
HD6309 computer
trcwm/HD6309-Computer
A computer based on the HD6309 CPU, done for the Retro Challenge 2017/04.

DragonATXProtoCPUSAMx8ROM is an open-source printed circuit board by jimbro1000, from the jimbro1000/DragonATXProtoCPUSAMx8ROM repository on GitHub. It is a 2-layer board of 153.1 × 84.1 mm with 22 parts on 132 nets, routed with 1,310 tracks and 273 vias.
It is built around the HD63C09ERP and 74LS02PC. Its parts include 7 capacitors, 7 ICs and 6 resistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 4K7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5 |
| 1 | 100n | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C61 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C5 |
| 1 | 14.31818MHz | Crystal:Crystal_HC49-U_Vertical | XL1 |
| 1 | 1K5 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 1uF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C3 |
| 1 | 22pF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C1 |
| 1 | 28C256 | Library:PLCC-32_THT-Socket | U4 |
| 1 | 33pF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C2 |
| 1 | 47p | Capacitor_THT:C_Disc_D6.0mm_W2.5mm_P5.00mm | C67 |
| 1 | 4u7 | Capacitor_THT:CP_Radial_Tantal_D4.5mm_P2.50mm | C64 |
| 1 | 6883 | Package_DIP:DIP-40_W15.24mm_Socket | IC39 |
| 1 | 74LS02 | Package_DIP:DIP-14_W7.62mm | IC4 |
| 1 | 74LS08 | Package_DIP:DIP-14_W7.62mm | IC11 |
| 1 | 74LS138 | Package_DIP:DIP-16_W7.62mm | IC3 |
| 1 | 74LS244 | Package_DIP:DIP-20_W7.62mm_Socket | IC25 |
| 1 | HD63C09 | Library:PLCC-44_THT-Socket | IC1 |
| 1 | ~ | Library:Card_Edge | PL1 |

trcwm/HD6309-Computer
A computer based on the HD6309 CPU, done for the Retro Challenge 2017/04.


baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.


danwerner21/vic2020
A Vic-20 clone created with [almost] all readily available parts


RetroStack/TRS-80-Model-I-G-E1
Hardware Replica of the TRS-80 Model I Revision G
It measures 153.1 × 84.1 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the HD63C09ERP and 74LS02PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jimbro1000/DragonATXProtoCPUSAMx8ROM repository on GitHub, at the commit this page was made from: the board is DragonATXProtoCPUSAMx8ROM.kicad_pcb and its schematic DragonATXProtoCPUSAMx8ROM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jimbro1000 before reusing the design.