,P=7.5mm230pF@1kHz 275V 3.5kA 350V 400mW 430V 65J 710V 插件,P=7.5mm Varistors ROHSBrightkingVaristors
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10k | Resistors_SMD:R_0603_HandSoldering | R3, R5, R12, R14, R19, R21, R26, R28 |
| 4 | 0.1u | mylib:C_Rect_L16.5mm_W6mm_P15.00mm_MKT | C1, C2, C3, C4 |
| 4 | 1k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R9, R16, R23 |
| 4 | 2.9k | Resistors_SMD:R_0603_HandSoldering | R1, R6, R7, R8 |
| 4 | 330 | Resistors_SMD:R_0603_HandSoldering | R4, R13, R20, R27 |
| 4 | Fuse 2A | Fuse_Holders_and_Fuses:Fuseholder5x20_horiz_SemiClosed_Casing10x25mm | F2, F3, F4, F5 |
| 4 | G3MB-202P-5V | mylib:G3MB-202P-5V | U3, U5, U8, U10 |
| 4 | Q_NPN_BEC | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | 431KD10 | Varistors:RV_Disc_D12_W3.9_P7.5 | RV1 |
| 1 | CONN_AC | mylib:CONN_AC_SW2 | J1 |
| 1 | CONN_AC_SW1 | mylib:CONN_AC_SW2 | J3 |
| 1 | CONN_AC_SW2 | mylib:CONN_AC_SW2 | J4 |
| 1 | CONN_AC_SW3 | mylib:CONN_AC_SW2 | J7 |
| 1 | CONN_AC_SW4 | mylib:CONN_AC_SW2 | J9 |
| 1 | CONN_BTNS | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | BTN |
| 1 | CONN_LEDS | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | LED |
| 1 | CONN_O1 | mylib:CONN_AC_SW2 | J2 |
| 1 | CONN_O2 | mylib:CONN_AC_SW2 | J6 |
| 1 | CONN_O3 | mylib:CONN_AC_SW2 | J8 |
| 1 | CONN_O4 | mylib:CONN_AC_SW2 | J10 |
| 1 | Fuse 8A | Fuse_Holders_and_Fuses:Fuseholder5x20_horiz_SemiClosed_Casing10x25mm | F1 |
| 1 | HLK-PM01 | mylib:HLK-PM01 | U1 |
| 1 | SFH6916 | Housings_SSOP:SOP-16_4.4x10.4mm_Pitch1.27mm | U2 |
| 1 | TINY328 | mylib:TINY328_CONN | U6 |
The 52 most common of 58 parts.
Similar boards
- 2 layers129.9 × 63.6 mm
Traeger rev 2.3.0.kicad pro
jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an
45 parts36 - 2 layers111.8 × 57.2 mm
- 2 layers89.8 × 72.1 mm
HestiaPiOneUniversal
HestiaPi/hestia-touch-pcb-dev
Testing release for the PCB files for HestiaPi Touch
18 parts11GPL-3.0 - 2 layers93 × 61 mm
Zero crossing detector
cs2dsb/zcssr
A PCB and software for a SSR controller that monitors mains AC zero crossings to determine when to turn the SSR on.
98 parts10Apache-2.0 - 2 layers99.1 × 58.4 mm
HEAT
milar111/HEAT
An open-source STM32 SMD assembly station for precision soldering. Uses a custom Smart Pulse & Coast algorithm to drive 400W mains heaters via SSR. Features OLED UI, NTC feedback, and safety cooling.
57 parts9 - 2 layers75 × 75 mm
HotPlateController
stasiselectronics/HotPlateController
A simple ESP32 connected controller for a SMD reflow hot plate
47 parts9 - 2 layers70 × 70 mm
AirSensor display
MarcFinns/AirSensor-for-HomeAssistant
AirSensor for HomeAssistant (hardware and software)
30 parts8
Questions
How big is the Rfswitch PCB?
It measures 87.5 × 86.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rfswitch use?
58 parts, built around the HLK-PM01, SFH6916 and 431KD10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rfswitch KiCad files?
From the jypma/AvrLibDemo repository on GitHub, at the commit this page was made from: the board is apps/rfswitch/hardware/rfswitch.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rfswitch design in my own project?
Its repository states no licence, so its author keeps all rights: ask jypma before reusing the design.