Skip to the content
2 layers43.5 × 14 mmUSB PD Sink Controller, the printed circuit board in 3D

USB PD Sink Controller

Justinorange/PCB-Compilation

A collection of custom PCB designs, prototypes, and lab projects built for research and experimentation.

Size
43.5 × 14 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
28
Pads
113
Tracks, vias
193, 13
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Oct 2026
Updated
7 Nov 2026

Overview

USB PD Sink Controller is an open-source printed circuit board by Justinorange, from the Justinorange/PCB-Compilation repository on GitHub. It is a 2-layer board of 43.5 × 14 mm with 26 parts on 28 nets, routed with 193 tracks and 13 vias.

It is built around the STL6P3LLH6, ESDA25P35-1U1M and ESDA25W. Its parts include 9 resistors, 6 capacitors, 5 diodes, 3 ICs and 3 connectors. It belongs with the power boards of this library.

Main components

3

README

README.md

PCB-Compilation

A collection of custom PCB designs, prototypes, and lab projects built for research and experimentation.

Relay Control Board

A robust relay control and safety management board designed for hardware kill switching, power distribution, and status monitoring.

Relay Control Board Relay Control Board Schematic

Key Features:

  • Relay Outputs: Features 7 relay outputs with selectable 12V and MCU-level voltage control options, protected by a fuse and TVS diode.
  • Kill & Safety System:
    • 6 input signals with individual red status LEDs to monitor when a kill state is active.
    • 2 dedicated inputs for manual override (enables the yellow status indicator; overridden by the red kill state).
    • Active high/low configuration jumpers for flexible input/output logic.
    • Hardware override jumper to unkill the system.
  • Light Tower Status Indicators: Built using 0803 SMD LEDs for clean labeling and visual feedback:
    • Enable
    • Red: Kill enabled
    • Yellow: Manual enable
    • Green: Autonomous / default operation

View the project source and design files on GitHub.

Air Quality Sensor Breakout Boards

I am building a set of sensor breakout boards that will eventually be combined into a single air quality sensing PCB. These boards are still in progress, and I am finishing the analog sensor boards before moving on to the digital ones.

Hydrogen sensor formaldehyde sensor CO sensor Alcohol sensor

These breakout boards were made for the Machine Intelligence Laboratory (MIL) and are part of a larger integrated sensing platform. View the breakout designs on GitHub.

STUSB 4500 Controller

The STUSB 4500 controller is one of the more complicated PCBs I have made, largely due to the use of USB C protocols and having to solder it by hand.

STUSB 4500 controller

This board was made for FOCUS Lab last year and represents a more complex design in the collection. View the project source on GitHub.

Flashlight Project

This was a quick and fun project to build two flashlights that produce over 20,000 lumens each while keeping the cost as low as possible. The total cost for both was approximately $50. (I also just wanted to make a single sided aluminum PCB).

flashlight PCB Design Flashbang

View the repository and design files on GitHub.

Project Summary

This repository highlights a diverse range of custom PCB projects, including modular air quality and hydrogen sensor systems, a comprehensive relay control board with hardware safety features, research-focused USB-C power controllers, and high-output lighting builds.

Parts

26
QtyValueFootprintReferences
41μFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2, C3, C4, C5
21kRResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2, R6
24.7kRResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR8, R10
2DDiode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolderD3, D5
2ESDA25P35-1U1MST_1610:ST_1610D1, D4
2STL6P3LLH6STL6P3LLH6:POWERFLAT_3P3X3P3_STM2U2, U3
1100RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5
1100kRResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4
1100nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC6
110kRResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR7
122kRResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3
14.7 μFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1
1470RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
1ESDA25WST_SOT323-3L:ST_SOT323-3LD2
1JST_01x02_SocketConnector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_HorizontalJ2
1JST_01x05_SocketConnector_JST:JST_XH_S5B-XH-A_1x05_P2.50mm_HorizontalJ3
1STUSB4500QTRPackage_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mmU1
1USB_C_Receptacle_PowerOnly_6PConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ1

More from Justinorange/PCB-Compilation

2
  • 2 layers74 × 62 mmRelay Board, the printed circuit board in 3D

    Relay Board

    Justinorange/PCB-Compilation

    A collection of custom PCB designs, prototypes, and lab projects built for research and experimentation.

    132 parts
  • 2 layers79.3 × 52.5 mmFlashlight, the printed circuit board in 3D

    Flashlight

    Justinorange/PCB-Compilation

    A collection of custom PCB designs, prototypes, and lab projects built for research and experimentation.

    10 parts

Similar boards

  • 2 layers120 × 100 mmUsb pd pico controller, the printed circuit board in 3D

    Usb pd pico controller

    flummer/sao-wall

    Design for a SAO display PCB, power and control board

    64 parts2CC-BY-SA-4.0
  • 4 layers105 × 65 mmFT2D PD20V 12V5 3A 原型板, the printed circuit board in 3D

    FT2D PD20V 12V5 3A 原型板

    Accelerator6666/Yaesu-FT2D-USBC-charge

    检查日期:2026-10-26;KiCad 10.0.7;目标板厂:嘉立创 JLCPCB;目标工艺:4 层 PCB + SMT 代贴片。

    58 parts
  • 2 layers92 × 50 mmHw1, the printed circuit board in 3D

    Hw1

    stanciugabriel/overture-pcb

    PCB Design made in KiCad for my automatic syringe pump project

    65 parts
  • 4 layers94.9 × 34.6 mmUSB C PD Power Supply Board, the printed circuit board in 3D

    USB C PD Power Supply Board

    Suman-Gayen/USB-C-PD-Power-Supply-Board

    Design a custom pcb for USB-C PD Power Supply Board

    71 parts
  • 2 layersNanosaur NX shield, the printed circuit board in 3D

    Nanosaur NX shield

    rnanosaur/nanosaur-NX-shield

    🦸 A nanosaur NX, need a super shield. The Nanosaur NX shield is here!

    28 parts1
  • 4 layers25.4 × 25.4 mmSTUSB4500 Breakout, the printed circuit board in 3D

    STUSB4500 Breakout

    makeristic/STUSB4500_Breakout

    KiCad USB-C Power Delivery sink breakout using STUSB4500, with STEMMA QT I2C, screw-terminal output and RGB indication. Work in progress.

    34 partsCC-BY-4.0
  • 2 layers54.9 × 58.4 mmIR Digipot, the printed circuit board in 3D

    IR Digipot

    sergeyvfx/IR-Volume-Control

    Digipot volume control using IR controller

    134 partsMIT
  • 2 layers80 × 75 mmUsb pd, the printed circuit board in 3D

    Usb pd

    Chase-Hicks/hardware-design

    project files and documentation for pcb design

    121 parts

Questions

How big is the USB PD Sink Controller PCB?

It measures 43.5 × 14 mm and has 2 copper layers, 1.6 mm thick.

What parts does the USB PD Sink Controller use?

26 parts, built around the STL6P3LLH6, ESDA25P35-1U1M and ESDA25W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the USB PD Sink Controller KiCad files?

From the Justinorange/PCB-Compilation repository on GitHub, at the commit this page was made from: the board is ST-USB4500/USB_PD_Sink_Controller.kicad_pcb and its schematic Flashlight/Flashlight.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the USB PD Sink Controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask Justinorange before reusing the design.