

Sequencer
A DIY drum machine for the teensy microcontroller (hardware / software)
- Size
- 157.5 × 116 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 107
- Nets
- 78
- Pads
- 447
- Tracks, vias
- 722, 56
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 Sep 2018
- Updated
- 5 Sep 2020
Overview
Sequencer is an open-source printed circuit board by zueblin, from the zueblin/Polaron repository on GitHub. It is a 2-layer board of 157.5 × 116 mm with 107 parts on 78 nets, routed with 722 tracks and 56 vias.
It is built around the 74HC165N and SJ-3523-SMT-TR. Its parts include 32 resistors, 31 diodes, 30 switches, 5 ICs and 2 capacitors. It belongs with the audio and music boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
274HC165N
DIP-16-40℃~+105℃ 15ns@6V,50pF 2V~6V 5.2mA 500mW 61MHz 74HC Series 8 Asynchronous parallel load function Complementary Parallel-to-Serial DIP-16 Shift Registers ROHSHGSEMIShift RegistersSJ-3523-SMT-TR
SMD-25℃~+85℃ 12V 19mm 1A 3.5mm Headphone Jack 5mm 9mm Black Brass、Copper alloy Silver Surface Mount TRS SMD Audio Connectors ROHSCUIAudio Connectors (Headphones)
README
Hardware/readme.mdParts
107| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | SWITCH-MOMENTARY-2PTH | sequencer:TACTILE-PTH | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +14 |
| 30 | ~ | LEDs:LED_WS2812B-PLCC4 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +14 |
| 16 | 270 | modules:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal_noSilkscreen | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 14 | 270 | Resistors_SMD:R_1206_HandSoldering | R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30 |
| 4 | 74HC165N | sequencer:DIL16 | IC1, IC2, IC3, IC4 |
| 2 | 10k | Resistors_SMD:R_1206_HandSoldering | R31, R32 |
| 2 | 2.2uF | Capacitors_SMD:C_1206_HandSoldering | C1, C2 |
| 2 | POT | Potentiometers:Potentiometer_Alps_RK09K_Horizontal | RV1, RV2 |
| 2 | SJ-3523-SMT-TR | SJ-3523-SMT-TR:CUI_SJ-3523-SMT-TR | J1, J2 |
| 1 | 1N4148 | Diodes_THT:D_DO-35_SOD27_P2.54mm_Vertical_AnodeUp | D31 |
| 1 | 2N3904 | TO_SOT_Packages_THT:TO-92_Inline_Wide | Q1 |
| 1 | Teensy3.6 | modules:Teensy35_36_simple | U1 |
The 105 most common of 107 parts.
Similar boards
- 2 layers148.6 × 89.7 mm

- 2 layers100.9 × 62.4 mm

- 4 layers170 × 170 mm

- 4 layers85 × 56 mm

Radioberry LPF V1.3
pa3gsb/Radioberry-2.x-extensions
Hardware extensions to the Radioberry Ham Radio
116 parts24 - 2 layers100 × 100 mm

- 2 layers46.7 × 16.8 mm

GB DMG Pro Headphone PCB
wiretap-retro/Gameboy-DMG-Headphone-Jack-PCB
A replacement Gameboy DMG headphone jack PCB utilizing all newly manufactured parts -- yes, even the jack.
16 parts18CC0-1.0 - 4 layers25.4 × 25.4 mm

- 2 layers90 × 90 mm

PlasmaTransformer
inceptionev/PlasmaTransformer
This project mainly focuses on creating a driver and 3D-printed support structure that allows for safe continuous operation of a plasma toroid.
86 parts14
Questions
How big is the Sequencer PCB?
It measures 157.5 × 116 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sequencer use?
107 parts, built around the 74HC165N and SJ-3523-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sequencer KiCad files?
From the zueblin/Polaron repository on GitHub, at the commit this page was made from: the board is Hardware/sequencer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sequencer design in my own project?
Its repository states no licence, so its author keeps all rights: ask zueblin before reusing the design.