
WaDAR Tag V1 2
jlab-sensing/RF-Backscatter-PCB-V1
This repo consists of the backscatter tag PCBs used with the WaDAR sensing system. This repo is a submodule of WaDAR. This is our first version of the tag used in WaDAR's sensing system.

This repo consists of the backscatter tag PCBs used with the WaDAR sensing system. This repo is a submodule of WaDAR. This is our first version of the tag used in WaDAR's sensing system.
WaDAR Tag V1 0 is an open-source printed circuit board by jlab-sensing, from the jlab-sensing/RF-Backscatter-PCB-V1 repository on GitHub. It is a 2-layer board of 20.2 × 24.7 mm with 13 parts on 8 nets, routed with 39 tracks and 3 vias.
It is built around the SIT1534AI-H4-DCC-00.001E, CBR04C101J3GAC and SMA-J-P-H-RA-TH1. Its parts include 4 capacitors, 2 ICs and 1 connector.
This repo consists of the backscatter tag PCBs used with the WaDAR sensing system. This repo is a submodule of WaDAR. This is our first version of the tag used in WaDAR's sensing system.
Each version is archived upon PCB fabrication and assembly, ensuring traceability and reproducibility of hardware iterations.
This README will be updated as more information becomes available.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | GND | JLab_FP:EpicTestPointV1 | GND, GND, GND |
| 2 | GJM1555C1H330JB01D | WADARfootprints:CAPC10555_55N_KEM | C2, C4 |
| 1 | CBR04C101J3GAC | WADARfootprints:CAPC10555_55N_KEM | C1 |
| 1 | CBR04C101J3GAC | JLab_FP:CAPC10555_55N_KEM | C3 |
| 1 | CLK_OUT | JLab_FP:EpicTestPointV1 | C_O |
| 1 | OUTPUT2 | JLab_FP:EpicTestPointV1 | O2 |
| 1 | SIT1534AI-H4-DCC-00.001E | WADARfootprints:XTAL4_SiT1533_SIT | U1 |
| 1 | SMA-J-P-H-RA-TH1 | WADARfootprints:CONN_SMA-J-P-H-RA-TH1_SAI | J1 |
| 1 | VDD | JLab_FP:EpicTestPointV1 | VDD |
| 1 | ~ | JLab_FP:SKY13351_FP | U2 |

jlab-sensing/RF-Backscatter-PCB-V1
This repo consists of the backscatter tag PCBs used with the WaDAR sensing system. This repo is a submodule of WaDAR. This is our first version of the tag used in WaDAR's sensing system.

jlab-sensing/RF-Backscatter-PCB-V1
This repo consists of the backscatter tag PCBs used with the WaDAR sensing system. This repo is a submodule of WaDAR. This is our first version of the tag used in WaDAR's sensing system.

SETIatHCRO/Front-Page
Documentation related to the Allen Telescope Array at the Hat Creek Radio Observatory Wiki Link Below


Aharoni-Lab/MiniCAM
Using the Miniscope Software, multiple Miniscopes and MiniCAMs can be connected, streamed, and time-sync'ed recording simultaniously.

Aharoni-Lab/Miniscope-Wire-Free-DAQ
All information, guides, and tutorials can be found on the Miniscope-Wire-Free-DAQ Wiki Page .




timothy-joseph/timotelemetry_timounu
Formula Student Telemetry system I've developed in my first year of University at UPB Drive
It measures 20.2 × 24.7 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the SIT1534AI-H4-DCC-00.001E, CBR04C101J3GAC and SMA-J-P-H-RA-TH1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jlab-sensing/RF-Backscatter-PCB-V1 repository on GitHub, at the commit this page was made from: the board is WaDAR_Tag_V1_0/WaDAR_Tag_V1_0.kicad_pcb and its schematic WaDAR_Tag_V1_0/WaDAR_Tag_V1_0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jlab-sensing before reusing the design.