
Bab top
trublion/turtable_control_board_hbridge
HW control board for turntable. Controls a DC motor with a H-bridge, reads an analog audio signal envelope, dual-PCB design.

System able to control a relee to turn on or off exterior lights depending on the lighting.
Twilight switch is an open-source printed circuit board by joseguerra3000, from the joseguerra3000/twilight-switch repository on GitHub. It is a 2-layer board of 73 × 35.6 mm with 24 parts on 16 nets, routed with 81 tracks and 0 vias.
It is built around the LM555N, LM7805CT and LM7812CT, with the BD139 among its other parts. Its parts include 8 capacitors, 3 resistors, 3 ICs, 3 diodes and 1 transistor. It belongs with the sensors and measurement and lEDs and displays boards of this library.
System able to control a relee to turn on or off exterior lights depending on the lighting.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C3, C5, C7, C8 |
| 4 | SolderWirePad_single_2mmDrill | Wire_Pads:SolderWirePad_single_2mmDrill | AC-INPUT, AC-OUTPUT, LOW_AC, LOW-AC2 |
| 3 | 470uF | Capacitors_ThroughHole:C_Radial_D8_L21_P3.8 | C2, C4, C6 |
| 1 | 10nF | Capacitors_ThroughHole:C_Disc_D6_P5 | C1 |
| 1 | 1N4007 | Diodes_ThroughHole:Diode_DO-41_SOD81_Vertical_AnodeUp | D3 |
| 1 | 2k | w_pth_resistors:RC07 | R4 |
| 1 | 400k | w_pth_resistors:RC05 | R2 |
| 1 | 560 | w_pth_resistors:RC07 | R3 |
| 1 | BD139 | TO_SOT_Packages_THT:SOT126_SOT32_Housing_Vertical_BigPads | Q1 |
| 1 | Diode_Bridge | w_pth_diodes:bridge_DFM | D1 |
| 1 | LM555N | SMD_Packages:SOIC-8-N | U2 |
| 1 | LM7805CT | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | U1 |
| 1 | LM7812CT | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical | U3 |
| 1 | Led_Small | w_indicators:led_5mm_green | D2 |
| 1 | Photores | w_pin_strip:pin_socket_2mm_2 | LDR1 |
| 1 | RELAY_HJR-3FF_Z | w_relay:relay_hjr-3ff_z | RLY1 |

trublion/turtable_control_board_hbridge
HW control board for turntable. Controls a DC motor with a H-bridge, reads an analog audio signal envelope, dual-PCB design.

CarloMara/didactic-octo-PSU
So, @nicogela and I decided to build a LAB PSU, but because we're lazy people and we don't like to carry weight we're tring to unite the high efficiency of the switching topologies to the high stability and low noise of…






It measures 73 × 35.6 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the LM555N, LM7805CT, LM7812CT and BD139. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the joseguerra3000/twilight-switch repository on GitHub, at the commit this page was made from: the board is KiCad Project/twilight-switch.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask joseguerra3000 before reusing the design.