
Stm32 plug'n'play
george-vamvakidis/stm32_3sensor_built
An STM32 implementation with 3 sensors (BMP388, MCU-6050 and TMP112). The communication is implemented through I2C and SPI.

A shield that attaches to the STM32 Nucleo board. The shield holds the gryo-accelerometer and the barometer. It connects the GPS module, magnetometer, MAVLINK, battery sensor and the airspeed sensor. It also holds the pins to connect to the ESCs for the motors and servos.
Nucleo STM32 Flight Controller is an open-source printed circuit board by joz228-rgb, from the joz228-rgb/Flight-Controller-Shield repository on GitHub. It is a 4-layer board of 53 × 56.7 mm with 29 parts on 47 nets, routed with 228 tracks and 26 vias.
It is built around the BMP388 and MPU-6050. Its parts include 16 connectors, 6 capacitors, 2 resistors and 2 ICs. It belongs with the robots and motor control and sensors and measurement boards and the STM32 boards of this library.
These are all of the PCB design files made from KiCAD. It also includes the production file which is used for making PCB orders through JLCPCB or PCBWay
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6 |
| 5 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J7, J8, J9, J10, J11 |
| 3 | 100n | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5 |
| 3 | MountingHole_Pad_MP | MountingHole:MountingHole_3.5mm | H1, H2, H3 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C2, C6 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | CN6, CN7 |
| 1 | .1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | BMP388 | BMP388:PQFN50P200X200X80-10N | U3 |
| 1 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J12 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | CN8 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | CN5 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U1 |

george-vamvakidis/stm32_3sensor_built
An STM32 implementation with 3 sensors (BMP388, MCU-6050 and TMP112). The communication is implemented through I2C and SPI.



rishikesh2715/STM32F7_FC
STM32F722RET6 Based Flight Controller with ICM-42688-P IMU, BMP388 Barometer, and much more!

fdiwth/tvc-drone
This repository contains the documentation, hardware designs, and source code for a Thrust Vector Control (TVC) drone.


MartinVerges/womolin-waterlevel
DIY project to build a smart fuel sensor for RVs or in other projects. It is based on air pressure and is able to measure fresh water as well as grey and black water levels with high precision.

It measures 53 × 56.7 mm and has 4 copper layers, 1.6 mm thick.
29 parts, built around the BMP388 and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the joz228-rgb/Flight-Controller-Shield repository on GitHub, at the commit this page was made from: the board is Nucleo STM32 Flight Controller.kicad_pcb and its schematic Nucleo STM32 Flight Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask joz228-rgb before reusing the design.