Skip to the content
2 layers78.7 × 50.9 mmKiCad, the printed circuit board in 3D

A collection of my KiCad electronic design projects.

Size
78.7 × 50.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
31
Pads
67
Tracks, vias
123, 1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
21 Aug 2026
Updated
26 Aug 2026

Overview

KiCad is an open-source printed circuit board by joeljo777, from the joeljo777/kiCad repository on GitHub. It is a 2-layer board of 78.7 × 50.9 mm with 14 parts on 31 nets, routed with 123 tracks and 1 via.

It is built around the MAX30102. Its parts include 4 resistors, 3 capacitors, 3 switches, 2 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

KiCad Projects

A collection of my KiCad electronic design projects.

Projects

FolderDescription
Ckt_simulateCircuit simulation project
p1SPO2 sensor PCB design (schematic + PCB + gerbers)
v2vVehicle-to-Vehicle (V2V) communication system (LoRa SX1276 + GPS NEO-6M)

Tools

Parts

14
QtyValueFootprintReferences
41kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2, R3, R4
3100nCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC1, C2, C3
3SW_PushButton_Switch_THT:SW_PUSH_6mmSW1, SW2, SW3
1Arduino_Nano_v3.xModule:Arduino_NanoA1
1LEDLED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm_IRGreyD1
1MAX30102sp02_stuff:MAX30102U1
1SSD1306sp02_stuff:SSD1306U2

Similar boards

  • 4 layers82.8 × 33 mmE ink watch, the printed circuit board in 3D

    E ink watch

    sandgum/Triangulate-ES_01-Watch

    A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power

    162 parts22
  • 4 layers28 × 34.7 mmWearable, the printed circuit board in 3D

    Wearable

    theheraldproject/herald-hardware

    Permissively licensed opensource hardware designs for Herald powered wearables and beacons. Supports digital contact tracing and other eHealth approaches.

    82 parts6
  • 4 layers124.7 × 64.3 mmRP2040 SOS band, the printed circuit board in 3D

    RP2040 SOS band

    abhinav937/RP2040_SOS_band

    PCB design files for RP2040 based SmartWatch. It features an accelerometer, a GPS module and a cellular module.

    107 parts3
  • 2 layers44 × 88.2 mmModulo 7, the printed circuit board in 3D

    Modulo 7

    Epivaral/CursoIoT

    Material complementario del curso: INTRODUCCIÓN A IOT, ALMACENAMIENTO EN LA NUBE Y ANÁLISIS DE DATA

    11 parts3
  • 4 layers77 × 48.6 mmNX ISD, the printed circuit board in 3D

    NX ISD

    Ghost3379/NX-ISD

    A more sophisticated version of the Artemis Watch by Circuitmess.

    116 parts2GPL-3.0
  • 2 layers75.1 × 50.1 mmPcb tutorial, the printed circuit board in 3D

    Pcb tutorial

    ODARI-CHARLES1/Pcb_Project

    A tutorial on creating a custom symbol and Footprint

    14 parts2
  • 4 layers75 × 50 mmDIY SPO2-KiCAD Project, the printed circuit board in 3D

    DIY SPO2-KiCAD Project

    Soham3126/DIY-SPO2-KiCAD-Project

    A low-cost, non-invasive Pulse Oximeter (SpO2) and Heart Rate monitor based on the MAX30102 sensor and Arduino. This project features real-time PPG signal processing, I2C communication, and a custom PCB design for…

    19 parts2
  • 10 layers100 × 200 mmTdse tf 2-01, the printed circuit board in 3D

    Tdse tf 2-01

    Taller-de-sistemas-embebidos-tps/tdse-tf_2-01

    Trabajo Final - Taller de Sistemas Embebidos - FIUBA

    17 parts2

Questions

How big is the KiCad PCB?

It measures 78.7 × 50.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the KiCad use?

14 parts, built around the MAX30102. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the KiCad KiCad files?

From the joeljo777/kiCad repository on GitHub, at the commit this page was made from: the board is p1/p1.kicad_pcb and its schematic Ckt_simulate/Ckt_simulate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the KiCad design in my own project?

Its repository states no licence, so its author keeps all rights: ask joeljo777 before reusing the design.