2 layers33 × 33 mm
2 layers25.1 × 50.5 mm
HallStepMicro
clothbot/PeristalticHallStepPeristaltic Pump Hall Sensor Board
- Size
- 25.1 × 50.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 23
- Pads
- 101
- Tracks, vias
- 159, 26
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 27 Sep 2013
- Updated
- 10 Oct 2013
Overview
HallStepMicro is an open-source printed circuit board by clothbot, from the clothbot/PeristalticHallStep repository on GitHub. It is a 2-layer board of 25.1 × 50.5 mm with 30 parts on 23 nets, routed with 159 tracks and 26 vias.
It is built around the ATTINY84A-SSF. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdPeristalticHallStep
Peristaltic Pump Hall Sensor Board
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 5K | SM0805 | RBRK1, RENB1, RMODE1, RPHASE1, RRESET1 |
| 4 | 0.1u | SM0805 | CD1, CD2, CD3, CD4 |
| 4 | 10p | SM0805 | CH1, CH2, CH3, CH4 |
| 4 | A3213 | SOT-23W | UHall1, UHall2, UHall3, UHall4 |
| 4 | CONN_2 | SM0805 | RPU1, RPU2, RPU3, RPU4 |
| 3 | CONN_6 | SIL6-offset-0p005 | DCM1, HALL6IN1, HALL6OUT1 |
| 1 | 0.0 | SM0805 | RDIR1 |
| 1 | ATTINY84A-SS | SO14E | IC1 |
| 1 | CONN_2 | SIL-2 | RESET1 |
| 1 | CONN_3 | SIL3-offset-0p005 | SENSE1 |
| 1 | CONN_3X2 | pin_array_3x2-offset-0p005 | ISP6PIN1 |
| 1 | CONN_5X2 | PIN_ARRAY_5x2-offset-0p005 | STEPIN1 |
More from clothbot/PeristalticHallStep
4- 2 layers
- 2 layers6.3 × 20.3 mm
- 2 layers
Similar boards
- 2 layers133.4 × 50.8 mm
- 2 layers99.4 × 38.6 mm
Slider driver
mage0r/RSA0N11M9A0J_motorised_slider
This is a H-bridge driver board for the RSA0N11M9A0J motorised Slider. It uses a L9110 and capacitive sensor.
38 parts7 - 4 layers85 × 56 mm
- 2 layers13.6 × 23.2 mm
Trinkle
mage0r/trinkle
A breakout board for the ATTiny84. Sometimes a Trinket just won't do...
12 parts2 - 2 layers100 × 50 mm
Moba block stelle
hpbock/moba-bockstelle
Ein Blockstellenmodul für analoge Modellbahnen zur Ansteuerung von Lichtsignalen, Zugbeeinflussung und Belegtmeldung für Loconet-T.
88 parts1 - 2 layers70 × 55 mm
Open lightning trigger
conifarad/open-lightning-trigger
A low-cost optical camera trigger for lightning and other phenomena
50 partsCERN-OHL-P-2.0 - 2 layers25.5 × 25.5 mm
Module
Dhruv2212-star/Electronic-dice
A simple device in which you press a button to get a random number between 1-6 like an actual dice but it's all inside a computer
18 parts - 2 layers25.4 × 72.4 mm
Questions
How big is the HallStepMicro PCB?
It measures 25.1 × 50.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HallStepMicro use?
30 parts, built around the ATTINY84A-SSF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HallStepMicro KiCad files?
From the clothbot/PeristalticHallStep repository on GitHub, at the commit this page was made from: the board is hallstepmicro/HallStepMicro.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HallStepMicro design in my own project?
Its repository states no licence, so its author keeps all rights: ask clothbot before reusing the design.