
Sequencer
zueblin/Polaron
A DIY drum machine for the teensy microcontroller (hardware / software)

Libensjunot PCB is an open-source printed circuit board by JunotLibens, from the JunotLibens/EES_2526_PCB_DESIGN repository on GitHub. It is a 4-layer board of 72 × 50.5 mm with 50 parts on 23 nets, routed with 287 tracks and 37 vias.
It is built around the ADS1115IDGSR and SJ-3523-SMT-TR. Its parts include 18 capacitors, 10 resistors, 6 ICs and 3 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C11, C13, C14, C15, C16, C18 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7 |
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C9, C10 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R6 |
| 3 | OPA323IDCKR | SamacSys_Parts:SOT65P210X110-5N | IC3, IC4, IC5 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric | C12, C17 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
| 2 | 330n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10 |
| 1 | 1.02k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 33k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 660n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 820k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | ADS1115IDGSR | SamacSys_Parts:SOP50P490X110-10N | IC6 |
| 1 | BLM21BD751SZ1D | SamacSys_Parts:BLM21BB050SH1D | FL1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | INA823DT | SamacSys_Parts:SOIC127P600X175-8N | IC2 |
| 1 | MCP1700-3302E_TO | SamacSys_Parts:MCP17003302ETO | IC1 |
| 1 | SJ-3523-SMT-TR | SamacSys_Parts:SJ3523SMTTR | J2 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP2 |

zueblin/Polaron
A DIY drum machine for the teensy microcontroller (hardware / software)



pa3gsb/Radioberry-2.x-extensions
Hardware extensions to the Radioberry Ham Radio


wiretap-retro/Gameboy-DMG-Headphone-Jack-PCB
A replacement Gameboy DMG headphone jack PCB utilizing all newly manufactured parts -- yes, even the jack.


inceptionev/PlasmaTransformer
This project mainly focuses on creating a driver and 3D-printed support structure that allows for safe continuous operation of a plasma toroid.
It measures 72 × 50.5 mm and has 4 copper layers, 1.6 mm thick.
50 parts, built around the ADS1115IDGSR and SJ-3523-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JunotLibens/EES_2526_PCB_DESIGN repository on GitHub, at the commit this page was made from: the board is Libensjunot_PCB/Libensjunot_PCB.kicad_pcb and its schematic Libensjunot_PCB/ADC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JunotLibens before reusing the design.