Skip to the content
2 layers163.8 × 157.8 mmPower, the printed circuit board in 3D

It is required to change settings using SCLManager.exe when required for new setup.

Size
163.8 × 157.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
39
Pads
189
Tracks, vias
265, 19
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
10 Apr 2023
Updated
7 Nov 2026

Overview

Power is an open-source printed circuit board by jibonaronno, from the jibonaronno/documentsA repository on GitHub. It is a 2-layer board of 163.8 × 157.8 mm with 31 parts on 39 nets, routed with 265 tracks and 19 vias.

It is built around the ATMEGA128A-AU, ULN2003A and PN2222A. Its parts include 10 resistors, 5 capacitors, 5 ICs, 3 connectors and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

3

README

README.md

PDA IEC-61850 References

  1. LU_102_A Backup
  2. LU_104_A Backup
  3. ClientProc executable with SA_Client.ini and YH.cid files Backup
  4. SclManager Backup

SA_Client.ini has following configs:

ini
LocalIp=192.168.10.105
...
...
PATH=D:/develop/MZAutomation/SAProgram/ClientProc_2017_Dev_NoTimer_Minsu/ClientProc/61850_CFG/CFG/61850/SA_CFG
SAVE_PATH =D:/develop/MZAutomation/SAProgram/ClientProc_2017_Dev_NoTimer_Minsu/ClientProc/61850_CFG/LOG/61850
ENG_PATH =D:/develop/MZAutomation/SAProgram/ClientProc_2017_Dev_NoTimer_Minsu/ClientProc/61850_CFG/DB/ied_info_gw.csv

These configurations should be changed if machine or location is changed.

It is required to change settings using SCLManager.exe when required for new setup.

NO IMAGE

Confluence Pages From PDA ACQ Operation and calculation / Integration of various current values Copy of 차단기 동작 특성 페이지 https://jlee193.atlassian.net/wiki/spaces/PDA/pages/514129921/Copy+of

Bushing Documentation Page From PDA 부싱 누설 전류 페이지 https://jlee193.atlassian.net/wiki/spaces/PDA/pages/296812597

An Initial Concept of hardware pptx file downloaded in Confluence folder 종합예방진단시스템(20210625)_HW팀.pptx 하드웨어 구성 https://jlee193.atlassian.net/wiki/spaces/PDA/pages/154042616

Parts

31
QtyValueFootprintReferences
53K3Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR11, R13, R19, R20, R22
3CPCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC4, C5, C8
222KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR14, R15
2C_SmallCapacitor_THT:C_Disc_D7.5mm_W5.0mm_P5.00mmC6, C7
2Conn_01x12Connector_Phoenix_MC_HighVoltage:PhoenixContact_MC_1,5_12-G-5.08_1x12_P5.08mm_HorizontalJ1, J2
2PC817Package_DIP:DIP-4_W7.62mmU4, U5
2SANYOU_SRD_Form_CRelay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_CK3, K4
1100EResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR12
110KPotentiometer_THT:Potentiometer_Bourns_3005_HorizontalRV2
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR21
175KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR23
1ATmega128A-AUHeatEx03:TQFP64.BreakU1
1BUZZER-PTHElectromechanical:BUZZER-12MMLS1
1Conn_01x02Connector_Phoenix_MC_HighVoltage:PhoenixContact_MC_1,5_2-G-5.08_1x02_P5.08mm_HorizontalJ3
1D_SmallDiode_THT:D_DO-27_P15.24mm_HorizontalD2
1D_SmallDiode_THT:D_DO-15_P10.16mm_HorizontalD4
1LCD-16X2SILKDisplays:LCD-16X2LCD1
1LM7805_TO220Package_TO_SOT_THT:TO-220-3_VerticalU6
1PN2222APackage_TO_SOT_THT:TO-92L_Inline_WideQ5
1ULN2003APackage_DIP:DIP-16_W7.62mm_LongPadsU2

More from jibonaronno/documentsA

12
  • 2 layers354.5 × 132.5 mmPanels001, the printed circuit board in 3D

    Panels001

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    308 parts4
  • 2 layers236.7 × 149.7 mmControllinoA, the printed circuit board in 3D

    ControllinoA

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    265 parts4
  • 2 layers237 × 132.5 mmPanel, the printed circuit board in 3D

    Panel

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    228 parts4
  • 4 layers30 × 72 mmESP32-P4-DevKit Rev C, the printed circuit board in 3D

    ESP32-P4-DevKit Rev C

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    164 parts4
  • 4 layers94 × 94 mmWalter feels, the printed circuit board in 3D

    Walter feels

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    153 parts4
  • 2 layersCabinate, the printed circuit board in 3D

    Cabinate

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    106 parts4
  • 4 layers24.2 × 30.9 mmWearable, the printed circuit board in 3D

    Wearable

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    97 parts4
  • 2 layersTIP122Board, the printed circuit board in 3D

    TIP122Board

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    82 parts4
  • 2 layersCabinate, the printed circuit board in 3D

    Cabinate

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    75 parts4
  • 2 layers122.5 × 174 mmSnifferA, the printed circuit board in 3D

    SnifferA

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    69 parts4
  • 2 layers166 × 160.6 mmSnifferA, the printed circuit board in 3D

    SnifferA

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    68 parts4
  • 4 layers26.1 × 32.5 mmReband, the printed circuit board in 3D

    Reband

    jibonaronno/documentsA

    It is required to change settings using SCLManager.exe when required for new setup.

    51 parts4

Similar boards

  • 2 layers100 × 100 mmZxevo1010 main, the printed circuit board in 3D

    Zxevo1010 main

    UzixLS/zxevo1010-board

    10x10cm PCB variant of ZX-Evolution project for G738/G706 enclosure

    252 parts26
  • 2 layers94 × 57.5 mmROM reader, the printed circuit board in 3D

    ROM reader

    trwgQ26xxx/FLT_module_reader

    Fiat Lancia Tester modules reader for ROMs preservation

    49 parts2
  • 2 layers99.8 × 99.8 mmVikings Robotics PCB, the printed circuit board in 3D

    Vikings Robotics PCB

    MrBruh/Vikings-Robotics-PCB

    A board with 2 ATMEGA microprocessors for controlling up to 7 DC motors and 4 servos

    261 parts1
  • 4 layers95.9 × 90.2 mmYkts payload, the printed circuit board in 3D

    Ykts payload

    cansat-ptl/cubesat-boards

    YKTSAT Kicad board files - mirror of https://git.yktaero.space/yktaero-dev/cubesat-boards

    156 parts
  • 4 layersRfsniffer, the printed circuit board in 3D

    Rfsniffer

    s3c/rfpirate

    General purpose ISM interfacing hardware based on the CC1101

    140 parts
  • 2 layers40 × 37 mmLidar, the printed circuit board in 3D

    Lidar

    le-flav-b/VEMAR

    Vehicle for Exploration, Mapping & Air-quality Recon 🪖

    35 parts1

Questions

How big is the Power PCB?

It measures 163.8 × 157.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Power use?

31 parts, built around the ATMEGA128A-AU, ULN2003A and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Power KiCad files?

From the jibonaronno/documentsA repository on GitHub, at the commit this page was made from: the board is uprojects/MAMPower/PowerPressA/Power/Power.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Power design in my own project?

Its repository states no licence, so its author keeps all rights: ask jibonaronno before reusing the design.