

Mcu stm32h725
- Size
- 68.6 × 18 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 66
- Pads
- 230
- Tracks, vias
- 0, 0
- Pours
- 2
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Jun 2026
- Updated
- 23 Jul 2026
Overview
Mcu stm32h725 is an open-source printed circuit board by jlaustill, from the jlaustill/gdh-electric repository on GitHub, published under the CC0-1.0 licence. It is a 4-layer board of 68.6 × 18 mm with 38 parts on 66 nets.
It is built around the STM32H725RGV3, TLV62569DBVR-TP and USB6B1RL. Its parts include 21 capacitors, 6 resistors, 4 ICs, 3 connectors and 2 inductors. It belongs with the STM32 boards of this library.
Main components
3STM32H725RGV3
VFQFPN-68(8x8)ARM Cortex-M7 VFQFPN-68(8x8) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TLV62569DBVR-TP
SOT-23-51 1.5MHz 2.7V~5.5V 2A 40uA Adjustable Buck Built-in No SOT-23-5 DC-DC Converters ROHSTECH PUBLICDC-DC ConvertersUSB6B1RL
SOP-8-55℃~+125℃ 18V 25A@8/20us 2uA 450W@8/20us 5V 5pF 6V ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOP-8 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C6, C7, C9, C11, C12, C13, C14, C17, C18, C21 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C4, C8, C10 |
| 2 | 2.2uH | Inductor_SMD:L_1210_3225Metric | L1, L2 |
| 2 | 27pF | Capacitor_SMD:C_0402_1005Metric | C19, C20 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C1, C15 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 220pF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 25MHz | mcu-stm32h725:CRYSTAL-SMD_4P-L3.2-W2.5-BL | Y1 |
| 1 | 453k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 600R@100MHz | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | STM32H725RGV3 | mcu-stm32h725:QFN-68_L8.0-W8.0-P0.40-BL-EP6.4 | U3 |
| 1 | Side A | mcu-stm32h725:Castellation_1x27_P2.54mm_Edge | J2 |
| 1 | Side B | mcu-stm32h725:Castellation_1x27_P2.54mm_Edge | J3 |
| 1 | TLV62569DBVR | mcu-stm32h725:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U2 |
| 1 | TPS2116DRLR | mcu-stm32h725:SOT-583-8_L2.1-W1.6-P0.50-LS1.6-BL | U4 |
| 1 | USB-C | mcu-stm32h725:USB-C_HYP_TC020-24LB02R_C23376530 | J1 |
| 1 | USB6B1RL | mcu-stm32h725:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U1 |
More from jlaustill/gdh-electric
1- 4 layers68.6 × 18 mm

Similar boards
- 4 layers42 × 42 mm

- 4 layers91 × 62 mm

- 4 layers431.5 × 125.5 mm

Clavier
lsartory/Clavier
An FPGA-based mechanical keyboard with an integrated USB hub and communication interfaces
344 parts212 - 2 layers35 × 45 mm

Aether
EnriqueNeyra/aether
All-in-one home air quality monitor measuring Temp, Humidity, CO2, VOCs, Particulate Matter, and NOx. Powered by ESP32-C3 running esphome, and built with Home Assistant integration
57 parts129 - 6 layers112 × 98 mm

- 6 layers100 × 120 mm

Astra piNas
jlcjak/astra_piNas
Six-layer CM5 Lite dual-NVMe carrier with PCIe switch, Ethernet, microSD, USB-C PD and PoE. Review design; fabrication hold documented.
176 parts30 - 6 layers39.5 × 39.5 mm

P4eregrine
anticitizn/p4eregrine
All-in-one ESP32 P4-based drone ESC, flight controller, and video processor
359 parts21 - 4 layers100 × 80 mm

Questions
How big is the Mcu stm32h725 PCB?
It measures 68.6 × 18 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Mcu stm32h725 use?
38 parts, built around the STM32H725RGV3, TLV62569DBVR-TP and USB6B1RL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mcu stm32h725 KiCad files?
From the jlaustill/gdh-electric repository on GitHub, at the commit this page was made from: the board is modules/mcu-stm32h725/v0.0.1/mcu-stm32h725.kicad_pcb and its schematic modules/mcu-imxrt1062/v0.0.1/mcu-imxrt1062.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mcu stm32h725 design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).