2 layers85 × 40 mm
SnapNodes RP2
shBLOCK/TileGlobeMC
Project Structure ----- - tileglobe: game logic - datagen/mod: a fabric modding environment for extracting/generating data from vanilla (e.g.
168 parts21
2 layers50 × 45.3 mm
Tempic HW
jernej13/Tempic2Small solarpowered ESP32 based indoor/outdoor wifi weather station.
- Size
- 50 × 45.3 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 61
- Nets
- 60
- Pads
- 263
- Tracks, vias
- 425, 131
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 14 Sep 2026
- Updated
- 4 Oct 2026
Overview
Tempic HW is an open-source printed circuit board by jernej13, from the jernej13/Tempic repository on GitHub, published under the MIT licence. It is a 2-layer board of 50 × 45.3 mm with 61 parts on 60 nets, routed with 425 tracks and 131 vias.
It is built around the BME688, TPS631000DRL and BQ25504RGT, with the ESP32-C6-MINI-1, TPS62A01PDDC and ESDZV5-1BV2 among its other parts. Its parts include 20 resistors, 19 capacitors, 6 ICs, 4 connectors and 3 diodes. It belongs with the radio and wireless and home automation and IoT boards and the ESP32 and RISC-V boards of this library.
Main components
6
BME688
SMD-8P-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 2.1uA I2C、SPI ±0.5℃ ±3%RH SMD-8P Temperature and Humidity Sensor ROHSBosch SensortecTemperature And Humidity Sensor
TPS631000DRL
SOT-583-40℃~+125℃ 1.2V~5.3V 1.6V~5.5V 2.2MHz 2A 8uA Adjustable Buck-Boost Buck-Boost Built-in Overcurrent Protection、Light load efficient mode、Load disconnect SOT-583 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
BQ25504RGT
VQFN-16-EP(3x3)-40℃~+105℃ 130mV~3V、2.5V~5.25V 300mA 330nA Supercapacitor、Lithium Battery 可编程充电电流、过放保护 VQFN-16-EP(3x3) Battery Management ROHSTexas InstrumentsBattery Management
ESP32-C6-MINI-1
SMD,13.2x16.6mmSMD,13.2x16.6mm New Arrivals ROHSEspressif SystemsUncategorised
TPS62A01PDDC
TSOT-23-6UncategorisedTexas Instruments
ESDZV5-1BV2
01005-40℃~+150℃ 1 100nA 5.5V 5A@8/20us 5pF 7V Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS 01005 ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)
README
README.mdTempic
Small 50mm x 50mm solar powered ESP32c6 based indoor/outdoor WiFi/Zigbee sensor node.
Features
-
Onboard ESP32 C6 mini with
- WiFi 6 (2.4 GHz)
- Zigbee 3
- Bluetooth 5.3
-
BME688
- Temperature
- Humidity
- Pressure
- CO2
-
BMV080 (for outdoor use)
- P.M. 1.0
- P.M. 2.5
- P.M. 10
-
Small 5x5cm solar panel
-
Small 5x5cm LiPo battery
Goal is easy Home Assistant integration with unlimited battery life and cable-less deployment.
Roadmap
- Hardware 1.0
- Find suitable ICs
- Schematics 1.0
- Draw PCB 1.0
- Order prototype
- Assemble the PCB
- Test PCB
- Hardware 1.1
- Fix current PCB mistakes
- Order PCB
- Assemble and test PCB
- Firmware
- Basic test and demo of sensors
- Battery life optimization
- Add Wifi
- Setup connection to Home Assistant
- Add Zigbee
- (far) Add BLE peer to peer communication for bigger meshes
- Case
- 3d design case
- 3d print case
- Home assistant
- Figure out what is the best way to make it work (do not know if any custom plugins are necessary)
Schematics
View schematics in PDF format.
Developed in KiCad.
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C6, C12, C13, C14, C15, C16, C17, C18, C19 |
| 4 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C9, C10, C11 |
| 4 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C5, C7 |
| 3 | 2.8M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7, R19, R20 |
| 2 | 1u | Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L2, L3 |
| 2 | 4.42M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R5 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R13, R14 |
| 2 | 5.49M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R4 |
| 2 | 91k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R16, R18 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2, J3 |
| 2 | ESDZV5-1BV2 | Diode_SMD:Nexperia_DSN0603-2_0.6x0.3mm_P0.4mm | D2, D3 |
| 1 | |||
| 1 | 10M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4 |
| 1 | 217175-0001 | local:MOLEX_2169900001 | P1 |
| 1 | 22u | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | 287k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6 |
| 1 | 316k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10 |
| 1 | 32.7680k | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 4.02M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | 5.62M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11 |
| 1 | 511k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R17 |
| 1 | 7.2M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R9 |
| 1 | BME688 | local:BME688 | U6 |
| 1 | BMV080 | local:CON_5035661302_MOL | J1 |
| 1 | BQ25504 | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm | U2 |
| 1 | ESP32-C6-MINI-1 | RF_Module:ESP32-C6-MINI-1 | U5 |
| 1 | LED | LED_SMD:LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D1 |
| 1 | LiPo | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | MCP73831-2-MC | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.7x1.4mm | U1 |
| 1 | Solar_Cell | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SC1 |
| 1 | TPS62A01PDDC | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | TPS631000 | Package_TO_SOT_SMD:SOT-583-8 | U4 |
The 59 most common of 61 parts.
Questions
How big is the Tempic HW PCB?
It measures 50 × 45.3 mm and has 2 copper layers, 1 mm thick.
What parts does the Tempic HW use?
61 parts, built around the BME688, TPS631000DRL, BQ25504RGT and ESP32-C6-MINI-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tempic HW KiCad files?
From the jernej13/Tempic repository on GitHub, at the commit this page was made from: the board is Tempic-HW/Tempic-HW.kicad_pcb and its schematic Tempic-HW/Tempic-HW.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tempic HW design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers25.4 × 30.5 mm
- 4 layers40 × 40 mm
- 2 layers46.3 × 43.4 mm
Carbon
Enderman8843/Carbon
Carbon is an open-source indoor air quality sensing board designed for accurate VOC, temperature, and humidity monitoring.
38 parts1 - 4 layers51.6 × 60.6 mm
LoRaPowerBox
h0lad/LoRaPowerBox
The LoRaPowerBox combines the Heltec HT-CT62 module (ESP32C3 + Semtech SX1262) with a TI BQ25628E wide-range charger. Main target is IoT projects that deliver data over LoRa and/or Wifi utilizing solar power.
54 parts8CERN-OHL-S-2.0 - 2 layers40 × 125 mm
- 2 layers29.7 × 24.1 mm
- 4 layers42 × 65 mm
Icarus Flight Computer
daedalus-ind/icarus-hardware
Hardware of the onboard flight computer for the Icarus rocket.
106 parts2MIT