
TouchDrum V2.0
JoelEB/Touch_Drum
A repo for all thing TouchDrum Related: hardware/software files, 3D files, etc.

A repo for all thing TouchDrum Related: hardware/software files, 3D files, etc.
DS Special Object is an open-source printed circuit board by JoelEB, from the JoelEB/Touch_Drum repository on GitHub. It is a 2-layer board of 52.7 × 30.5 mm with 36 parts on 23 nets, routed with 195 tracks and 29 vias.
It is built around the DRV2605LDGS and BSS138. Its parts include 10 resistors, 7 capacitors, 5 ICs, 4 connectors and 2 transistors.
A repo for all thing TouchDrum Related: hardware/software files, 3D files, etc.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10KΩ | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R7, R8 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C6 |
| 2 | 22uF | Resistor_SMD:R_0805_2012Metric | C3, C4 |
| 2 | 330Ω | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | STAND-OFF | Hardware:STAND-OFF | H1, H2 |
| 1 | 1.0uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 1000UF | Capacitors:CPOL-RADIAL-5MM-10MM | C7 |
| 1 | 100KΩ | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 2.2UH | Inductor_SMD:L_Bourns-SRN4026 | L1 |
| 1 | 750KΩ | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | ADAFRUIT_HUZZAH32 | MeowWolf_Templates:ADAFRUIT_HUZZAH32 | U3 |
| 1 | Conn_01x02 | Connector_Molex:Molex_Nano-Fit_105309-xx02_1x02_P2.50mm_Vertical | J3 |
| 1 | Conn_01x02 | Connectors:1X02 | J4 |
| 1 | Conn_01x03 | Connector_Molex:Molex_Nano-Fit_105309-xx03_1x03_P2.50mm_Vertical | J2 |
| 1 | DRV2605L | Silicon-Standard:VSSOP-10 | U5 |
| 1 | JST_2MM_MALE | Connectors:JST-2-SMD | J1 |
| 1 | JUMPER-SMT_2_NO | Jumpers:SMT-JUMPER_2_NO_SILK | JP1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | LIPO-OUTLINE2000 | Batteries:LIPO-1000 | BT1 |
| 1 | MAX17048DFN8 | Silicon-Standard:DFN-8 | U2 |
| 1 | MeowWolf_Logo_Horizontal | MeowWolf_Logos:MW_Logo_Horizontal_1.25inch | LOGO1 |
| 1 | PAM2401 | Silicon-Standard:MSOP8 | U4 |
| 1 | SN74LV1T125_LEVEL_SHIFTER | Silicon-Standard:SOT23-5 | U1 |
| 1 | SWITCH-DPDT-SMD-AYZ0202 | Switches:SWITCH_DPDT_SMD_AYZ0202 | S1 |

JoelEB/Touch_Drum
A repo for all thing TouchDrum Related: hardware/software files, 3D files, etc.

JoelEB/Touch_Drum
A repo for all thing TouchDrum Related: hardware/software files, 3D files, etc.

JoelEB/Touch_Drum
A repo for all thing TouchDrum Related: hardware/software files, 3D files, etc.

sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power



VarunAPatil/MedSafe
The goal: a compact, wrist-worn device that simultaneously tracks heart rate & SpO₂, motion & orientation, altitude & atmospheric pressure, and GNSS location — all in one tightly integrated system.


KOEGlike/meko
A linux music player with ddr3, a 70hz e-paper display and a haptic touchpad

sffubs/dactyl_manuform_gimbal
Instrutions and designs for building the dactyl-manuform-gimbal keyboard

It measures 52.7 × 30.5 mm and has 2 copper layers, 1.6 mm thick.
36 parts, built around the DRV2605LDGS and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JoelEB/Touch_Drum repository on GitHub, at the commit this page was made from: the board is Documentation/Digital_Storytelling_Special_Object_PCB-master/Hardware/DS_Special_Object.kicad_pcb and its schematic Hardware/KiCad_Files/Touch_Drum_V1/Base/Touch_Drum_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JoelEB before reusing the design.