
Solderin Station
kr4fty/DiySolderingStation
Diy Soldering Stations with Atmega (Arduino UNO). Firmware and hardware design included

KiCAD design for camera switch project
Camera switch is an open-source printed circuit board by jjthrash, from the jjthrash/camera-switch-kicad repository on GitHub. It is a 2-layer board of 46.1 × 45.2 mm with 27 parts on 27 nets, routed with 162 tracks and 3 vias.
It is built around the ATMEGA328P-PU and LM7805CT. Its parts include 7 connectors, 5 resistors, 4 capacitors, 3 ICs and 2 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R2, R3, R6, R7 |
| 4 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P1, P2, P5, P7 |
| 4 | MountingHole_3.2mm_M3 | Mounting_Holes:MountingHole_3.2mm_M3 | , , , |
| 2 | 0.1uF | Capacitors_ThroughHole:C_Disc_D6_P5 | C3, C4 |
| 2 | 22pF | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C1, C2 |
| 2 | Q_NPN_CBE | TO_SOT_Packages_THT:TO-92_Inline_Narrow_Oval | Q3, Q4 |
| 1 | 16MHz | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | 1k | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1 |
| 1 | ATMEGA328P-P | Housings_DIP:DIP-28_W7.62mm | IC1 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P6 |
| 1 | CONN_01X07 | Pin_Headers:Pin_Header_Straight_1x07 | P3 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | P8 |
| 1 | D | Diodes_ThroughHole:Diode_DO-41_SOD81_Horizontal_RM10 | D1 |
| 1 | JACK_TRS_5PINS | footprints:audio_jack | U2 |
| 1 | LM7805CT | Power_Integrations:TO-220 | U1 |

kr4fty/DiySolderingStation
Diy Soldering Stations with Atmega (Arduino UNO). Firmware and hardware design included

mattbooks/alarm-clock
An alarm clock built from scratch (ish) that fades lights on

EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.

ThomasVDD/SmartSupply
SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.

DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.

balmerdx/BalmerDX_VNA
Vector Network Analyzer 10 KHz - 180 MHz


profdc9/ParanoiaBox
A standalone elliptic curve/AES file encryption and decryption device
It measures 46.1 × 45.2 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the ATMEGA328P-PU and LM7805CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jjthrash/camera-switch-kicad repository on GitHub, at the commit this page was made from: the board is camera-switch.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jjthrash before reusing the design.