
Panel
jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

This Repository is a collection of NRF5x boards.
Panel is an open-source printed circuit board by jpconstantineau, from the jpconstantineau/NRF52-Board repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 170 × 91 mm with 126 parts on 67 nets, routed with 906 tracks and 162 vias.
It is built around the CH340C, E73-2G4M04S1B and AP2112K-3.3, with the TP4056, B5819W and SI2301CDS-T1-GE3 among its other parts. Its parts include 31 connectors, 23 diodes, 18 switches, 12 capacitors and 9 resistors.
This Repository is a collection of NRF5x boards.
TODO: remap folders...
| Hardware Name | PCB Folder name | Processor | Firmware | Circuit Diagram | Build Guide |
|---|---|---|---|---|---|
| LiPo Charger 3.3V Regulator | Batt_Charger_Regulator | n/a | n/a | Build Guide | |
| CR2032 Coin Cell Holder | Battery | n/a | n/a | Build Guide | |
| Mini Switch | MiniSwitch | n/a | n/a | Build Guide | |
| BlueMicro V1.x | EByte_E73 | NRF52832 | BlueMicro_BLE | Build Guide | |
| BlueMicro V2.0b | EByte_E73_Batt | NRF52832 | BlueMicro_BLE | Build Guide | |
| BlueMicro V2.0c | EByte_E73_Batt_ErgoTravel | NRF52832 | BlueMicro_BLE | Build Guide | |
| 4X4 backpack | EByte_E73_Batt_Macro_4x4 | NRF52832 | BlueMicro_BLE | Build Guide | |
| BlueMicro Tester | EByte_E73_tester | NRF52832 | Arduino | ||
| BlueMicro51 | YJ-14015 | NRF51822 | tbd |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | CHERRY_MX | footprints:MX-Alps-Choc-1U | S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S13, S14, S15, S16 |
| 16 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J1, J2, J2, J3, J3, J4, J4, J5, J5, J6, J6, J7, J7, J8, J8 |
| 16 | DIODE | footprints:D_SOD123_axial-dual | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 12 | Conn_01x01 | MountingHole:MountingHole_2.2mm_M2_ISO7380 | J11, J11, J12, J12, J13, J13, J14, J14, J15, J15, J16, J16 |
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C6, C7, C9, C10 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C11, C12, C13 |
| 4 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3, R4, R10 |
| 4 | Val** | kbd:HOLE_JLCPCBA | Ref**, Ref**, Ref**, Ref** |
| 3 | 1N4148 | Diode_SMD:D_SOD-123 | D3, D4, D7 |
| 2 | RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D10 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8 |
| 1 | 100pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7 |
| 1 | 10k | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 10uH | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C14 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 2M | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12 |
| 1 | 806k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | B5819W | Diode_SMD:D_SOD-123 | D8 |
| 1 | BLUE | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | Battery_Cell | E73:Keystone_1058_1x2032-CoinCell | BT1 |
| 1 | CH340C | Package_SO:SOP-16_4.4x10.4mm_P1.27mm | U2 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | Conn_02x05_Counter_Clockwise | Connector:Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_Vertical | J9 |
| 1 | E73-2G4M04S | E73:E73-2G4M04S | U1 |
| 1 | RESET | E73:SW_TACT_ALPS_SKQGABE010 | SW2 |
| 1 | SI2301CDS-T1-GE3 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SW_SPDT | E73:SPDT_C128955 | SW1 |
| 1 | TP4056 | Package_SO:SSOP-8_3.95x5.21x3.27mm_P1.27mm | U3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J17 |
The 104 most common of 126 parts.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.

jpconstantineau/NRF52-Board
This Repository is a collection of NRF5x boards.


accelerando-consulting/accelerando_barangaroo
This is a simple breakout board for the eByte E73 module with nrf52832 microcontroller. This board requires minimal parts, in fact it can work with only the module and no other parts.

ehuang2021/drone-fc
A drone flight controller, with multithreaded firmware, and a custom PCB


neilgibsonpinto-art/litewing-65-flight-controller
An ultra-low SWaP-C (Size, Weight, Power, and Cost) monolithic flight computer and decentralized micro-UAV swarm reconnaissance architecture engineered by Neil Gibson Pinto at Sahyadri College of Engineering &…



jonny190/TableLight
A 3D-printable, battery-powered, USB-C rechargeable table lamp in the classic "Poldina" shape - honeycomb disc base, thin stem, down-firing cone shade with a white top - running WLED on an ESP32, with a capacitive touch…
It measures 170 × 91 mm and has 2 copper layers, 1.6 mm thick.
126 parts, built around the CH340C, E73-2G4M04S1B, AP2112K-3.3 and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jpconstantineau/NRF52-Board repository on GitHub, at the commit this page was made from: the board is 4x4_backpack/Panel/panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).