4 layers22.9 × 35.6 mm
SparkFun Red Vision Camera Board HM01B0
sparkfun/SparkFun_Red_Vision_Camera_Board_HM01B0
The SparkFun Red Vision Camera Board - HM01B0 is a breakout board for the HM01B0 camera module.
115 parts
4 layers50 × 80 mm
Himax usb board
johnMamish/lilcamUSB webcam that uses himax sensors
- Size
- 50 × 80 mm
- Copper layers
- 4
- Thickness
- 1.58 mm
- Parts
- 120
- Nets
- 190
- Pads
- 580
- Tracks, vias
- 1,983, 334
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Oct 2023
- Updated
- 31 May 2024
Overview
Himax usb board is an open-source printed circuit board by johnMamish, from the johnMamish/lilcam repository on GitHub. It is a 4-layer board of 50 × 80 mm with 120 parts on 190 nets, routed with 1,983 tracks and 334 vias.
It is built around the STM32F750Z8T6, USB3320C-EZK-TR and HM0360-MWA, with the HM01B0-MWA, 74AHC1G08GW and ABM3B-12.000MHZ-B2-T among its other parts. Its parts include 61 capacitors, 31 resistors, 14 ICs, 3 diodes and 3 connectors. It belongs with the sensors and measurement boards and the STM32 boards of this library.
Main components
7
STM32F750Z8T6
LQFP-144(20x20)-40℃~+85℃ 1.7V~3.6V 114 12bit 12bit 216MHz 32 Bit 320KB 64KB ARM Cortex-M7 Built-in FLASH LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
USB3320C-EZK-TR
QFN-32-EP(5x5)-40℃~+85℃ 1.8V~3.3V 11.1mA 18uA Transceiver USB 2.0 QFN-32-EP(5x5) USB Converters ROHSMicrochip TechnologyUSB ConvertersHM0360-MWA
CSP-46-20℃~+85℃ 3.6umx3.6um 640Hx480V CMOS Image Sensor Multi-camera synchronous trigger、On-chip image signal processing、Regional image control、On-chip statistical output CSP-46 Image Sensors ROHSHimax TechnologiesImage SensorsHM01B0-MWA
-Image SensorsHimax Technologies
74AHC1G08GW
SOT-353-40℃~+125℃ 1 1.5V~3.85V 1.9V~2V、2.9V~3V、3.7V~3.94V、4.4V~4.5V 100mV、360mV~550mV 10nA 2 2V~5.5V 500mV~1.65V 74AHC Series 9.5ns@3.3V,15pF AND Gate Overvoltage-tolerant input StandardCMOS SOT-353 Logic Gates ROHSMDDLogic Gates
ABM3B-12.000MHZ-B2-T
SMD5032-4P-20℃~+70℃ 12MHz 18pF 70Ω Crystal Oscillator ±20ppm ±50ppm SMD5032-4P Crystals ROHSAbraconCrystals
USB4105-GF-A-120
SMD-40℃~+85℃ 1 16P 48V 5A Black Female Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdThis is a USB camera which uses the ultra-low-power Himax HM01B0 and HM0360 sensors. It's intended to act as an evaluation platform for these sensors; commercially available evaluation platforms don't allow for the use of custom optics.
Please contact me if you're interested in buying one, we might be able to set something up.
Parts
120| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | 100n | Capacitor_SMD:C_0402_1005Metric | C10, C12, C13, C14, C15, C16, C17, C18, C19, C20, C23, C25, C27, C28, C29, C31 +20 |
| 14 | 1u | Capacitor_SMD:C_0402_1005Metric | C8, C11, C43, C44, C45, C46, C47, C48, C49, C50, C51, C52, C53, C54 |
| 9 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R4, R6, R14, R15, R16, R17, R18, R29 |
| 6 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R10, R12, R13, R31 |
| 5 | AP7331-SNG-7 | diodes_incorporated:DFN200X200X60-8N | U6, U7, U8, U9, U10 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C24, C26, C30, C32 |
| 3 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C2, C3, C56 |
| 3 | 330 | Resistor_SMD:R_0402_1005Metric | R7, R8, R9 |
| 3 | 74CBTLV3257BQ_115 | 74CBTLV3257BQ_115:DHVQFN16_SOT763-1_NEX | U12, U13, U14 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 3 | SW_Push | himax:TL3302AFxxxQG | SW1, SW2, SW3 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric | R5, R11 |
| 2 | 1.2k | Resistor_SMD:R_0402_1005Metric | R22, R24 |
| 2 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C1, C4 |
| 2 | C_Small | Capacitor_SMD:C_0402_1005Metric | C21, C22 |
| 2 | FerriteBead_Small | Capacitor_SMD:C_0603_1608Metric | FB1, FB2 |
| 2 | m12_lens_mount_mech | himax:m12_lens_mount_mech | H1, H2 |
| 1 | 1.6k | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R27 |
| 1 | 12k 1% | Resistor_SMD:R_0402_1005Metric | R30 |
| 1 | 16k | Resistor_SMD:R_0402_1005Metric | R25 |
| 1 | 2.2k | Resistor_SMD:R_0402_1005Metric | R26 |
| 1 | 2.4k | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R28 |
| 1 | 3.3k | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 5.6k | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 74AHC1G08 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U5 |
| 1 | ABM3B-12.000MHZ-B2-T | ABM3B_12_000MHZ_B2_T:XTAL_ABM3B-12.000MHZ-B2-T | Y1 |
| 1 | BM06B-SURS-TF_SWD | BM06B_SURS_TF:CONN6x1_BM06B-SURS-TF_JST | J3 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | HM0360 | himax:hm0360 | U3 |
| 1 | STM32F750Z8T6 | STM32F750Z8T6:LQFP-144_STM | U1 |
| 1 | TL331 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | USB3320C-EZK-TR | USB3320C_EZK:QFN50P500X500X100-33N330X330 | U11 |
| 1 | USB4105GFA | USB4105_GF_A:GCT_USB4105GFA | J1 |
| 1 | hm01b0-mwa | himax:hm01b0-xWA | U2 |
Questions
How big is the Himax usb board PCB?
It measures 50 × 80 mm and has 4 copper layers, 1.58 mm thick.
What parts does the Himax usb board use?
120 parts, built around the STM32F750Z8T6, USB3320C-EZK-TR, HM0360-MWA and HM01B0-MWA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Himax usb board KiCad files?
From the johnMamish/lilcam repository on GitHub, at the commit this page was made from: the board is himax_usb_board/v1-0/hardware/himax_usb_board.kicad_pcb and its schematic himax_usb_board/v1-0/hardware/bus_mux.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Himax usb board design in my own project?
Its repository states no licence, so its author keeps all rights: ask johnMamish before reusing the design.
Similar boards
- 4 layers30 × 20 mm
Hm0360 breakout
NUBIVlab/SpiderCam
[CVPR 2026] SpiderCam: Low-power Snapshot Depth from Differential Defocus
28 parts3MIT - 2 layers121 × 70.5 mm
- 2 layers45 × 20 mm
- 4 layers394 × 110 mm
Gpu cluster backplane
antmicro/gpu-cluster-backplane
This project contains open hardware design files for a PCB supporting power distribution in a cluster composed of GPUs. This board has been derived from an open source d1600e-psu-breakout created by Antmicro.
616 parts4Apache-2.0 - 4 layers58.6 × 53.6 mm
Usbhub
gmarcus1018/Portfolio_Web
Personal portfolio site built with Astro. Static site, deploys to Cloudflare Pages.
65 parts - 6 layers91.8 × 139.8 mm
- 4 layers115 × 82.3 mm
MainPCB
HelloAlex4/Maturitaetsarbeit-Design-and-Development-of-a-Portable-Stereoscopic-Wigglegram-Camera
Documentation of the merged wigglegram camera
288 parts12