Skip to the content
4 layers53 × 56.7 mmNucleo STM32 Flight Controller, the printed circuit board in 3D

Nucleo STM32 Flight Controller

joz228-rgb/Flight-Controller-Shield

A shield that attaches to the STM32 Nucleo board. The shield holds the gryo-accelerometer and the barometer. It connects the GPS module, magnetometer, MAVLINK, battery sensor and the airspeed sensor. It also holds the pins to connect to the ESCs for the motors and servos.

Size
53 × 56.7 mm
Copper layers
4
Thickness
1.6 mm
Parts
29
Nets
47
Pads
125
Tracks, vias
228, 26
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
14 Apr 2026
Updated
14 Apr 2026

Overview

Nucleo STM32 Flight Controller is an open-source printed circuit board by joz228-rgb, from the joz228-rgb/Flight-Controller-Shield repository on GitHub. It is a 4-layer board of 53 × 56.7 mm with 29 parts on 47 nets, routed with 228 tracks and 26 vias.

It is built around the BMP388 and MPU-6050. Its parts include 16 connectors, 6 capacitors, 2 resistors and 2 ICs. It belongs with the robots and motor control and sensors and measurement boards and the STM32 boards of this library.

Main components

2

README

README.md

These are all of the PCB design files made from KiCAD. It also includes the production file which is used for making PCB orders through JLCPCB or PCBWay

Parts

29
QtyValueFootprintReferences
6Conn_01x03Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ1, J2, J3, J4, J5, J6
5Conn_01x04Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ7, J8, J9, J10, J11
3100nCapacitor_SMD:C_0603_1608MetricC3, C4, C5
3MountingHole_Pad_MPMountingHole:MountingHole_3.5mmH1, H2, H3
210uCapacitor_SMD:C_0805_2012MetricC2, C6
24.7kResistor_SMD:R_0603_1608MetricR1, R2
2Conn_01x08_PinConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalCN6, CN7
1.1uCapacitor_SMD:C_0603_1608MetricC1
1BMP388BMP388:PQFN50P200X200X80-10NU3
1Conn_01x02_PinConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ12
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalCN8
1Conn_01x10_PinConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalCN5
1MPU-6050Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mmU1

Similar boards

  • 4 layers48.2 × 37.3 mmStm32 plug'n'play, the printed circuit board in 3D

    Stm32 plug'n'play

    george-vamvakidis/stm32_3sensor_built

    An STM32 implementation with 3 sensors (BMP388, MCU-6050 and TMP112). The communication is implemented through I2C and SPI.

    48 parts3
  • 4 layers37.1 × 43.3 mmIcarus, the printed circuit board in 3D

    Icarus

    nnarain/icarus

    Microquad Flight Controller

    52 parts1
  • 8 layers38.5 × 38.5 mmFlight Controller, the printed circuit board in 3D

    Flight Controller

    rishikesh2715/STM32F7_FC

    STM32F722RET6 Based Flight Controller with ICM-42688-P IMU, BMP388 Barometer, and much more!

    133 parts57MIT
  • 4 layers66.4 × 66.4 mmRera, the printed circuit board in 3D

    Rera

    fdiwth/tvc-drone

    This repository contains the documentation, hardware designs, and source code for a Thrust Vector Control (TVC) drone.

    140 parts34GPL-3.0
  • 4 layers73.4 × 72.7 mmAwatch2, the printed circuit board in 3D

    Awatch2

    jwise/aWatch2-hw

    hardware for aWatch2

    177 parts18
  • 2 layers112 × 57 mmCaravansensor, the printed circuit board in 3D

    Caravansensor

    MartinVerges/womolin-waterlevel

    DIY project to build a smart fuel sensor for RVs or in other projects. It is based on air pressure and is able to measure fresh water as well as grey and black water levels with high precision.

    226 parts17
  • 2 layers72.9 × 25.4 mmBeepSensors, the printed circuit board in 3D

    BeepSensors

    57Bravo/BeepSensors

    GPS, IMU, MAG, BARO, and Buzzer for the BeepBerry

    19 parts15

Questions

How big is the Nucleo STM32 Flight Controller PCB?

It measures 53 × 56.7 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Nucleo STM32 Flight Controller use?

29 parts, built around the BMP388 and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Nucleo STM32 Flight Controller KiCad files?

From the joz228-rgb/Flight-Controller-Shield repository on GitHub, at the commit this page was made from: the board is Nucleo STM32 Flight Controller.kicad_pcb and its schematic Nucleo STM32 Flight Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Nucleo STM32 Flight Controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask joz228-rgb before reusing the design.