2 layers35.6 × 45.9 mm
2 layers48.8 × 38 mm
MotorController
joeferner/breakoutBoards2Collection of break out boards
- Size
- 48.8 × 38 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 26
- Pads
- 116
- Tracks, vias
- 237, 35
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 5 Apr 2013
- Updated
- 26 May 2016
Overview
MotorController is an open-source printed circuit board by joeferner, from the joeferner/breakoutBoards repository on GitHub. It is a 2-layer board of 48.8 × 38 mm with 34 parts on 26 nets, routed with 237 tracks and 35 vias.
It is built around the MC33926PNB. Its parts include 11 resistors, 8 capacitors, 5 connectors, 3 diodes and 2 ICs. It belongs with the robots and motor control boards of this library.
Main components
1README
old/README.md- breakoutBoards01 - QFP 0.5mm 4-100pins
- breakoutBoards02 - FT232H
- breakoutBoards03 - TSSOP 0.65mm, TSOP 0.8mm, VGA, AVR ISP, JTAG Converter, BNC, SOIC 1.27mm
- breakoutBoards04 - FT312D Android ADK Host
- breakoutBoards05 - MMA8453Q Accelerometer, L3GD20 Gyroscope
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | SM0805 | R1, R2, R4, R9, R10, R11 |
| 4 | 0.1uF 35V | SM0805 | C3, C4, C5, C6 |
| 4 | CONN_1 | 1pin | P1, P2, P3, P4 |
| 4 | Mounting Hole | MOUNTING_HOLE_0.125in | M1, M2, M3, M4 |
| 2 | 4.7K | SM0805 | R6, R8 |
| 1 | 0.1uF | SM0805 | C1 |
| 1 | 0.47uF | SM0805 | C8 |
| 1 | 100k | SM0805 | R3 |
| 1 | 100uF 35V | CAP-CAN-6.30mm | C2 |
| 1 | 1K | SM0805 | R7 |
| 1 | 220R | SM0805 | R5 |
| 1 | 33nF 28V | SM0805 | C7 |
| 1 | 7408 | SOIC14_3.9mm | U1 |
| 1 | CONN_14X1 | PIN_ARRAY_14X1 | J1 |
| 1 | FWD | LED-1206 | D1 |
| 1 | MC33926 | QFN-PWR-8X8 | U2 |
| 1 | MOSFET-N | SOT23 | Q1 |
| 1 | PWR | LED-1206 | D3 |
| 1 | REV | LED-1206 | D2 |
Questions
How big is the MotorController PCB?
It measures 48.8 × 38 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MotorController use?
34 parts, built around the MC33926PNB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MotorController KiCad files?
From the joeferner/breakoutBoards repository on GitHub, at the commit this page was made from: the board is old/motorController.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MotorController design in my own project?
Its repository states no licence, so its author keeps all rights: ask joeferner before reusing the design.
More from joeferner/breakoutBoards
6- 2 layers39.1 × 36.6 mm
- 2 layers100 × 100 mm
- 2 layers44 × 42.1 mm
- 2 layers27 × 20.2 mm
- 2 layers45.7 × 45.7 mm
Similar boards
- 2 layers271.8 × 114.3 mm
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
426 parts282 - 2 layers84.6 × 84.6 mm
- 2 layers169.8 × 97 mm
Ardumower
Starsurfer78/Ardumower_PCBs
DIY Robot Lawn Mower Community: https://www.diy-robot-lawn-mower.com/
75 parts1GPL-3.0 - 4 layers34 × 86 mm
- 2 layers75 × 50 mm
- 2 layers271.8 × 114.3 mm
- 4 layers38 × 18 mm
- 4 layers50 × 42 mm
