4 layers130 × 25 mm
Current sense
westonb/little-bee-B1
A high performance current & magnetic field probe
113 parts331CC-BY-SA-4.0
2 layers69.7 × 32.8 mm
D32Rev3ConfigController
jimbro1000/D32Rev3ConfigControllerRemote Configuration Control for Rev 3 Dragon
- Size
- 69.7 × 32.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 48
- Pads
- 105
- Tracks, vias
- 183, 36
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Sep 2025
- Updated
- 11 Sep 2025
Overview
D32Rev3ConfigController is an open-source printed circuit board by jimbro1000, from the jimbro1000/D32Rev3ConfigController repository on GitHub. It is a 2-layer board of 69.7 × 32.8 mm with 21 parts on 48 nets, routed with 183 tracks and 36 vias.
It is built around the TMUX1219DBV. Its parts include 4 capacitors, 4 diodes, 3 ICs, 3 connectors and 1 switch.
Main components
1Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 22nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4 |
| 4 | D_Schottky | PCM_Diode_SMD_AKL:D_SOD-323 | D1, D2, D3, D4 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965 | H1, H2, H3, H4 |
| 3 | TMUX1219 | PCM_Package_TO_SOT_SMD_AKL:SOT-23-6_BigPads | U2, U3, U4 |
| 2 | 4x10K | PCM_Resistor_SMD_AKL:R_Array_Concave_4x0603 | RN1, RN2 |
| 1 | Config | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Horizontal | J1 |
| 1 | EN16ABVM22 | Library:Untitled | SW1 |
| 1 | IO-side1 | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J2 |
| 1 | IO-side2 | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J3 |
Questions
How big is the D32Rev3ConfigController PCB?
It measures 69.7 × 32.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the D32Rev3ConfigController use?
21 parts, built around the TMUX1219DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the D32Rev3ConfigController KiCad files?
From the jimbro1000/D32Rev3ConfigController repository on GitHub, at the commit this page was made from: the board is D32Rev3ConfigController.kicad_pcb and its schematic D32Rev3ConfigController.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the D32Rev3ConfigController design in my own project?
Its repository states no licence, so its author keeps all rights: ask jimbro1000 before reusing the design.
Similar boards
- 2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm
QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm
