
Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

Firmware for an automatic irrigation device.
Automatic Irrigation System is an open-source printed circuit board by JIMS-Innovations, from the JIMS-Innovations/Automatic-Irrigation-System repository on GitHub. It is a 2-layer board of 100.3 × 86.1 mm with 18 parts on 48 nets, routed with 145 tracks and 16 vias.
It is built around the ATMEGA32U4. Its parts include 5 resistors, 5 connectors, 3 diodes, 2 ICs and 1 capacitor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Firmware for an automatic irrigation device.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 220R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Bourns_3266Y_Vertical | RV1 |
| 1 | 10u | Capacitor_THT:C_Radial_D5.0mm_H5.0mm_P2.00mm | C1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 5V Input | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | ATmega32 | Package_DIP:DIP-40_W15.24mm | U1 |
| 1 | Dry | LED_THT:LED_D5.0mm | D2 |
| 1 | ISP | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J5 |
| 1 | Moist | LED_THT:LED_D5.0mm | D3 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U2 |
| 1 | Pump | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | Pumping | LED_THT:LED_D5.0mm | D1 |
| 1 | Soil Moisture Sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | UART Debug | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | WC1602A | Display:WC1602A | DS1 |

joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware



evyd13/gh80-series
GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)



It measures 100.3 × 86.1 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the ATMEGA32U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JIMS-Innovations/Automatic-Irrigation-System repository on GitHub, at the commit this page was made from: the board is Hardware/Automatic Irrigation System/Automatic Irrigation System.kicad_pcb and its schematic Hardware/Automatic Irrigation System/Automatic Irrigation System.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JIMS-Innovations before reusing the design.