Skip to the content
2 layers41 × 54 mmIo expander pcb, the printed circuit board in 3D

TCA9555 IO Expander PCB

Size
41 × 54 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
27
Pads
121
Tracks, vias
155, 35
Pours
83
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
23 Feb 2026
Updated
23 Feb 2026

Overview

Io expander pcb is an open-source printed circuit board by jonoerik, from the jonoerik/io-expander-pcb repository on GitHub. It is a 2-layer board of 41 × 54 mm with 26 parts on 27 nets, routed with 155 tracks and 35 vias.

It is built around the TCA9555PWR(UMW). Its parts include 7 connectors, 6 resistors, 2 capacitors and 1 IC.

Main components

1

README

README.md

TCA9555 IO Expander PCB

Assembly

  • If daisy-chaining multiple boards, only place R1 and R2 on one board.
  • R6 is only required if using the interrupt pin output of the board.
  • A0, A1, and A2 solder jumpers are used to set the configurable I2C address bits for the TCA9555 chip. On each board, for each A* bit, solder across either the 0 or the 1 jumper. For bits set to 1, ensure the adjacent A3/A4/A5 is also placed.
  • J1 and J2 use the STEMMA QT I2C pinout, and can be used to daisy chain up to 8 of these boards.

circuit schematic circuit schematic PCB layout render of assembled PCB

Parts

26
QtyValueFootprintReferences
610KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2, R3, R4, R5, R6
6SolderJumper_2_Openio-expander-pcb:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP0, JP1, JP2, JP3, JP4, JP5
4MountingHole_3.2mm_M3_Pad_ViaMountingHole:MountingHole_3.2mm_M3_Pad_ViaREF1, REF2, REF3, REF4
24392 STEMMA QT Horizontal (I2C)Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_HorizontalJ1, J2
2Conn_01x04_PinConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_HorizontalJ6, J7
2Conn_01x08_PinConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_HorizontalJ4, J5
10.1uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC2
11uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1
1Conn_01x01_PinConnector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_HorizontalJ3
1TCA9555PWRPackage_SO:TSSOP-24_4.4x7.8mm_P0.65mmU1

Similar boards

  • 4 layers138.2 × 200.4 mmHV servo drive v1, the printed circuit board in 3D

    HV servo drive v1

    ExcessiveMotion/drive-hardware

    383 parts175CERN-OHL-W-2.0
  • 4 layers86 × 100 mmDB25 encoder card, the printed circuit board in 3D

    DB25 encoder card

    ExcessiveMotion/controller-hardware

    217 parts87CERN-OHL-W-2.0
  • 2 layers166.5 × 113.5 mmKORA, the printed circuit board in 3D

    KORA

    fmash16/KORA

    An Ergonomic Orthogonal Split keyboard with high modularity

    86 parts11GPL-3.0
  • 2 layers137.2 × 80 mmModulo ergo42, the printed circuit board in 3D

    Modulo ergo42

    Biacco42/modulo-ergo42

    これは Beta バージョンの組み立てガイドです。Alpha 版は Alpha ブランチのドキュメントを参照してください。

    56 parts10
  • 2 layers128 × 83.5 mmSsol56-pcb, the printed circuit board in 3D

    Ssol56-pcb

    eswai/SSOL56

    Split Semi Ortholinear 56-key keyboard

    44 parts4
  • 4 layers69 × 81 mmSharpCONSOLE, the printed circuit board in 3D

    SharpCONSOLE

    lastlxrd/Pogopo

    Open-source modular ESP32-S3 handheld console featuring custom hardware, a Sharp Memory LCD, pogopoOS, emulation, motion controls, audio, haptics, and expandable modules.

    196 parts2Apache-2.0
  • 2 layers95 × 185 mmCalculator, the printed circuit board in 3D

    Calculator

    AnhadSawhney/MechanicalKeyCalculator

    These are the CAD files for a calculator with mechanical keyswitches.

    151 parts1MIT
  • 2 layers139.2 × 82 mmSplit56, the printed circuit board in 3D

    Split56

    Biacco42/split56

    modulo seriese split keyboard

    54 parts1MIT

Questions

How big is the Io expander pcb PCB?

It measures 41 × 54 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Io expander pcb use?

26 parts, built around the TCA9555PWR(UMW). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Io expander pcb KiCad files?

From the jonoerik/io-expander-pcb repository on GitHub, at the commit this page was made from: the board is io-expander-pcb.kicad_pcb and its schematic io-expander-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Io expander pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask jonoerik before reusing the design.