2 layers133.4 × 50.8 mm
2 layers60 × 40 mm
Mirf motion
joerg65/rf24_motion_hwThis is the KiCad project of RF24 Motion Sensor.
- Size
- 60 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 18
- Pads
- 67
- Tracks, vias
- 211, 16
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Jun 2017
- Updated
- 8 Jun 2017
Overview
Mirf motion is an open-source printed circuit board by joerg65, from the joerg65/rf24_motion_hw repository on GitHub. It is a 2-layer board of 60 × 40 mm with 20 parts on 18 nets, routed with 211 tracks and 16 vias.
It is built around the ATTINY84A-SSF. Its parts include 6 capacitors, 2 resistors, 2 diodes, 2 connectors and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdrf24_motion_hw
This is the KiCad project of RF24 Motion Sensor.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10n | Capacitors_SMD:C_1206_HandSoldering | C2, C3, C5 |
| 1 | 100k | Resistors_SMD:R_1206_HandSoldering | R2 |
| 1 | 100n | Capacitors_SMD:C_1812_HandSoldering | C6 |
| 1 | 22 | Capacitors_SMD:c_elec_5x4.5 | C1 |
| 1 | 2M2 | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | 3X2 | Pin_Headers:Pin_Header_Straight_2x03 | P2 |
| 1 | 470n | Capacitors_SMD:C_4.6_4.0_HandSoldering | C4 |
| 1 | 4X2 | Pin_Headers:Pin_Header_Straight_2x04 | P1 |
| 1 | ATTINY84A-SS | SMD_Packages:SOIC-14_N | D1 |
| 1 | E931.96 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | D2 |
| 1 | Jumper_NO_Small | Pin_Headers:Pin_Header_Straight_1x02 | JP1 |
| 1 | LHi968 | TO_SOT_Packages_THT:TO-43_3Pin | Q1 |
| 1 | SW_PUSH | Buttons_Switches_ThroughHole:SW_PUSH_SMALL | SW1 |
| 1 | Term-2p | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | X1 |
The 16 most common of 20 parts.
Similar boards
- 2 layers99.4 × 38.6 mm
Slider driver
mage0r/RSA0N11M9A0J_motorised_slider
This is a H-bridge driver board for the RSA0N11M9A0J motorised Slider. It uses a L9110 and capacitive sensor.
38 parts7 - 4 layers85 × 56 mm
- 2 layers13.6 × 23.2 mm
Trinkle
mage0r/trinkle
A breakout board for the ATTiny84. Sometimes a Trinket just won't do...
12 parts2 - 2 layers100 × 50 mm
Moba block stelle
hpbock/moba-bockstelle
Ein Blockstellenmodul für analoge Modellbahnen zur Ansteuerung von Lichtsignalen, Zugbeeinflussung und Belegtmeldung für Loconet-T.
88 parts1 - 2 layers25.1 × 50.5 mm
- 2 layers70 × 55 mm
Open lightning trigger
conifarad/open-lightning-trigger
A low-cost optical camera trigger for lightning and other phenomena
50 partsCERN-OHL-P-2.0 - 2 layers25.5 × 25.5 mm
Module
Dhruv2212-star/Electronic-dice
A simple device in which you press a button to get a random number between 1-6 like an actual dice but it's all inside a computer
18 parts
Questions
How big is the Mirf motion PCB?
It measures 60 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mirf motion use?
20 parts, built around the ATTINY84A-SSF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mirf motion KiCad files?
From the joerg65/rf24_motion_hw repository on GitHub, at the commit this page was made from: the board is mirf-motion.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mirf motion design in my own project?
Its repository states no licence, so its author keeps all rights: ask joerg65 before reusing the design.