
Display mit raspiZ
jstrebel/frontpanel_vigor
Bedienung: Entwurf der das Bedieninterface der Kotrollerbox erklärt

Bedienung: Entwurf der das Bedieninterface der Kotrollerbox erklärt
Vigor22 C is an open-source printed circuit board by jstrebel, from the jstrebel/frontpanel_vigor repository on GitHub. It is a 2-layer board of 122.9 × 70 mm with 107 parts on 109 nets, routed with 1,026 tracks and 204 vias.
It is built around the LTV-847 and BSS138. Its parts include 51 resistors, 15 capacitors, 15 diodes, 7 connectors and 6 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Bedienung: Entwurf der das Bedieninterface der Kotrollerbox erklärt
Schemas:
Testcode: Beispiel lesen der Tastatur input mit dem Arduino
TFT display: Für die Anzeigen wird ein gut Dokumentierte Library verwendet. Doku auf: https://github.com/gavinlyonsrepo/Display_Lib_RPI
Das ist der Code welcher der Entwickler für mich machte. Dieser Code ist mit dem Raspi 4 getestet. https://github.com/gavinlyonsrepo/ST7789_TFT_RPI/releases
Gavin hat die Beschreibung upgedatet, Grund war, dass der code den wir verwenden eine andere Library verwendet. https://github.com/gavinlyonsrepo/ST7789_TFT_RPI
<<<<<<< Updated upstream <<<<<<< Updated upstream BEM: werde dieses Repository weiter organisieren und aufräumen
curl -sL http://www.airspayce.com/mikem/bcm2835/bcm2835-1.75.tar.gz | tar xz
./configure
make
sudo make check
sudo make installhttps://fleetstack.io/blog/redis-on-raspberry-pi-setup
sudo apt install redis-server -yFalls wenig RAM Memorybegrenzung:
sudo nano /etc/redis/redis.conf
maxmemory 100mb maxmemory-policy allkeys-lruHinzufügen zum Autostart und starten von redis
sudo systemctl enable redis-server
sudo systemctl start redis-serverTesten:
redis-cli
set testkey "hello"
get testkeysudo apt-get install libhiredis-dev======= BEM: Werde dieses Repository weiter organisieren und aufräumen
Stashed changes ======= BEM: Werde dieses Repository weiter organisieren und aufräumen Stashed changes
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 47nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 12 | 470 | Resistor_SMD:R_0805_2012Metric | R15, R16, R17, R18, R31, R32, R33, R34, R35, R36, R37, R38 |
| 12 | 560 | Resistor_SMD:R_0805_2012Metric | R5, R6, R7, R8, R10, R39, R40, R41, R42, R47, R48, R51 |
| 8 | 1k | Resistor_SMD:R_0805_2012Metric | R21, R22, R23, R24, R43, R44, R45, R46 |
| 8 | 2.2k | Resistor_SMD:R_0805_2012Metric | R19, R20, R25, R26, R27, R28, R29, R30 |
| 8 | D | Diode_SMD:D_SOD-323 | D3, D4, D5, D6, D7, D8, D9, D10 |
| 7 | 1.2k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R9, R49, R50 |
| 7 | LED | LED_SMD:LED_1206_3216Metric_ReverseMount_Hole1.8x2.4mm | D1, D11, D12, D13, D14, D15, D16 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R11, R12, R13, R14 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 4 | Q_PNP_BEC | Package_TO_SOT_THT:TO-92 | Q3, Q4, Q5, Q6 |
| 4 | SW_Push_SPDT | Symbol:wuert_WS-SLTV | SW1, SW2, SW3, SW4 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | LTV-847 | Package_SO:SOIC254P1016X460-16N | U3, U4 |
| 2 | spare | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J2, J3 |
| 1 | 12V Power | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | 2.2uF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C16 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Handsteuerung | vigor:CONN_B12B-XH-JST | J6 |
| 1 | I2C | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | LM7810-10V | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | Motor 1 | vigor:CONN_B6B-XH-JST | J5 |
| 1 | Motor 2 | vigor:CONN_B6B-XH-JST | J4 |
| 1 | ~ | vigor:MCP2515 | U1 |

jstrebel/frontpanel_vigor
Bedienung: Entwurf der das Bedieninterface der Kotrollerbox erklärt

tnn85/MPCNC-Nano-Estlcam-Shield
Ein CNC Shield für die MPCNC in Verwendung mit Estlcam

ftl/atu100wifi
A wifi adapter device for David Fainitski's ATU-100 antenna tuner (https://github.com/Dfinitski/N7DDC-ATU-100-mini-and-extended-boards)

pstimpel/waveformgenerator
A waveform generator based on XR2206 and Arduino



411568/Atmega8_FM_radio
Simple FM radio based on Atmega8 and TEA5767 module

JhonVelasquez/Embedded_system_Synchronize_Plant
Project of a embedded system that synchronizes signals in a plant. There is electronic (PCB) and software design (FreeRTOS for STM32F7).

It measures 122.9 × 70 mm and has 2 copper layers, 1.6 mm thick.
107 parts, built around the LTV-847 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jstrebel/frontpanel_vigor repository on GitHub, at the commit this page was made from: the board is KiCAD/vigor22_C/vigor22_C.kicad_pcb and its schematic KiCAD/display_mit_raspiZ/CAN_.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jstrebel before reusing the design.