2 layers78 × 130 mm
Lofence
kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.
65 parts142MIT
2 layers99.1 × 113.5 mm
Rpi ibex hyperdisplay
jovan3/rpi-ibex-hyperpixel1Portable Raspberry Pi Zero based computer with a Hyperpixel display
- Size
- 99.1 × 113.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 58
- Pads
- 346
- Tracks, vias
- 1,048, 57
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 13 Dec 2021
- Updated
- 13 Dec 2021
Overview
Rpi ibex hyperdisplay is an open-source printed circuit board by jovan3, from the jovan3/rpi-ibex-hyperpixel repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.1 × 113.5 mm with 66 parts on 58 nets, routed with 1,048 tracks and 57 vias.
It is built around the ATMEGA328PB-AU. Its parts include 3 capacitors, 3 connectors, 1 IC and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
readme.mdRPi Ibex (Hyperpixel edition)
RPi Ibex is a Raspberry Pi Zero based portable computer. The goal of the project is to provide a way to use Raspberry Pi Zero as a portable computer using parts that are available, cheap and relatively easy to solder (no exotic keyboard controller chips required).
This repository contains Kicad project files for the PCB. The keyboard is just simple push buttons soldered directly on the board. The keyboard controller is an Atmega 328P.
Board renderings
Kicad 3D renderings of the front and back of the PCB:
Front:
Back:
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 50 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | -/_, ,/< (↓), ;/:, ./> (→), / ?, +/=, 0/) (Esc), 1/! ("), 2/@ ('), 3/# ({), 4/$ ([), 5/% (}), 6/^ (]), 7/& (`), 8/* (\), 9/( (|) +34 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 1K, 1K |
| 2 | 22pF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C3 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 10K |
| 1 | 16MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | ATmega328PB-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J1 |
| 1 | Hyperpixel_4.0_Touch | TFT_modules:Hyperpixel_4.0_Touch | Display |
| 1 | Raspberry_Pi_2_3 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J3 |
| 1 | USART_Connector_1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
The 62 most common of 66 parts.
Questions
How big is the Rpi ibex hyperdisplay PCB?
It measures 99.1 × 113.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Rpi ibex hyperdisplay use?
66 parts, built around the ATMEGA328PB-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rpi ibex hyperdisplay KiCad files?
From the jovan3/rpi-ibex-hyperpixel repository on GitHub, at the commit this page was made from: the board is rpi-ibex-hyperdisplay.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rpi ibex hyperdisplay design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers102 × 81.5 mm
C64pico
silvervest/c64pico
This is a tiny emulated C64 running on a Raspberry Pi Pico! Full details of the build can be found at https://www.youtube.com/watch?v=hgLhGpbC6E4
97 parts86 - 2 layers58.4 × 34.3 mm
SIO2SD
c0pperdragon/SIO2SD
An Arduino-based floppy drive emulator for the atari 8 bit computers.
26 parts83 - 2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers88.9 × 50.8 mm
BLDC BIZ CARD
ageppert/Brushless-Motor-Biz-Card
A brushless motor and driver built in to a business card form-factor for learning and experimenting!
82 parts38MIT - 2 layers52.1 × 37.4 mm
Consolizer
orangeglo/PS2PSP
Board to connect a PS2 controller to a PSP 2000 (PSP Consolizer)
25 parts38GPL-3.0 - 2 layers67.3 × 54 mm
Jeep radio
latonita/jeep-canbus
Projects around CAN BUS in Chrysler Jeep - VES enabler, other small features
52 parts30MIT - 2 layers91.4 × 92.5 mm
