Skip to the content
2 layers63.5 × 69.3 mmTurtlePico, the printed circuit board in 3D

The development board making electronics work easier and more widely

Size
63.5 × 69.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
47
Nets
68
Pads
252
Tracks, vias
341, 28
Pours
3
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
28 Jul 2023
Updated
29 Sep 2026

Overview

TurtlePico is an open-source printed circuit board by Jin-Neuron, from the Jin-Neuron/Turtle-Pico repository on GitHub. It is a 2-layer board of 63.5 × 69.3 mm with 47 parts on 68 nets, routed with 341 tracks and 28 vias.

It is built around the PCM5102APW. Its parts include 15 connectors, 10 capacitors, 8 resistors, 3 ICs and 2 transistors. It belongs with the RP2040 boards of this library.

Main components

1

README

README.md
English | 日本語

Turtle Pico - 配線いらずで、本格的な電子工作を -

Turtle Pico

こんにちは!皆さんは、電子工作でのお困りごとを、どのように解決しますか?

煩雑な配線、難しいプログラミングと困難な環境構築、毎回確認が面倒なピン配置...などなど、電子工作を楽しんでいると、いくつもの壁に突き当たります。

そんな課題を克服できるようにと開発したのが、このTurtle Pico マイコンボード。ブレッドボードすら不要で、コネクタに直接部品を接続するだけで回路が完成します。内部にはRaspberry Pi Pico Wを搭載しているので、プログラミングにはMicroPythonを使用でき、更にリソースにも困りません!

コネクタに超音波センサを指すと、その容姿はまるで亀のようで、その容姿から「Turtle Pico」とボードを名付けました。

ボードの詳細仕様は、 Turtle Pico 仕様書をご覧ください!

本PJは現在、製品化に向けて準備中です。

Turtle Pico 製品パッケージ

alt text

Turtle Picoは、画像のようなパッケージに収納されています。

alt text

中を開けるとこのようになっていて、本体と外箱の寸法は画像に記載のとおりです。黄色が外箱、ピンクが本体の寸法です。

パッケージの中に、更にTurtle Pico本体がありますが、本体は基板をオリジナル3Dプリンタ製カバーで覆うような形状をしています。USBやMicroSDカードなどのコネクタポートがロゴで表示されています。

それぞれの意味は、Turtle Pico 仕様書 にてご確認ください。

alt text

Turtle Picoは本体カバーの色でカラーバリエーションが4色あり、ピンク色、緑色、グレー、空色となっています。

Turtle Pico ワクワク作例ブック

Recipes

製品化モデルでは、上記の作例集が付属します。ソースコードを exampleに掲載している、TurtlePico作例の数々の作り方を掲載しています。

ここでは、作例集に掲載している、いくつかのTurtle Picoの仲間たちをご紹介しましょう。

alt text

画像左上は4脚でよちよちと歩くロボット「Turtle Pico Robot」で、サーボモータの回転で歩きます。その右側にあるのはドローン「Turtle Pico Drone」、更にその下にはマイコンカー「Turtle Pico Car」があります。

これらは、上に乗せるものを変えたり、様々な制御を追加することで、いろいろな応用が効きそうです。ぜひ、作例集を参考に、自分専用のアプリケーションに仕上げてください!

画像左下には、Turtle Picoをサウンドカードにしてスピーカーで音楽を流している作例です。Turtle Picoに搭載されているPCM5102AというオーディオDACは、32bit / 192kHzにも対応しているため、ハイレゾ音源も流せるパワフルなオーディオDACとなります。

従って、TurtlePicoは、公式にあるサウンドカードのファームウェアを使用すれば、周囲にアンプやスピーカーをつないで、クラフトオーディオを楽しむことができるボードにもなります。

作例集では、これら作例の作り方を始めとし、応用の仕方を設計からデバッグまで、最近の「バイブコーディング」でかんたんに行う製作方法を解説しています。Turtle Picoをお買い上げいただければ、セット担っているので、ぜひお買い求めください!

License

本公式リポジトリは、複数のライセンスにて構成されています。

LICENSE Fileにてご確認ください。

Parts

47
QtyValueFootprintReferences
410µCapacitor_SMD:CP_Elec_4x5.4C5, C6, C7, C8
31kResistor_SMD:R_0603_1608MetricR2, R3, R7
20.01µCapacitor_SMD:C_0603_1608MetricC1, C2
20.1uCapacitor_SMD:C_0603_1608MetricC9, C10
22.2µCapacitor_SMD:C_0603_1608MetricC3, C4
22SC4213Package_TO_SOT_SMD:SOT-323_SC-70Q1, Q2
250kResistor_SMD:R_0603_1608MetricR5, R6
25kResistor_SMD:R_0603_1608MetricR1, R4
2LEDConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ3, J4
2SW_PushSW_SKRPACE010:SW_SKRPACE010SW1, SW2
12kResistor_SMD:R_0603_1608MetricR8
19DoFConnector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_HorizontalJ5
1AudioJack3STX-3000:STX3000J2
1DRV8835DSSRDRV8835:DRV8835DSSRIC1
1FL_ESCConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ13
1FR_ESCConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ12
1LMotorConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ10
1LOGOJinPro:JinNeuron_LogoG***
1LOGOPCBWay:PCBWayG***
1LOGOTurtlePico:TurtlePicoG***
1Micro_SDConnector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5J11
1OLEDConnector_JST:JST_XH_S7B-XH-A_1x07_P2.50mm_HorizontalJ8
1PCM5102APackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU1
1PicoRPi_Pico:RPi_Pico_SMD_THU2
1RL_ESCConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ15
1RMotorConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ9
1RR_ESCConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_HorizontalJ14
1TemperatureConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ6
1USB-CNELTRON_5077CR-16SMC2-BK-TR:NELTRON_5077CR-16SMC2-BK-TRJ1
1UltraSonicConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ7

The 43 most common of 47 parts.

More from Jin-Neuron/Turtle-Pico

3
  • 2 layers63.5 × 69.3 mmTurtlePico Leatherback, the printed circuit board in 3D

    TurtlePico Leatherback

    Jin-Neuron/Turtle-Pico

    The development board making electronics work easier and more widely

    127 parts1
  • 4 layers63.5 × 99.3 mmTurtlePico, the printed circuit board in 3D

    TurtlePico

    Jin-Neuron/Turtle-Pico

    The development board making electronics work easier and more widely

    49 parts1
  • 2 layers63.5 × 69.3 mmTurtlePico nw, the printed circuit board in 3D

    TurtlePico nw

    Jin-Neuron/Turtle-Pico

    The development board making electronics work easier and more widely

    46 parts1

Similar boards

  • 6 layers243.8 × 243.8 mmRaven, the printed circuit board in 3D

    Raven

    agranlund/raven

    Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

    331 parts87
  • 2 layers54 × 60.5 mmTape, the printed circuit board in 3D

    Tape

    jrowny/mixtape2

    My second iteration of a cassette-style mp3 player

    38 parts82MIT
  • 2 layers140 × 170 mmCdi, the printed circuit board in 3D

    Cdi

    ThroatyMumbo/NESCD

    An unofficial CD drive add-on for the NES.

    28 parts78MIT
  • 2 layers232 × 134 mmType2 v2, the printed circuit board in 3D

    Type2 v2

    Alxdreee/TYPE-2

    Touch-capacitive polyphonic synthesizer powered by ESP32-S3

    18 parts68GPL-3.0
  • 2 layers55 × 100 mmESP32AY revD2, the printed circuit board in 3D

    ESP32AY revD2

    djspawnbrest/ESP32AY

    ZxPod - ESP32 based AY multiformat player

    138 parts59GPL-3.0
  • 2 layers76 × 63.5 mmPicoTracker, the printed circuit board in 3D

    PicoTracker

    xiphonics/picoTracker-pcb

    Buy the official kit at xiphonics store # Trademark Notice

    98 parts36CC0-1.0
  • 4 layers40 × 100 mmJPL.mp3, the printed circuit board in 3D

    JPL.mp3

    jpetkauskas/JPL.mp3

    Files for ESP32 based MP3 player

    72 parts33
  • 2 layers58.8 × 55.7 mmAiO i2s DAC, the printed circuit board in 3D

    AiO i2s DAC

    martinroger/ipodesp32

    An iPod emulator for 2006-2013 BMW Mini Coopers that need Bluetooth

    102 parts24MIT

Questions

How big is the TurtlePico PCB?

It measures 63.5 × 69.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TurtlePico use?

47 parts, built around the PCM5102APW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TurtlePico KiCad files?

From the Jin-Neuron/Turtle-Pico repository on GitHub, at the commit this page was made from: the board is board/main/TurtlePico.kicad_pcb and its schematic board/advanced/Audio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the TurtlePico design in my own project?

Its repository states no licence, so its author keeps all rights: ask Jin-Neuron before reusing the design.