
Canned ICs-1.2
Jipxmaster/Canned-ICs-1.2
"Chips Enlatados" es un proyecto en la que intento colocar el mayor número de integrados de la serie 7400 en el menor espacio posible.

Son archivos viejos que tengo -El compilador es un ejecutable que usa el archivo config -EL archivo de la computadora está en formato .circ para logisim -Correr la simulación a 4096 Hz, es muy lento
Rev 1.0 Release is an open-source printed circuit board by Jipxmaster, from the Jipxmaster/CannedICs-Assembly repository on GitHub. It is a 2-layer board of 99.1 × 99.1 mm with 69 parts on 107 nets, routed with 1,910 tracks and 163 vias.
It is built around the 74LS574N, 74LS161DC and 74LS04PC, with the 74LS32SC, 74LS74PC and BAT42 among its other parts. Its parts include 20 resistors, 19 capacitors, 18 ICs, 3 diodes and 2 connectors.
Son archivos viejos que tengo -El compilador es un ejecutable que usa el archivo config -EL archivo de la computadora está en formato .circ para logisim -Correr la simulación a 4096 Hz, es muy lento
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1, R2, R3, R4, R5, R6, R7, R12, R13, R14, R15, R16, R17, R18, R19, R20 +2 |
| 18 | C | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C1, C2, C3, C4, C5, C6, C7, C10, C11, C12, C13, C14, C15, C16, C17, C18 +2 |
| 6 | 74LS574 | Package_DIP:DIP-20_W7.62mm | U1, U6, U7, U8, U15, U16 |
| 4 | 74LS161 | Package_DIP:DIP-16_W7.62mm | U9, U10, U11, U12 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380 | H1, H2, H3, H4 |
| 2 | 74LS283 | Package_DIP:DIP-16_W7.62mm | U17, U18 |
| 2 | BAT42 | Diode_THT:D_DO-35_SOD27_P2.54mm_Vertical_AnodeUp | D2, D3 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R10 |
| 1 | 28C256 | Package_DIP:DIP-28_W15.24mm | U13 |
| 1 | 74LS04 | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | 74LS244 | Package_DIP:DIP-20_W7.62mm | U5 |
| 1 | 74LS32 | Package_DIP:DIP-14_W7.62mm | U3 |
| 1 | 74LS74 | Package_DIP:DIP-14_W7.62mm | U4 |
| 1 | C | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C20 |
| 1 | CY62256-70PC | Package_DIP:DIP-28_W15.24mm | U14 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x20_Female | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J1 |
| 1 | LED | LED_THT:LED_D3.0mm_Clear | D1 |
| 1 | LOGO | Library:Canned ICs logo | G*** |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R11 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | X MHz | Crystal:Crystal_HC18-U_Vertical | Y1 |

Jipxmaster/Canned-ICs-1.2
"Chips Enlatados" es un proyecto en la que intento colocar el mayor número de integrados de la serie 7400 en el menor espacio posible.




lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller



clemarfolly/Microdigital-TK2000
Reprodução da PCB do TK-2000 da Microdigital, clone do Micro-Professor MPF-II
It measures 99.1 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
69 parts, built around the 74LS574N, 74LS161DC, 74LS04PC and 74LS32SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Jipxmaster/CannedICs-Assembly repository on GitHub, at the commit this page was made from: the board is Rev 1.0 Release/Schematic/Schematic.kicad_pcb and its schematic Rev 1.0 Release/Schematic/Control Unit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Jipxmaster before reusing the design.