Skip to the content
2 layers74 × 62 mmRelay Board, the printed circuit board in 3D

A collection of custom PCB designs, prototypes, and lab projects built for research and experimentation.

Size
74 × 62 mm
Copper layers
2
Thickness
1.6 mm
Parts
132
Nets
74
Pads
342
Tracks, vias
896, 59
Pours
18
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Oct 2026
Updated
7 Nov 2026

Overview

Relay Board is an open-source printed circuit board by Justinorange, from the Justinorange/PCB-Compilation repository on GitHub. It is a 2-layer board of 74 × 62 mm with 132 parts on 74 nets, routed with 896 tracks and 59 vias.

It is built around the 74LVC1G86Z, 74LVC1G11GW and B5819W-TP. Its parts include 26 resistors, 20 diodes, 18 connectors, 15 capacitors and 15 ICs. It belongs with the home automation and IoT boards of this library.

Main components

3

README

README.md

PCB-Compilation

A collection of custom PCB designs, prototypes, and lab projects built for research and experimentation.

Relay Control Board

A robust relay control and safety management board designed for hardware kill switching, power distribution, and status monitoring.

Relay Control Board Relay Control Board Schematic

Key Features:

  • Relay Outputs: Features 7 relay outputs with selectable 12V and MCU-level voltage control options, protected by a fuse and TVS diode.
  • Kill & Safety System:
    • 6 input signals with individual red status LEDs to monitor when a kill state is active.
    • 2 dedicated inputs for manual override (enables the yellow status indicator; overridden by the red kill state).
    • Active high/low configuration jumpers for flexible input/output logic.
    • Hardware override jumper to unkill the system.
  • Light Tower Status Indicators: Built using 0803 SMD LEDs for clean labeling and visual feedback:
    • Enable
    • Red: Kill enabled
    • Yellow: Manual enable
    • Green: Autonomous / default operation

View the project source and design files on GitHub.

Air Quality Sensor Breakout Boards

I am building a set of sensor breakout boards that will eventually be combined into a single air quality sensing PCB. These boards are still in progress, and I am finishing the analog sensor boards before moving on to the digital ones.

Hydrogen sensor formaldehyde sensor CO sensor Alcohol sensor

These breakout boards were made for the Machine Intelligence Laboratory (MIL) and are part of a larger integrated sensing platform. View the breakout designs on GitHub.

STUSB 4500 Controller

The STUSB 4500 controller is one of the more complicated PCBs I have made, largely due to the use of USB C protocols and having to solder it by hand.

STUSB 4500 controller

This board was made for FOCUS Lab last year and represents a more complex design in the collection. View the project source on GitHub.

Flashlight Project

This was a quick and fun project to build two flashlights that produce over 20,000 lumens each while keeping the cost as low as possible. The total cost for both was approximately $50. (I also just wanted to make a single sided aluminum PCB).

flashlight PCB Design Flashbang

View the repository and design files on GitHub.

Project Summary

This repository highlights a diverse range of custom PCB projects, including modular air quality and hydrogen sensor systems, a comprehensive relay control board with hardware safety features, research-focused USB-C power controllers, and high-output lighting builds.

Parts

132
QtyValueFootprintReferences
22Jumper_3_Bridged12Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJP1, JP2, JP3, JP10, JP11, JP12, JP13, JP14, JP15, JP16, JP17, JP18, JP19, JP20, JP21, JP22 +6
150.1uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15
15Conn_01x02_SocketConnector_Molex:Molex_Micro-Latch_53253-0270_1x02_P2.00mm_VerticalJ1, J2, J3, J4, J5, J6, J10, J11, J12, J13, J14, J15, J16, J17, J18
1310kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2, R3, R4, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26
11220Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16
1074LVC1G86Package_TO_SOT_SMD:Texas_R-PDSO-G5_DCK-5U1, U3, U8, U9, U10, U11, U12, U13, U14, U15
9Red LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD11, D12, D13, D14, D15, D16, D17, D18, D19
7D_TVSDiode_SMD:D_SMBD1, D2, D3, D4, D5, D6, D20
7PMOS - PMF170XPPackage_TO_SOT_SMD:SOT-323_SC-70_HandsolderingQ3, Q4, Q5, Q6, Q7, Q8, Q9
574LVC1G11Package_TO_SOT_SMD:SOT-23-6_HandsolderingU2, U4, U5, U6, U7
3Conn_01x03_SocketConnector_Molex:Molex_Micro-Latch_53253-0370_1x03_P2.00mm_VerticalJ7, J8, J9
21kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R5
2B5819W-TPDiode_SMD:D_SOD-123D8, D21
2Fuse 0.25 AFuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolderF1, F2
2NMOS - BSS138Package_TO_SOT_SMD:SC-59_HandsolderingQ1, Q2
1Green LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD9
1LOGOLOGOG***
1Yellow LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD10

The 128 most common of 132 parts.

More from Justinorange/PCB-Compilation

2
  • 2 layers43.5 × 14 mmUSB PD Sink Controller, the printed circuit board in 3D

    USB PD Sink Controller

    Justinorange/PCB-Compilation

    A collection of custom PCB designs, prototypes, and lab projects built for research and experimentation.

    26 parts
  • 2 layers79.3 × 52.5 mmFlashlight, the printed circuit board in 3D

    Flashlight

    Justinorange/PCB-Compilation

    A collection of custom PCB designs, prototypes, and lab projects built for research and experimentation.

    10 parts

Similar boards

  • 2 layers131.9 × 164.6 mmCft alu, the printed circuit board in 3D

    Cft alu

    alexiosc/cft

    The CFT homebrew minicomputer

    138 parts6GPL-3.0
  • 4 layers42 × 50 mmSimpleFC G, the printed circuit board in 3D

    SimpleFC G

    wangyeee/OpenHardware

    Collections of hardware design related to my drone project.

    134 parts10BSD-3-Clause
  • 2 layersOpensync, the printed circuit board in 3D

    Opensync

    ErichZimmer/OpenSync

    An open source synchronizer for velocimetry of fluids.

    230 parts4CERN-OHL-S-2.0
  • 4 layers33 × 12.7 mmDigitaladapter, the printed circuit board in 3D

    Digitaladapter

    c0pperdragon/RGBtoHDMI_Accessories

    Mechanical switchbox to select one of two 6-pin inputs to be forwarded to one Analog RGBtoHDMI.

    39 parts2
  • 4 layers395 × 122.5 mmAtat-1800, the printed circuit board in 3D

    Atat-1800

    earth75/atat-1800

    A compact keyboard layout with the numpad on the right hand side

    342 parts2
  • 2 layers74.5 × 95.8 mmCamera flash, the printed circuit board in 3D

    Camera flash

    Jana-Marie/Zoetrope-Flash

    Zoetrope-Flash is a flash built for machine vision. It is based on the LED pcb of Enlightened Otter.

    95 parts2
  • 2 layers88.8 × 76 mmArch Bridge, the printed circuit board in 3D

    Arch Bridge

    SeraphimlabsLLC/Arch_Bridge

    DCC-EX to Loconet accessory bus interface

    102 parts2AGPL-3.0
  • 4 layers100 × 100 mmAlu, the printed circuit board in 3D

    Alu

    bcrist/vera

    Homebrew discrete logic CPU

    102 parts1MIT

Questions

How big is the Relay Board PCB?

It measures 74 × 62 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Relay Board use?

132 parts, built around the 74LVC1G86Z, 74LVC1G11GW and B5819W-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Relay Board KiCad files?

From the Justinorange/PCB-Compilation repository on GitHub, at the commit this page was made from: the board is Relay-Board/Relay-Board.kicad_pcb and its schematic Flashlight/Flashlight.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Relay Board design in my own project?

Its repository states no licence, so its author keeps all rights: ask Justinorange before reusing the design.