
JPL MP3 circuit
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Files for ESP32 based MP3 player
JPL.mp3 is an open-source printed circuit board by jpetkauskas, from the jpetkauskas/JPL.mp3 repository on GitHub. It is a 4-layer board of 40 × 100 mm with 72 parts on 62 nets, routed with 499 tracks and 50 vias.
It is built around the ESP32-S3-WROOM-1-N8, MAX1811ESA+ and PCM5102APW, with the 1N5819WS and BSS138 among its other parts. Its parts include 22 capacitors, 19 resistors, 5 connectors, 4 ICs and 2 diodes. It belongs with the ESP32 boards of this library.
The iPod endgame does not exist.
An iPod-esque mp3 player based on the ESP32 platform.
See YouTube video and Blog post for more details!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10K | Resistor_SMD:R_0603_1608Metric | R3, R8, R9, R10, R11, R13, R14, R15, R16, R17, R18, R19 |
| 9 | TestPoint_Pad_D2.0mm | TestPoint:TestPoint_Pad_D2.0mm | COMA, COMB, ENCA, ENCB, SW1, SW2, SW3, SW4, SW5 |
| 5 | .1uF | Capacitor_SMD:C_0603_1608Metric | C5, C9, C15, C19, C21 |
| 5 | 10uF | Capacitor_SMD:C_0603_1608Metric | C6, C10, C16, C20, C23 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C11, C13 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 1N5819WS | Diode_SMD:D_SOD-323 | D1, D2 |
| 2 | 2.2nF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C17, C18 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 | SW1, SW2 |
| 1 | .47uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 10 nF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 2.2 uF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 4.7 uF | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 47uF | Capacitor_SMD:C_1210_3225Metric | C2 |
| 1 | AudioJack3 | Connector_Audio:Jack_3.5mm_KoreanHropartsElec_PJ-320D-4A_Horizontal | J5 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_B3U-1000P | BOOT1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | Conn_01x12 | Connector_FFC-FPC:TE_1-1734839-2_1x12-1MP_P0.5mm_Horizontal | J4 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U1 |
| 1 | HOLD | Button_Switch_SMD:SW_SPDT_PCM12 | SL2 |
| 1 | LOGO | footprints:JPL | G*** |
| 1 | LT1963AxST-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | MAX1811 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Molex_104031-0811 | J1 |
| 1 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_B3U-1000P | RST1 |
| 1 | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | BAT |
| 1 | USB_C | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J2 |
| 1 | ~ | ANORotaryEncoder:ANO Rotary Encoder | Enc1 |
The 71 most common of 72 parts.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

kitspace/component_tester
A keychain version of the Mikrontroller.net AVR component tester

cbaurtx/RetroBox
RetroBox is an internet radio using an ESP32-S3 system on a chip


boumierjaptiste/2025_PSE_B6_gsailly_bjoumier
Projet de montre connectée IOT3-S6 en binôme

jonnydyer/rocket_ejection
Telemetry recorder and ejection driver for model rockets


It measures 40 × 100 mm and has 4 copper layers, 1 mm thick.
72 parts, built around the ESP32-S3-WROOM-1-N8, MAX1811ESA+, PCM5102APW and 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jpetkauskas/JPL.mp3 repository on GitHub, at the commit this page was made from: the board is eda/JPL.mp3.kicad_pcb and its schematic eda/JPL.mp3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jpetkauskas before reusing the design.