

ELS project
this will contain everything in the Electronic lead screw project
- Size
- 95.6 × 86.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 83
- Nets
- 66
- Pads
- 250
- Tracks, vias
- 454, 214
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Apr 2026
- Updated
- 8 May 2026
Overview
ELS project is an open-source printed circuit board by jonasnic, from the jonasnic/Dreimaskin-ELS repository on GitHub. It is a 4-layer board of 95.6 × 86.1 mm with 83 parts on 66 nets, routed with 454 tracks and 214 vias.
It is built around the SP3485EN-L/TR, MX250-3.5-03P-B-GY01-CU-A and MSASU168SB5105MTNA01, with the SMF05CT1G, MX205V-5.0-03P-GN01-CU-A and MX250-3.5-06P-B-GY01-CU-A among its other parts. Its parts include 35 resistors, 17 capacitors, 9 connectors, 5 ICs and 4 transistors.
Main components
8SP3485EN-L/TR
SOIC-8-40℃~+85℃ 1 1 10Mbps 2mA 3.3V 32 Half-Duplex Transceiver SOIC-8 RS-485 / RS-422 ICs ROHSMaxLinearRS-485 / RS-422 ICsMX250-3.5-03P-B-GY01-CU-A
P=3.5mm(交错脚)-40℃~+105℃ 1 1.5 16~22 1x3P 3 3.5mm 300V 3P 8A Gray Through Hole P=3.5mm(交错脚) Spring Clamp System Terminal Block ROHSMAXSpring Clamp System Terminal BlockMSASU168SB5105MTNA01
06031uF 50V X5R ±20% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTaiyo YudenMultilayer Ceramic Capacitors MLCC - SMD/SMTSMF05CT1G
SOT-363-55℃~+125℃ 100W 100nA 10V 1A 30pF 5 5V 6V IEC 61000-4-2、IEC 61000-4-4 TVS SOT-363 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)MX205V-5.0-03P-GN01-CU-A
插件,P=5mmSpring Clamp System Terminal BlockMAXMX250-3.5-06P-B-GY01-CU-A
P=3.5mm(交错脚)-40℃~+105℃ 1 1.5 16~22 1x6P 3.5mm 300V 6 6P 8A Gray Through Hole P=3.5mm(交错脚) Spring Clamp System Terminal Block ROHSMAXSpring Clamp System Terminal BlockMX250-3.5-08P-B-GY01-CU-A
P=3.5mm(交错脚)Spring Clamp System Terminal BlockMAXSRR1208-120ML
SMD,12.7x12.7mm12uH 25mΩ 4.8A 6.5A ±20% SMD,12.7x12.7mm Power Inductors ROHSBournsPower Inductors
Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1kΩ | Resistor_SMD:R_0603_1608Metric | R2, R3, R6, R7, R18, R32, R33 |
| 7 | 33Ω | Resistor_SMD:R_0603_1608Metric | R19, R20, R24, R25, R26, R27, R28 |
| 5 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C7 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2, C8, C9, C10, C11 |
| 4 | 1.8k | Resistor_SMD:R_0603_1608Metric | R10, R12, R14, R29 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R4, R5, R9 |
| 4 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | 3.3k | Resistor_SMD:R_0603_1608Metric | R11, R13, R15, R30 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_TopOnly | H1, H2, H3, H4 |
| 3 | 100Ω | Resistor_SMD:R_0603_1608Metric | R21, R22, R23 |
| 3 | MSASU168SB5105MTNA01 | Capacitor_SMD:C_0603_1608Metric | C15, C16, C17 |
| 3 | SMF05CT1G | LCSC:SOT-363_L2.0-W1.3-P0.65-LS2.1-BR | D1, D2, D3 |
| 3 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP2, JP3, JP4 |
| 2 | Conn_01x02_Pin | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J4, J5 |
| 2 | MX205V-5.0-03P-GN01-CU-A | LCSC:CONN-TH_3P-P5.00_MX205V-5.0-03P-GN01-CU-A | CN1, CN4 |
| 1 | 100Ω | Resistor_SMD:R_0402_1005Metric | R31 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 10mΩ | Resistor_SMD:R_2512_6332Metric | R17 |
| 1 | 174 kΩ | Resistor_SMD:R_0402_1005Metric | R35 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 22.1 kΩ | Resistor_SMD:R_0402_1005Metric | R34 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J2 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J3 |
| 1 | Conn_01x05_Pin | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J1 |
| 1 | GRM155R71C104KA88D | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | GRM188R72A104KA35D | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | GRM32ER61C476KE15L | Capacitor_SMD:C_1210_3225Metric | C13 |
| 1 | INA180A1 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Jumper_2_Open | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP1 |
| 1 | LMR51420XDDCR | LCSC:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U7 |
| 1 | MX250-3.5-03P-B-GY01-CU-A | LCSC:CONN-TH_3P-P3.50_MX250-3.5-03P-B-GY01-CU-A | U6 |
| 1 | MX250-3.5-06P-B-GY01-CU-A | LCSC:CONN-TH_6P-P3.50_MX250-3.5-06P-B-GY01-CU-A | CN3 |
| 1 | MX250-3.5-08P-B-GY01-CU-A | LCSC:CONN-TH_8P-P3.50-LS5.10_MX250-3.5-08P-B-GY01-CU-A | CN2 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad2.0mm | NT1 |
| 1 | SP3485EN-L/TR | LCSC:SOIC-8_L5.0-W4.0-P1.27-LS6.0-BL | U5 |
| 1 | SRR1208-120ML | Inductor_SMD:L_Bourns_SRR1208_12.7x12.7mm | L3 |
| 1 | ~ | doit-esp32-devkit-kicad:ESP32-DEVKIT-V1_30pin | U1 |
Similar boards
- 2 layers40.5 × 78 mm

- 4 layers63 × 56 mm

- 4 layers85 × 56 mm

- 4 layers85 × 113 mm

- 4 layers267 × 75 mm

Fracture
SharKingStudios/Fracture
An infinitely expandable, velocity sensing split midi keyboard.
208 parts10MIT - 2 layers62 × 208.5 mm

Combined
wr/airwriter
Print to vintage Apple printers from modern devices over AirPrint, or from a vintage Mac over AppleTalk.
154 parts7 - 2 layers100 × 75 mm

Display
DLaxV-Community-Projects-Hub/Open-Shot-Clock
Build your own DIY Shot Clock
209 parts5CERN-OHL-P-2.0 - 2 layers55 × 73.5 mm

Pcb dezentral
petermaerki/puenterswis_heizung_2023_git
Puenterswis Heizungsersatz, Steuerung Anlage mit Oekofen Kaskade Pellematic Maxi PESK
98 parts1
Questions
How big is the ELS project PCB?
It measures 95.6 × 86.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ELS project use?
83 parts, built around the SP3485EN-L/TR, MX250-3.5-03P-B-GY01-CU-A, MSASU168SB5105MTNA01 and SMF05CT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ELS project KiCad files?
From the jonasnic/Dreimaskin-ELS repository on GitHub, at the commit this page was made from: the board is HW/ELS_PCB/ELS_project.kicad_pcb and its schematic HW/ELS_PCB/ELS_project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ELS project design in my own project?
Its repository states no licence, so its author keeps all rights: ask jonasnic before reusing the design.