

808 Kick
Notes and documents for my modular synth build.
- Size
- 97.8 × 67.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 32
- Pads
- 137
- Tracks, vias
- 193, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Sep 2020
- Updated
- 9 May 2022
Overview
808 Kick is an open-source printed circuit board by jhitesma, from the jhitesma/Modular-Synth-Build repository on GitHub, published under the MIT licence. It is a 2-layer board of 97.8 × 67.3 mm with 56 parts on 32 nets, routed with 193 tracks and 10 vias.
Its parts include 23 resistors, 13 capacitors, 5 transistors, 3 diodes and 1 IC. It belongs with the audio and music boards of this library.
README
README.mdModular Synth Build
Just a place for me to record information about the modular synth I'm building. Documenting most of the build on the LMNK Forum.
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1, C3, C7, C9, C11 |
| 4 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4, R5, R21 |
| 4 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1, Q3, Q4, Q5 |
| 3 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R7, R12 |
| 3 | 15n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C2, C5, C6 |
| 3 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R14, R15 |
| 3 | D | Diode_THT:D_A-405_P7.62mm_Horizontal | D1, D2, D3 |
| 2 | 10uf | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C12, C13 |
| 2 | 22K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R11 |
| 2 | 47K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17, R19 |
| 2 | 680R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R20, R23 |
| 1 | 100K | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | Pitch1 |
| 1 | 10K | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | Level1 |
| 1 | 2.7K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | 20K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R22 |
| 1 | 2N3906 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q2 |
| 1 | 330K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16 |
| 1 | 33n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C4 |
| 1 | 33u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C10 |
| 1 | 4.7K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9 |
| 1 | 470K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R18 |
| 1 | 470n | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C8 |
| 1 | 500K | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | Decay1 |
| 1 | 5K | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | Tone1 |
| 1 | 6.8K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 1 | 8.2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | Clipper | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | SW1 |
| 1 | Eurorack Power | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 1 | LOGO | Fiducial:808_logo_4 | G*** |
| 1 | Output | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | Output1 |
| 1 | TL074 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U1 |
| 1 | Trigger | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | Trigger1 |
The 54 most common of 56 parts.
More from jhitesma/Modular-Synth-Build
2- 2 layers100 × 70 mm

- 2 layers100 × 70 mm

Similar boards
- 2 layers90 × 38 mm

LCD OLinuXino-5TS Rev.B
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
56 parts1.5k - 2 layers50.4 × 48.4 mm

Distortion
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
56 parts915 - 2 layers27 × 24.7 mm

- 2 layers123.9 × 94.4 mm

- 2 layers120.6 × 85.5 mm

KLOTZ
GEIGEIGEIST/KLOTZ
KLOTZ is 34 keys column-staggered split keyboard. It uses an encoder and three status LEDs on each side.
56 parts287GPL-3.0 - 2 layers136 × 91.7 mm

One
ergonautkb/one
Ergonaut One is an open-source ergonomic wireless split mechanical keyboard designed by Ergonaut Keyboards.
56 parts210CERN-OHL-P-2.0 - 2 layers78.5 × 69 mm

Kicad cpu board
matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
56 parts171 - 2 layers45 × 45 mm

Aeroq Hardware v3
EnriqueNeyra/Aeroq
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54
56 parts130
Questions
How big is the 808 Kick PCB?
It measures 97.8 × 67.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 808 Kick use?
56 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 808 Kick KiCad files?
From the jhitesma/Modular-Synth-Build repository on GitHub, at the commit this page was made from: the board is 808Kick/808_Kick/808_Kick.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 808 Kick design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).