
Tiny4FSK
New-England-Weather-Balloon-Society/Tiny4FSK
Horus Binary v2 HAB Tracker

KiCAD project files for T-AIM device, Embedded Systems Project course 2017
T AIM is an open-source printed circuit board by jmov, from the jmov/T-AIM-KiCAD-Project repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 87.7 × 68.7 mm with 45 parts on 46 nets, routed with 307 tracks and 77 vias.
It is built around the ATMEGA328PB-AU and TPS61200DRC. Its parts include 12 resistors, 11 capacitors, 7 connectors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
KiCAD project files for T-AIM device, Embedded Systems Project course 2017
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | Capacitors_SMD:C_1206_HandSoldering | C3, C4, C5, C9, C10, C11 |
| 4 | 10k | Resistors_SMD:R_1206_HandSoldering | R6, R7, R11, R12 |
| 4 | Screw_Hole_3_mm | T-AIM:Screw_Hole_3_mm | S**, S**, S**, S** |
| 2 | 220 | Resistors_SMD:R_1206_HandSoldering | R9, R10 |
| 2 | 220k | Resistors_SMD:R_0805_HandSoldering | R2, R3 |
| 2 | 22pF | Capacitors_SMD:C_0603_HandSoldering | C6, C7 |
| 2 | 2M | Resistors_SMD:R_0805_HandSoldering | R1, R5 |
| 2 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J1, J3 |
| 2 | ExtOsc | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | TP1, TP2 |
| 1 | 1.5M | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | 10uF | Capacitors_SMD:CP_Elec_5x5.3 | C2 |
| 1 | 10uF | Capacitors_SMD:C_1206_HandSoldering | C1 |
| 1 | 1M | Resistors_SMD:R_0805_HandSoldering | R8 |
| 1 | 22uF | Capacitors_SMD:C_1206_HandSoldering | C8 |
| 1 | 4.7uH, 1.2A | T-AIM:INDUCTOR_4.7UH | L1 |
| 1 | ADXL345 Connector | Pin_Headers:Pin_Header_Straight_1x09_Pitch2.54mm | J4 |
| 1 | ATMEGA328PB-A | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | IC1 |
| 1 | AVR-ISP-6 | T-AIM:2X3-SHROUDED | CON1 |
| 1 | Alarm Buzzer | T-AIM:AT-1220-TT-9-R | BZ1 |
| 1 | Blue LED | LEDs:LED_1206 | D2 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | Connection Button | Buttons_Switches_SMD:SW_SPST_PTS645 | SW1 |
| 1 | JY-MCU HC-05 Pins | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J6 |
| 1 | PIR Sensor Connector | TO_SOT_Packages_THT:TO-5-3 | J5 |
| 1 | Red LED | LEDs:LED_1206 | D1 |
| 1 | Reset Button | Buttons_Switches_SMD:SW_SPST_PTS645 | SW2 |
| 1 | SOLDERJUMPER_2WAY-OLDPASTE1&2 | SparkFun-Passives:SJ_3 | SJ1 |
| 1 | TPS61200 | T-AIM:DRC-10-Thermal-Vias | U1 |

New-England-Weather-Balloon-Society/Tiny4FSK
Horus Binary v2 HAB Tracker


wyolum/pi-power
Full featured power options for the Raspberry Pi. 12V, 5V, Lipo, with push/push on/off and power meter.

ageppert/SAO_Demo_Controller
A small inline SAO with an RP2040 used to demo SAOs that require smarts, but don't have it built-in.


Racer159/chatter-charger
A LiIon/LiFePo/NiMH Charger Backpack for the CircuitMess Chatter v2


It measures 87.7 × 68.7 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the ATMEGA328PB-AU and TPS61200DRC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jmov/T-AIM-KiCAD-Project repository on GitHub, at the commit this page was made from: the board is T-AIM.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).