
Alarm clock
mattbooks/alarm-clock
An alarm clock built from scratch (ish) that fades lights on

An alarm clock built from scratch (ish) that fades lights on
Alarm clock old is an open-source printed circuit board by mattbooks, from the mattbooks/alarm-clock repository on GitHub, published under the MIT licence. It is a 2-layer board of 68.6 × 86.4 mm with 36 parts on 44 nets, routed with 287 tracks and 30 vias.
It is built around the ATMEGA328P-PU, DS1307Z+ and LM7805CT. Its parts include 14 resistors, 4 capacitors, 4 ICs, 3 connectors and 2 diodes. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 2.2k | Resistors_SMD:R_1210_HandSoldering | R3, R4, R6, R7, R8, R9, R10, R11, R12, R13, R14 |
| 2 | 20pF | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C5, C6 |
| 2 | 3.3k | Resistors_SMD:R_1210_HandSoldering | R1, R2 |
| 2 | BARREL_JACK | custom:BARREL_JACK | CON1, CON2 |
| 2 | Q_NPN_BCE | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1, Q2 |
| 2 | push_button | Buttons_Switches_THT:SW_PUSH-12mm | PB1, PB2 |
| 1 | 10µF | Capacitors_ThroughHole:C_Radial_D6.3_L11.2_P2.5 | C1 |
| 1 | 16MHz | Crystals:Crystal_HC49-U_Vertical | Y2 |
| 1 | 1µF | Capacitors_ThroughHole:C_Radial_D5_L11_P2 | C3 |
| 1 | 270 | Resistors_SMD:R_1210_HandSoldering | R5 |
| 1 | 38.7kHz | Crystals:Crystal_Round_Horizontal_2mm | Y1 |
| 1 | 3V | custom:CR2032_SMD | BT1 |
| 1 | 4Dig7Seg | custom:4Dig7Seg | U3 |
| 1 | ATMEGA328P-PU | Housings_DIP:DIP-28_W7.62mm_Socket | IC1 |
| 1 | BUZZER | Buzzers_Beepers:Buzzer_12x9.5RM7.6 | SP1 |
| 1 | D | Diodes_THT:Diode_DO-41_SOD81_Horizontal_RM10 | D1 |
| 1 | DS1307 | Housings_DIP:DIP-8_W7.62mm_LongPads | U2 |
| 1 | LED | LEDs:LED_D5.0mm | D2 |
| 1 | LM7805CT | Power_Integrations:TO-220 | U1 |
| 1 | PROGRAMMER | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | P1 |
| 1 | SPST | Buttons_Switches_THT:SW_Micro_SPST | SW1 |

mattbooks/alarm-clock
An alarm clock built from scratch (ish) that fades lights on

evarty/KiCADPCB
This is the PCB design for various projects. Some have associated uC code, but that is seperate. There are seperate repos for some projects under evarty. A number of these have GCode as well.

NicolasSchkurko/Controlador_Termotanque_Solar_PF_ISJ
Controlador de termotanque solar: ATmega328P maestro + ESP8266 WiFi, con interfaz fisica LCD y web, programacion horaria y guardado en EEPROM. Proyecto Final de 6.º año, Instituto San Jose A-355 (2022).


kr4fty/DiySolderingStation
Diy Soldering Stations with Atmega (Arduino UNO). Firmware and hardware design included



agranlund/raven
Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
It measures 68.6 × 86.4 mm and has 2 copper layers, 1.6 mm thick.
36 parts, built around the ATMEGA328P-PU, DS1307Z+ and LM7805CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mattbooks/alarm-clock repository on GitHub, at the commit this page was made from: the board is hardware/alarm-clock-old.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).