Skip to the content
4 layers59.9 × 57.5 mmMcu test board, the printed circuit board in 3D

Mcu test board

jrseti/pcbs

Various printed circuit board projects

Size
59.9 × 57.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
62
Nets
55
Pads
211
Tracks, vias
359, 126
Pours
5
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
29 Mar 2026
Updated
4 Aug 2026

Overview

Mcu test board is an open-source printed circuit board by jrseti, from the jrseti/pcbs repository on GitHub, published under the MIT licence. It is a 4-layer board of 59.9 × 57.5 mm with 62 parts on 55 nets, routed with 359 tracks and 126 vias.

It is built around the LTV-817S-TA1, LD39050PU33R and LTV-827S-TA1, with the LTV-847S, TPESD0402G05V and KF2EDGR-2.54-2P among its other parts. Its parts include 22 resistors, 11 diodes, 10 capacitors, 7 connectors and 6 ICs. It belongs with the STM32 boards of this library.

Main components

12

README

dishy1pi/README.md

Dishy1Pi Hardware

The hardware part of the Dishy1Pi project is a Raspberry Pi Hat board which interfaces the Raspberry Pi GPIO pins with the satellite dish motor controllers, encoders, and various sensors. An important aspect of this board is that the Raspberry Pi is optically isolated from the hardware connected to the satellite dish.

Although this project is tailored to controlling a satellite dish, it can also be used for controlling other motor control systems that require isolation and encoder feedback.

Parts Library

The PCB will be assembled by JCLPCB. The project will require parts number identification to be compatible with LCSC part numbers. See Library README

Parts

62
QtyValueFootprintReferences
8TPESD0402G05VMyParts:D0402-BID2, D3, D4, D5, D6, D7, D8, D9
6100nFPCM_JLCPCB:C_0402C1, C2, C3, C6, C10, C12
54.7kΩPCM_JLCPCB:R_0603R7, R8, R18, R19, R20
5470ΩPCM_JLCPCB:R_0402R13, R14, R15, R16, R17
4MountingHole_2.7mm_M2.5_ISO14580MountingHole:MountingHole_2.7mm_M2.5_ISO14580M1, M1, M1, M1
31kΩPCM_JLCPCB:R_0402R10, R11, R12
347kΩPCM_JLCPCB:R_0402R21, R22, R23
210kΩPCM_JLCPCB:R_0402R1, R25
21uFPCM_JLCPCB:C_0402C9, C11
24.7kΩPCM_JLCPCB:R_0402R3, R5
26.8pFPCM_JLCPCB:C_0402C7, C8
2KF2EDGR-2.54-2PMyParts:CONN-TH_P2.54_KF2EDGR-2.54-2PCN1, CN2
2LTST-S270KGKTMyParts:LED-SMD_L1.7-W0.6-RDLED1, LED2
2LTV-817S-TA1MyParts:OPTO-SMD-4_L4.6-W6.5-P2.54-LS10.3-BLU6, U7
1330ΩPCM_JLCPCB:R_0402R24
1620ΩPCM_JLCPCB:R_0603R9
1Conn_ARM_SWD_TagConnect_TC2030-NLConnector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_VerticalJ1
1DSHP04TSGERMyParts:SW-SMD_8P-L6.7-W5.4-P1.27-LS8.4SW1
1KF2EDGR-2.54-4PMyParts:CONN-TH_4P-P2.54_KF2EDGR-2.54-4PCN4
1KF2EDGR-2.54-6PMyParts:CONN-TH_KF2EDGR-2.54-6PCN8
1KF2EDGR-2.54-9PMyParts:CONN-TH_9P-P2.54_KF2EDGR-2.54-9PCN7
1LD39050PU33RMyParts:DFN-6_L3.0-W3.0-P0.95-LS3.1-TL-EPU2
1LTV-827S-TA1MyParts:SMD-8_L9.8-W6.6-P2.54-LS10.3-BLU5
1LTV-847SMyParts:SMD-16_L20.0-W6.5-P2.54-LS10.2-BLU3
1NX2016SA-16MHZ-EXS00A-CS07826MyParts:CRYSTAL-SMD_4P-L2.0-W1.6-BLX1
1SM04B-SRSS-TB (LF)(SN)MyParts:CONN-SMD_4P-P1.00_SM04B-SRSS-TB-LF-SNCN3
1STM32G431KBT6TRMyParts:LQFP-32_L7.0-W7.0-P0.80-LS9.0-BLU4
1STPS1L30AMyParts:SMA_L4.3-W2.6-LS5.2-RDD1

More from jrseti/pcbs

3
  • 4 layers94.6 × 69.3 mmDishyPi1, the printed circuit board in 3D

    DishyPi1

    jrseti/pcbs

    Various printed circuit board projects

    106 partsMIT
  • 4 layers24.6 × 33.1 mmPower supply2, the printed circuit board in 3D

    Power supply2

    jrseti/pcbs

    Various printed circuit board projects

    25 partsMIT

Similar boards

  • 4 layers140 × 100 mmRcm dish controller, the printed circuit board in 3D

    Rcm dish controller

    jrseti/Dish

    Simple controller with toggle switches to move the dish motors

    314 partsCC0-1.0
  • 4 layers150 × 100 mmCm4-robo controller, the printed circuit board in 3D

    Cm4-robo controller

    jrseti/roboclaw-cm4-dc-dish-controller

    Satellite dish controller using a ROBOCLAW-2X15A-OEM controlled by a Raspberry Pi CM4 module. Powered by DC battery.

    292 partsMIT
  • 2 layers160 × 110 mmAcquedotto test v4 finale, the printed circuit board in 3D

    Acquedotto test v4 finale

    igorilla666/water-controller

    Scheda di controllo basata sul modulo Waveshare ESP32-S3-ETH, con ingressi sensore, RS-485, pilotaggio rele, buzzer e alimentazione/protezioni dedicate.

    139 parts1CERN-OHL-S-2.0
  • 4 layers99.8 × 115 mmIgnitionController, the printed circuit board in 3D

    IgnitionController

    MiroslavMitrovic/IgnitionController_STM32

    Ignition controller implementation for 4T Single Cylinder/V-Twin motorcycle.

    226 partsGPL-3.0
  • 4 layers24.6 × 33.1 mmPower supply2, the printed circuit board in 3D

    Power supply2

    jrseti/dishy1pi

    Satellite dish motor control for Raspberry Pi, hardware and software

    21 partsMIT
  • 2 layers75 × 70 mmIPicoV5 Panelized, the printed circuit board in 3D

    IPicoV5 Panelized

    MiniProjectDIY/iPico

    RP2350 based UF2 hardware security key

    228 parts5CC0-1.0
  • 4 layers142 × 119.7 mmQMTech MiSTeX, the printed circuit board in 3D

    QMTech MiSTeX

    MiSTeX-devel/MiSTeX-hardware

    Hardware for MiSTeX

    247 parts73
  • 6 layers100 × 100 mmAi vision, the printed circuit board in 3D

    Ai vision

    embeddedci-com/pcb-trace-length-analyzer

    Two of them, and the difference between them is the point.

    370 parts3Apache-2.0

Questions

How big is the Mcu test board PCB?

It measures 59.9 × 57.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Mcu test board use?

62 parts, built around the LTV-817S-TA1, LD39050PU33R, LTV-827S-TA1 and LTV-847S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mcu test board KiCad files?

From the jrseti/pcbs repository on GitHub, at the commit this page was made from: the board is mcu_test_board/mcu_test_board.kicad_pcb and its schematic dishy1pi/DishyPi1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mcu test board design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).