2 layers152.7 × 141.2 mm
2 layers152.7 × 136.2 mm
HybridBoxNew
jmjass/Cubstraption3Hybrid Box/GCC Controller for Super Smash Brothers
- Size
- 152.7 × 136.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 52
- Pads
- 356
- Tracks, vias
- 429, 59
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Apr 2024
- Updated
- 19 Nov 2025
Overview
HybridBoxNew is an open-source printed circuit board by jmjass, from the jmjass/Cubstraption repository on GitHub. It is a 2-layer board of 152.7 × 136.2 mm with 67 parts on 52 nets, routed with 429 tracks and 59 vias.
It is built around the RP2040, W25Q128JVSIQ and X05A26H12G, with the XC6206-2.8V among its other parts. Its parts include 26 switches, 16 capacitors, 7 resistors, 5 ICs and 2 diodes. It belongs with the RP2040 boards of this library.
Main components
4
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
X05A26H12G
SMD,P=0.5mm,卧贴-40℃~+85℃ 0.3mm 0.5mm 12P 2.6mm Double-Sided Contacts, Top and Bottom Entry Gold Hinged Lid Phosphor bronze Surface Mount, Right Angle SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSXKB ConnectionFFC, FPC (Flat Flexible) Connector Assemblies
XC6206-2.8V
SOT-23-3L-40℃~+85℃@(Ta) 1 1uA 2.8V 250mA 350mV@(30mA) 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdCubstraption
Hybrid Box/GCC Controller for Super Smash Brothers
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | MX_SW_HS | marbastlib-mx:SW_MX_HS_1u | SW13, SW14, SW16, SW18, SW21, SW22, SW24, SW26, SW32, SW34, SW36, SW39, SW40 |
| 13 | MX_SW_solder | marbastlib-mx:SW_MX_1u | SW12, SW15, SW17, SW19, SW20, SW23, SW25, SW27, SW33, SW35, SW37, SW38, SW41 |
| 9 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C5, C6, C12, C13, C14, C15, C16, C17 |
| 7 | MountingHole | MountingHole:MountingHole_2.2mm_M2_ISO14580_Pad | H5, H6, H7, H7, H7, H8, H8 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4, C10 |
| 2 | , | ||
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C7, C8 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | X05A26H12G | footprint:FPC-SMD_X05A26H12G | U2, U5 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 5.6k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | RP2040 | qw-footprints:RP2040-QFN-56 | U3 |
| 1 | Schottky Diode | Diode_SMD:D_SOD-123 | D1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4 |
| 1 | XC6206 | Package_TO_SOT_SMD:SOT-23 | U1 |
More from jmjass/Cubstraption
1Similar boards
- 2 layers172 × 107.7 mm
- 2 layers33.1 × 114.3 mm
Vbox mobo
CarVac/vbox
A rectangle controller for Melee with buttons arranged vertically instead of on a flat surface
74 parts6 - 2 layers253.3 × 113.3 mm
- 2 layers344.7 × 123.6 mm
- 2 layers288.8 × 160.1 mm
GRAM SLIM
GRAMCTRL/GRAM-SLIM
Open source low-profile leverless design with an integrated RP2040.
64 parts24GPL-3.0 - 2 layers347 × 156.5 mm
Integrated OF1
quark-works/Integrated-OF1
Design files are available in this repository. Production files for JLCPCB in the releases page. Tested working and fitting previously mentioned Frame 1 cases.
81 parts11MIT - 2 layers203.3 × 221.2 mm
Panelized Board
GRAMCTRL/GRAM-PRISM
A modular and scalable design based on WunWae's Prism Controller
87 parts10GPL-3.0 - 2 layers38.1 × 49.2 mm
OpenRectangleTemplate
quark-works/OpenRectangleTemplate
RP2040 template for use with box style controllers for the GC
40 parts9MIT
Questions
How big is the HybridBoxNew PCB?
It measures 152.7 × 136.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HybridBoxNew use?
67 parts, built around the RP2040, W25Q128JVSIQ, X05A26H12G and XC6206-2.8V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HybridBoxNew KiCad files?
From the jmjass/Cubstraption repository on GitHub, at the commit this page was made from: the board is KiCadFiles/HybridBoxNew.kicad_pcb and its schematic KiCadFiles/Buttons.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HybridBoxNew design in my own project?
Its repository states no licence, so its author keeps all rights: ask jmjass before reusing the design.