4 layers
LightProcessor preFreeRoute
K0iNguyen/LightProcessor
PCB code and design for Optical chemical potential mapping research at Zeng Lab, Purdue University.
131 parts
2 layers68.6 × 53.3 mm
Arduino LCD
jonnydyer/Arduino_wellArduino shield ot manage our well
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 53
- Pads
- 135
- Tracks, vias
- 183, 13
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 May 2020
- Updated
- 13 Jun 2020
Overview
Arduino LCD is an open-source printed circuit board by jonnydyer, from the jonnydyer/Arduino_well repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 39 parts on 53 nets, routed with 183 tracks and 13 vias.
It is built around the LM324 and AP2112K-3.3. Its parts include 13 resistors, 13 connectors, 7 capacitors, 3 ICs and 2 transistors. It belongs with the lEDs and displays boards and the ESP8266 boards of this library.
Main components
2Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C4, C5, C6, C7 |
| 4 | CONN_01X01 | Socket_Arduino_Uno:Arduino_1pin | P5, P6, P7, P8 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11, R12, R13 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3 |
| 3 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R8, R9 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5, R6 |
| 2 | Q_NPN_EBC | Package_TO_SOT_THT:TO-92L_HandSolder | Q1, Q2 |
| 1 | 10k | Potentiometer_SMD:Potentiometer_ACP_CA9-VSMD_Vertical_Hole | RV1 |
| 1 | 150R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 1 | 4.7u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Analog | Socket_Arduino_Uno:Socket_Strip_Arduino_1x06 | P2 |
| 1 | Conn_02x07_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x07_P2.54mm_Vertical | J1 |
| 1 | DPsense | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x10 | P3 |
| 1 | Digital | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P4 |
| 1 | ESP-01v090 | ESP8266:ESP-01 | U3 |
| 1 | Isense | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | LM324 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | Power | Socket_Arduino_Uno:Socket_Strip_Arduino_1x08 | P1 |
| 1 | Psense | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | Vsens | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
Similar boards
- 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers36.8 × 34.7 mm
Tinylab proto1
espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!
79 parts1.2k - 4 layers82.6 × 82.5 mm
- 2 layers231.1 × 106.7 mm
- 4 layers82.6 × 82.6 mm
- 4 layers72.4 × 95.3 mm
DingoPDM
corygrant/dingoPDM
Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.
156 parts128MIT - 2 layers191.5 × 76 mm
Pcb project
CrashOverride85/zc95
4 channel EStim box inspired by the mk312bt, with Lua scripting support
337 parts117GPL-3.0
Questions
How big is the Arduino LCD PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arduino LCD use?
39 parts, built around the LM324 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arduino LCD KiCad files?
From the jonnydyer/Arduino_well repository on GitHub, at the commit this page was made from: the board is Arduino_LCD.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arduino LCD design in my own project?
Its repository states no licence, so its author keeps all rights: ask jonnydyer before reusing the design.